Nitsuko 124i/384i Software Manual

2402 - Caller ID Table Entries
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Available — 200 Caller ID Table
entries. 384i Available — 1000 Caller ID Table
entries.
INUse Program 2402 - Caller ID Table Entries to create a database of incoming Caller ID numbers (DNs) and as-
sociated names. This is important for Single Message Format calls. With these types of calls, the telco only sup-
plies the incoming number — not the name. The system looks up the DN in the Caller ID Table and sends...

Keys for Entering Names
Use this key . . . When you want to . . .
CLEAR Clear the text entry if you want to start over.
Dialpad digits 0-9, #
and *.Enter numbers, # and * as part of the name. You don’t need
to press CHECK after entering these characters.
Conditions
None
Feature Cross Reference
Caller ID
Telephone Programming Instructions
To enter data for Program 2402 (Caller ID Table Entries):
1. Enter the programming mode.
2. 2402 + HOLD
Bin No?
3. Enter the address of the Caller ID Table entry you...

2403 - Caller ID Printer Port
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Available — DCI software ports are
1-72. 384i Available — DCI software ports are
1-288, Make a separate entry for
each of the four Tenant Groups.
INUse Program 2403 - Caller ID Printer Port to assign the DCI software port number the system will use to out-
put Caller ID information. In 384i, the DCI Module  software port numbers are 1-144. The 3-DCI Unit software
port numbers are 145-288. You can have a different...

2404 - ANI/DNIS Service Options
  Sorts Data   Updates CEU   Can be Copied
Description
 124i ANI/DNIS Compatibility requires
EXCPRU 2.18 or higher. It is not
available in Base software. 384i Available — requires system
software 3.06.02 or higher.
INUse Program 2404 - ANI/DNIS Service Options to set the service options for T1 ANI/DNIS trunks.
ANI/DNIS trunks must be immediate start or wink start T1 trunks with E&M signaling. The system allows 15
distinct ANI/DNIS Service Options. You assign ANI/DNIS...

ANI/DNIS Service Options
Option Description Range Default
Item 4Route Data
The option sets how the system uses the route data
(gathered in Item 3) to route incoming ANI/DNIS calls.
The choices are:
0 = Dial Data (From Caller ID Table Name Field)
The system uses the Caller ID Table specified in Item 7
below for inbound routing. The data in the Caller ID
Table Name field is used as dial data for routing. For this
entry, the Name field entry can be an extension number, a
Department Group pilot number or the...

ANI/DNIS Service Options
Option Description Range Default
Item 6ANI Caller ID Table Setup
Use this option to define which part of the Caller ID
Table set up in Program 2402 the system will use for
ANI/DNIS Caller ID lookups. This is required if Items 4
and 5 above are 1 (Caller ID On). When you specify a
starting address and length, the system uses that part of
the table for lookups.Start Address
= 000-999
Length =
0000-1000Start Address
= 0000
Length = 1000
Item 7ANI Routing Table Setup
Use this option...

Telephone Programming Instructions
To enter data for Program 2404 (ANI/DNIS Service Options):
1. Enter the programming mode.
2. 2404 + HOLD
Option:
3. Enter the ANI/DNIS Service Option you want to program (1-15) + HOLD
Item:
4. Enter the number of the item you want to program + HOLD
Item_nn:
5. Enter data for the item you selected + HOLD
Item:
6. Repeat from step 4 to program another item.
OR
HOLD + Repeat from step 3 to select another ANI/DNIS Service Option.
OR
HOLD + HOLD to exit.
2400 - Caller ID...

— For Your Notes —
2400 - Caller ID Options
2404 - ANI/DNIS Service Options
1042   PROGRAMMING 92000SWG08   Issue 1-0 

2500 - PC Attendant Options2501 - PC Attendant Console Port Assignment
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Not available. 384i Available — 256 extension ports.
INUse Program 2501 - PC Attendant Console Port Assignment to assign an extension port (1-256) to each PC
Attendant Console. You can install up to two consoles in the system.
Conditions
None
Feature Cross Reference
PC Attendant Console
Telephone Programming Instructions
To enter data for Program 2501 (PC Attendant Console...

2502 - PC Attendant Console Tenant
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Not available. 384i Available — two PC Attendant
Consoles allocated among the four
Tenant Groups.
INUse 2502 - PC Attendant Console Tenant to assign the PC Attendant Consoles to the four Tenant Groups. A
console can belong to any combination of Tenant Groups. For each Tenant Group, enter the Remote Service Cen-
ter telephone number. This is the number the system dials for Automatic Fault Reporting. The...