Nitsuko 124i/384i Software Manual

2200 - VAU Module Options2201 - VAU Initialization
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Available. 384i Available.
INUse Program 2201 - VAU Initialization to initialize (erase) the VAU messages. You must initialize after in-
itially installing a VAU Module. You can also initialize any time you want to erase your VAU messages and start
over. There are three initialization options :
Initialization 
OptionDescription
1 Erase all VAU messages and Personal Greetings
2 Erase only VAU...

2202 - VAU Message Length
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Available. 384i Available.
INUse Program 2202 - VAU Message Length to set the maximum length of VAU messages (Item 1) and Personal
Greetings (Item 2). The range is from 1 to 225 seconds.
Conditions
None
Feature Cross Reference
Voice Announce Unit
Telephone Programming Instructions
To enter data for Program 2202 (VAU Message Length):
1. Enter the programming mode.
2. 2202 + HOLD
Item No?
3. Enter 1 + HOLD to set the...

2203 - General Message Number
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Available. 384i Available — with a separate entry
for each of the four Tenant Groups.
INUse Program 2203 - General Message Number to specify the VAU message number (01-16) you want to use
for the General Message. In 384i, you make a separate entry for each Tenant Group (1-4).
Conditions
None
Feature Cross Reference
Voice Announce Unit
Telephone Programming Instructions
To enter data for Program 2203 (General...

2204 - VAU No Answer Destination
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Available — 16 Ring Groups. 384i Available — 128 Ring Groups with a
separate entry for each of the four
Tenant Groups.
INUse Program 2204 - VAU No Answer Destination to set the VAU No Answer Destination Ring Group (1-128).
When all VAU ports are busy, incoming DILs and DISA calls wait for the VAU No-Answer Time (Program
0405 Item 63) and then ring the VAU No Answer Destination Ring Group. In 384i, you make a...

2205 - OPA Message Assignment
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Available — 52 trunks. 384i Available — 128 trunks.
INUse Program 2205 - OPA Message Assignment to assign the VAU message (1-16) an outside caller hears
when their call is answered by the Automated Attendant (OPA). When programming, you make a separate entry
for each Night Service mode:
DAY = Day Mode
NIT = Night Mode
MID = Midnight Mode
REST = Rest Mode
Conditions
None
Feature Cross Reference
Voice Announce...

2206 - 
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Not available. 384i Not available.
This program is not used.
2200 - VAU Module Options
2206 - 
1020   PROGRAMMING 92000SWG08   Issue 1-0 

2207 - 900 Preamble
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Available — 52 trunks. 384i Available — 128 trunks.
INUse Program 2207 - 900 Preamble to assign the 900 preamble to trunks. For each trunk that should have the
900 Preamble, enter the number of the VAU message (1-16) that is your recorded preamble message. Enter 0 for
no preamble.
Conditions
None
Feature Cross Reference
Voice Announce Unit
Telephone Programming Instructions
To enter data for Program 2207 (900 Preamble):
1....

2208 - VAU Password
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Available. 384i Available.
INUse Program 2208 - VAU Password to enter the password DISA callers must dial before the system will allow
them to record, listen to and or erase the VAU messages.
Conditions
None
Feature Cross Reference
Direct Inward System Access (DISA)
Telephone Programming Instructions
To enter data for Program 2208 (VAU Password):
1. Enter the programming mode.
2. 2208 + HOLD
Password:
3. Enter the password...

2209 - OPA Error Message Assignment
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Available— 52 trunks. 384i Available — 128 trunks.
INUse Program 2209 - OPA Error Message Assignment to assign the OPA error message. For each trunk
that the VAU Automated Attendant will answer, enter the VAU message (1-16) the outside caller hears if
they dial incorrectly. If you enter 0 (i.e., no error message), the call reroutes according to Program 1802
Item 3 and Program 1803.
For each trunk, you make...

TRK No?
12. Repeat from step 3 to program another trunk.
OR
HOLD to exit.
2200 - VAU Module Options
2209 - OPA Error Message Assignment
1024   PROGRAMMING 92000SWG08   Issue 1-0