Nitsuko 124i/384i Software Manual

2000 - Copy and Clear Options2001 - Copy Command
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Available — 96 extension/virtual
extension ports and 52 trunk ports. 384i Available — 384 extension/virtual
extension ports and 128 trunk ports.
INUse Program 2001 - Copy Command to copy an extension’s programming to another extension. This can save
time during system setup for extensions that have similar programming. You can copy any of the commands in
the following chart:
Conditions
None...

The source can be a trunk port (1-128 in 384i, 1-52 in 124i), an extension port (1-256 in 384i, 1-
72 in 124i), a virtual extension port (257-384 in 384i, 73-96 in 124i) or a DCI software port (1-288
in 384i, 1-72 in 124i).
from ?
5. Specify the beginning of the destination range + HOLD
If your destination range is trunk ports 010-020, for example, enter 010 for this option.
to ?
6. Specify the end of the destination range + HOLD
If your destination range is trunk ports 010-020, for example, enter 020...

2002 - Initialize Extension Numbers and Names
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Available. 384i Available.
INUse Program 2002 - Initialize Extension Numbers and Names to initialize the system’s extension numbers
and names. This option applies to telephone, DCI and ACI extensions. After initialization, only the extension
connected to port 1 (extension 301) functions.
Conditions
You can only implement this option from extension port 1.
Feature Cross Reference
None
Telephone...

2003 - Initialize Service Codes
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Available. 384i Available.
INUse Program 2003 - Initialize Service Codes to initialize the system’s Service Codes. 
!!  CAUTION  !!
After initialization, only the Program Entry Service Code (#*#*) remains.
Conditions
None
Feature Cross Reference
Flexible System Numbering
Telephone Programming Instructions
To enter data for Program 2003 (Initialize Service Codes):
1. Enter the programming mode.
2. 2003 + HOLD...

2100 - Automatic Route Selection2101 - ARS Call Route Options Table
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Available — 16 Trunk Groups. 384i Available — 128 Trunk Groups.
INUse Program 2101 - ARS Call Route Options Table to specify the routing options for the 64 Selection Num-
bers. Options include:
•Rate Period (1-8)
•ARS Class of Service (0-27)
•Service Number (Trunk Groups 1-128 in 384i, 1-16 in 124i)
•Dial Treatment (0-15)
Conditions
None
Feature Cross Reference
Automatic...

2102 - ARS Six Digit Table
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Available. 384i Available.
INUse Program 2102 - ARS Six Digit Table to set up the ARS Six Digit Table. This gives ARS the capability to
route a call based on both the NPA and NNX a user dials. During programming, you set up an NNX list for each
NPA you enter in the Six Digit Table.
Conditions
None
Feature Cross Reference
Automatic Route Selection
Telephone Programming Instructions
To enter data for Program 2102 (ARS...

2103 - ARS Three Digit Table
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Available. 384i Available.
INUse Program 2103 - ARS Three Digit Table to set up the ARS Three Digit Table. Normally, the Three Digit Ta-
ble sets the routing for the majority of NPA calls. It also sets the routing for all 1 + NNX calls (unless overridden
by Separate Routing in Program 2108).
Conditions
None
Feature Cross Reference
Automatic Route Selection
Telephone Programming Instructions
To enter data for...

2104 - Conflict Area
  Sorts Data   Updates CEU   Can be Copied
Description
 124i No available. 384i Available.
INUse Program 2104 - Conflict Area to indicate if the system is in a conflict or non-conflict area.
Conditions
None
Feature Cross Reference
Automatic Route Selection
Telephone Programming Instructions
To enter data for Program 2104 (Conflict Area):
1. Enter the programming mode.
2. 2104 + HOLD
Conflict Area:
3. Enter 0 if system is in a non-conflict area; enter 1 if system is in a conflict...

2105 - Minimum COS for Dialing 976
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Available. 384i Available.
INUse Program 2105 - Minimum COS for Dialing 976 to allow or restrict ARS users from dialing exchange 976
services. The system restricts according to the extension’s ARS Class of Service (set in Program 2110). Exten-
sions with an ARS Class of Service higher than the Program 2105 entry cannot dial 976. Extensions with an
ARS Class of Service equal to or lower than the Program 2105...

2106 - ARS Rate Period Table
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Available. 384i Available.
INUse Program 2106 - ARS Rate Period Table to define the ARS Rate Periods (1-8). You can define up to eight
Rate Periods for different times of the day and days of the week. ARS divides the day into 48 1/2 hour Time of
Day Patterns. During programming, you assign one of the eight Rate Periods to each of the 48 Time of Day Pat-
terns. The table below shows the default rate periods....