Nitsuko 124i/384i Software Manual

Feature Cross Reference
Data Communications Interface (DCI)
Telephone Programming Instructions
To enter data for Program 1201 (DCI Setup):
1. Enter the programming mode.
2. 1201 + HOLD
Type No?
3. Enter the DCI sub-type you want to program (1-10) + HOLD
You assign DCI software ports to sub-types in Program 1202.
Item No?
4. Select the register type you want to program (1 or 2) + HOLD
1 = DCI S-Registers, 2 = DCI LAPB Registers
Register No?
5. Enter the number of the register you want to program + HOLD...

1202 - DCI Port Type
 Sorts Data  Updates CEU
✔  Can be Copied
Description
 124i Available — 72 DCI software ports. 384i Available — 288 DCI software ports.
Additional port types are available in
system software 3.04 and higher.
SBFor each DCI software port (1-144 and 145-288 in 384i, 1-72 in 124i), use Program 1202 - DCI Port Type to
assign the DCI port type (RS-232-C or Centronics) and the DCI sub-type. Available types are:
•0 (None)
•1 (DCI connected to RS-232 DTE port)
•2 (DCI connected to...

1203 - DCI Tenant Group
✔ Sorts Data  Updates CEU
✔  Can be Copied
Description
 124i Not available. 384i Available — 288 DCI software ports
and four Tenant Groups.
INUse Program 1203 - DCI Tenant Group to assign a DCI software port (1-144, 145-288) to a Tenant Group (1-
4). Refer to the Order option in Program 0005 for the DCI software port number.
Conditions
None
Feature Cross Reference
Data Communications Interface (DCI)
Telephone Programming Instructions
To enter data for Program 1203 (DCI Tenant...

1204 - DCI Department Group
✔  Sorts Data   Updates CEU   Can be Copied
Description
 124i Available — 72 DCI software ports
and eight DCI Department Groups. 384i Available — 288 DCI software ports
and 32 DCI Department Groups.
INUse Program 1204 - DCI Department Group to set up DCI Department Groups. The system allows up to 32 DCI
Department Groups in 384i and eight in 124i. This program also lets you assign the priority of each DCI software
port within a DCI Department Group. When calling a DCI...

1205 - DCI Toll Restriction Class
 Sorts Data  Updates CEU
✔  Can be Copied
Description
 124i Available — eight DCI Toll
Restriction classes. 384i Available — 15 DCI Toll Restriction
Classes.
INUse Program 1205 - DCI Toll Restriction Class to set the Toll Restriction Class (1-15 in 384i, 1-eight in 124i)
for each DCI software port. The system uses Toll Restriction Class for outgoing (trunk) data calls. Toll Restric-
tion Class does not affect internal data calls. For each DCI software port, you make...

13. HOLD
DCI No?
14. Repeat from step 3 to program another DCI software port.
OR
HOLD to exit.
1200 - DCI Options
1205 - DCI Toll Restriction Class
940   PROGRAMMING 92000SWG08  Issue 1-0 

1206 - Initialize DCI
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Available — 72 DCI software ports . 384i Available — 288 DCI software ports
INAfter changing the register values in Program 1201, use Program 1206 - Initialize DCI  to initialize the DCI
software port changed. You must initialize a DCI software port before the changes you made in Program 1201
will take effect. In 384i, refer to the Order option in Program 0005 for the DCI software port number. In 124i,
the DCI software...

1207 - DCI Hotline Setup
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Available — 24 Hotline pairs. 384i Available — 50 Hotline pairs in each
of four Tenant Groups.
INUse Program 1207 - DCI Hotline Setup to set up a DCI Hotline (nailed-up connection) between an exten-
sion with a DCI Module and a destination DCI. When the user at the DCI Hotline originator presses the data
key, the system automatically calls the programmed destination. In 384i, each Tenant Group has 50 Hotline pairs...

1300 - ACI Options1301 - ACI Port Function
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Available — six ACI software ports
(2 3-ACI Modules max.). 384i Available — 192 ACI software ports
(64 3-ACI Modules max.).
INUse Program 1301 - ACI Port Function to set the function of each software port on an Analog Communica-
tions Interface. Each ACI software port can have only one function (input, output or none). In 384i, refer to the
Order option in Program 0005 for the ACI software port...

1302 - ACI Tenant Group
✔  Sorts Data   Updates CEU   Can be Copied
Description
 124i Not available. 384i Available — 192 ACI software ports
(64 3-ACI Modules max.).
INUse Program 1302 - ACI Tenant Group to assign an ACI software port (1-192) to a Tenant Group (1-4). Refer
to the Order option in Program 0005 for the ACI software port number.
Conditions
None
Feature Cross Reference
Analog Communications Interface (ACI)
Telephone Programming Instructions
To enter data for Program 1302 (ACI Tenant...