Nitsuko 124i/384i Software Manual

1610 - Combined Paging Assignments
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Available — eight Internal Paging
zones and eight External Paging
zones. 384i Available — 32 Internal Paging
zones and eight External Paging
zones. Make a separate entry for
each of the four Tenant Groups.
SA
Use Program 1610 - Combined Paging Assignments to assign an External Paging Zone (1-8) to an Internal
Paging Zone (1-32 in 384i, 1-8 in 124i) for Combined Paging. When an extension user makes a Combined...

4. Enter the External Paging Zone you want to program + HOLD
Enter 1-8 for External Zones 1-8 or 0 for External All Call Paging.
Group No:
The previously programmed assignment displays.
5. Enter the Internal Paging Zone you want assigned to the External Zone you entered in step 4 + HOLD
In 384i, enter 1-32 for Internal Zones 1-32 or 0 for Internal All Call Paging.
In 124i, enter 1-8 for Internal Zones 1-8 and 0 for Internal All Call Paging.
6. Repeat from step 4 to select another External Paging Zone....

1700 - Pooled Modem Options  
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Not available. 384i Not available.
INThe 1700 - Pooled Modem Options are not used.
1700 - Pooled Modem Options
  
92000SWG08   Issue 1-0 PROGRAMMING   967 

— For Your Notes —
1700 - Pooled Modem Options
  
968   PROGRAMMING 92000SWG08   Issue 1-0 

1800 - DISA, OPA and DID1801 - DISA Password
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Available — 15 users and 10 DISA
Classes of Service. 384i Available — 15 users and 15 DISA
Classes of Service in each of four
Tenant Groups.
INUse Program 1801 - DISA Password to set the 6-digit DISA password and the DISA Class of Service for each
user. In 384i, there are 15 users per Tenant Group, with one password and one DISA Class of Service assign-
ment (from 1-15) for each user. This allows...

10. Repeat from step 4 and select another user
OR
HOLD + Repeat from step 3 to select another Tenant Group.
OR
HOLD + HOLD to exit.
1800 - DISA, OPA and DID
1801 - DISA Password
970   PROGRAMMING 92000SWG08   Issue 1-0 

1802 - DISA and OPA Operating Mode
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Available — one Tenant Group. 384i Available — with a unique entry for
each of four Tenant Groups.
INUse Program 1802 - DISA and OPA Operating Mode to set the operating mode of each DISA trunk. This sets
what happens to the call when the DISA or Automated Attendant (OPA) caller calls a busy or unanswered exten-
sion, dials incorrectly or waits too long to dial. The call can either disconnect (0) or Transfer...

Mode(REST) :
12. For the Operating Mode selected, enter 0 to disconnect or 1 to Transfer in the Rest Mode.
13. HOLD
Item No?
14. Repeat from step 4 to enter another DISA Operating Mode.
OR
HOLD + Repeat from step 3 to program another Tenant Group.
OR
HOLD + HOLD to exit.
1800 - DISA, OPA and DID
1802 - DISA and OPA Operating Mode
972   PROGRAMMING 92000SWG08   Issue 1-0 

1803 - DISA and OPA Transfer Destination
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Available — 52 trunks and 16 Ring
Groups. 384i Available — 128 trunks and 128
Ring Groups. Voice Mail destination
requires system software 3.04 or
higher.
INUse Program 1803 - DISA and OPA Transfer Destination to set the transfer destination for each DISA and
Automated Attendant (OPA) trunk. In 384i prior to system software 3.04 and in 124i, the destination can be a
Ring Group (1-128 in 384i, 1-16 in...

11. HOLD
TRK Port No?
12. Repeat from step 3 to program another trunk.
OR
HOLD to exit.
1800 - DISA, OPA and DID
1803 - DISA and OPA Transfer Destination
974   PROGRAMMING 92000SWG08   Issue 1-0