Nitsuko 124i/384i Software Manual

Programming (Cont’d)
384i Prior to System Software 3.04 Only
Yes
No Unanswered Immediate Both RingingNoYes
Stop
In 0405 Item 1, enter the
correct Delayed Call
Forwarding Time.
Does Forwarding When
Unanswered occur after the
proper delay interval?
In 1027, enter the
destination port and enter
Type 2.
In 1027, enter the
destination port and enter
Type 3.In 1027, assign the
destination port and enter
Type 1.
In 1029, assign the
destination port for each
extension port.Do you want Forwarding
When Busy?
Do...

Related Features
Alphanumeric Display
When a call is Fixed Call Forwarded, the display at the destination shows from which extension the call
was routed.
Call Forwarding
User entered Call Forwarding overrides Fixed Call Forwarding.
Call Forwarding, Off-Premise
An extension user can forward their calls to an outside telephone number.
Multiple Directory Numbers
Virtual extension numbers follow Fixed Call Forwarding.
Operation
None
Features B-D
Call Forwarding, Fixed
122   FEATURES92000SWG08   Issue 1-0 

Call Forwarding, Off-Premise
Description
 124i  Available. 384i Available — system software prior
to 3.04 uses different procedures. 
- DSL sets require Base 2.13,
EXCPRU 2.18 or higher.- DSL sets require system software
3.06.02 or higher.
Off-Premise (OPX) Call Forwarding allows an extension user to forward their calls to an off-site location. By
enabling OPX Call Forwarding, the user can stay in touch by having the system forward their calls while they
are away from the office. The forwarding...

Programming (Cont’d)
Related Features
Call Forwarding, Fixed
Fixed Call Forwarding can automatically forward an extensions calls to an outside number.
Toll Restriction
The outside number OPX Call Forwarding dials can only be a number normally allowed by the for-
warded extension’s Toll Restriction.
Voice Announce Unit (VAU)
In systems with a VAU, callers to an extension forwarded off-premise hear, Please hold on, your call is
being rerouted.
Stop
In 0901 Item 31, enable loop
supervision (1) for each...

Programming (Cont’d)
➣
0406 - COS Options, Item 128: Off-Premise Call Forwarding
In an extensions Class of Service, enable (1) or disable (0) setting up Call Forwarding Off-Premise at the
extension. This option requires system software 3.04 or higher.
➣0901 - Basic Trunk Port Setup (Part A), Item 31: Loop Supervision
Enable (1) loop supervision for each trunk that should be able to use Call Forwarding Off-Premise.
➣1005 - Class of Service
Assign Class of Service (1-15) to an extension.
➣1006 -...

Operation (Cont’d)
(384i Prior to System Software 3.04)
To forward your calls off-premise:
1. At keyset, press idle CALL key.
OR
At single line set, lift handset.
2. Dial *46.
3. Dial the access code for the trunk over which your call should route:
•#9 and the trunk number (001-128) for a specific trunk
•804 and trunk group number (1-9, 01-99 or 001-128)
•9 for ARS or Trunk Group Routing
4. Dial the destination phone number.
To enter a pause in the destination phone number, press MIC.
5. At keyset, press...

Call Forwarding with Follow Me
Description
 124i Available 384i Available — system software prior
to 3.04 uses different procedures.
While at a co-worker’s desk, a user can have Call Forwarding with Follow Me redirect their calls to the co-worker’s
extension.  This helps an employee who gets detained at a co-worker’s desk longer than expected.  To prevent losing
important calls, the employee can activate Call Forwarding with Follow Me from the co-worker’s phone.
Call Forwarding with Follow Me reroutes...

Programming (Cont’d)
➣
0406 - COS Options,, Item 26: Call Forwarding with Follow Me
In an extension’s Class of Service, allow (1) or prevent (0) the setting of Call Forwarding with
Follow Me.
➣1005 - Class of Service
Assign a Class of Service (1-15) to an extension.
➣(384i Prior to 3.04) 1006 - Programming Function Keys
Assign a function key for Call Forwarding with Follow Me (code 1001).
➣(384i 3.04 or higher and 124i) 1006 - Programming Function Keys
Assign a function key for one-touch access to the...

Operation (Cont’d)
384i System Software Prior to 3.04
To activate Call Forwarding with Follow Me:
Use this procedure at the extension that will receive Forwarded calls (destination).
1. At keyset, press Follow Me key (PGM 1006 or SC 851:  1001).
OR
At keyset, press idle CALL key and dial *23.
OR
At single line set, lift handset and dial *23.
2. Dial 1 to set Call Forwarding.
3. Dial the extension who’s calls you want to intercept (source).
Repeat steps 1-3 to enable Call Forwarding with Follow Me for...

Call Forwarding/Do Not Disturb Override
Description
 124i Available. 384i Available.
An extension user can override Call Forwarding or Do Not Disturb at another extension.  This is helpful, for ex-
ample, to dispatchers and office managers that always need to get through.
Conditions
None
Default Setting
•Disabled.
Programming
Yes No No Yes
Stop
In 1006, assign a Call
Forwarding/DND Override
key (code 1022).
Should extension
have one-button
access to Call
Forwarding/DND
Override?
In 1005, assign
Class...