Nitsuko 124i/384i Software Manual

2503 - PC Attendant Console Options
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Not available. 384i Available — Item 1 (Attendant
Camp On) only.
INUse Program 2503 - PC Attendant Console Options to assign various options for the PC Attendant Console.
The entries you make in this program affect all the system’s consoles. Refer to the table below for the descrip-
tion of each item, its data entry range and its default value.
PC Attendant Console Options
Item Description Range Default...

— For Your Notes —
2500 - PC Attendant Options
2503 - PC Attendant Console Options
1046   PROGRAMMING 92000SWG08   Issue 1-0 

2600 - T1 Options2601 - T1 Setup
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Available — 52 trunks. 384i Available — 128 trunks.
INUse Program 2601 - T1 Setup to designate the trunks on the T1/PRI Interface PCB for loop start (0) or ground
start (1) operation. You can make a different assignment for each trunk on each T1/PRI Interface PCB.
Conditions
None
Feature Cross Reference
T1 Trunking (with ANI/DNIS Compatibility)
Telephone Programming Instructions
To enter data for Program 2601...

2602 - T1 Clock Source
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Available — three maximum PCBs
per system. 384i Available — five maximum PCBs
per system.
INUse Program 2602 - T1 Clock Source to select the clock source for each T1/PRI Interface PCB. The clock
source can be internal (1) or external (2). If set for internal, the PCB uses its own clock. If set for external, the
PCB uses the clock provided by the telco.
Conditions
None
Feature Cross Reference
T1 Trunking (with ANI/DNIS...

3000 - Account Codes3001 - Account Code Setup
Description
 124i Available with Base 4.02 or higher
and EXCPRU 4.02 or higher. In
earlier versions, use Program 0407
instead. 384i Available with system software
3.07.10 or higher. In earlier versions,
use Program 0407 instead.
INUse Program 3001 - Account Code Setup to set various Account Code options for an extension’s Class of Serv-
ice. Assign Class of Service to extensions in Program 1005 - Class of Service. The 384i has 15 Classes of Serv-
ice in...

4. For the Tenant Group selected, enter the number of the Class of Service (1-15) you want to program +
HOLD
Item No?
5. Enter the number of the item you want to program + HOLD
Item_nnn:n
The previously programmed value displays.
6. Enter data (see the chart above) for the item selected + HOLD
7. Return to step 5 and select another item number.
OR
HOLD + Return to step 4 and select another Class of Service
OR
HOLD + HOLD to return to step 3 and select another Tenant Group.
OR
HOLD three times to exit....

3002 - Verified Account Code Table
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Available — requires Base 4.02 or
higher and EXCPRU or higher. 384i Available — requires system
software 3.07.10 or higher.
INUse Program 3002 - Verified Account Code Table to enter Account Codes into the Verified Account Code list.
You can enter up to 1000 codes from 3-16 digits long, using the characters 0-9 or #. Use the FLASH key to enter
a wild card. For example, the entry FLASH234 means the user can...

– For Your Notes –
3000 - Account Codes
3002 - Verified Account Code Table
1052   PROGRAMMING 92000SWG08   Issue 1-0 

        
Using the Default Settings Table
A few simple rules . . .
1. If a cell is blank, it uses the entry in the cell to the left. For example, the default Program 0101 Duration
interval is 10 for all columns.
2. If an entry had a different value in a prior software level, the historical entry is shown in a row just be-
low the current entry. Look at Program 0401 Item 2 as an example.
•In software levels prior to 124i EXCPRU 2.18, the entry was 0.
•The remainder of the row is shaded in gray to indicate...

   
     
1054   PROGRAMMING 92000SWG08   Issue 1-0