Home > Nitsuko > Communications System > Nitsuko 124i/384i Software Manual

Nitsuko 124i/384i Software Manual

Here you can view all the pages of manual Nitsuko 124i/384i Software Manual. The Nitsuko manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 131

Programming (Cont’d)
Call Route Options Worksheet
Selection Number (1-64)
Rate Period (1-8)
Service Number (1-128) Dial Treatment (1-15)
Class of Service 00 
Class of Service 01
Class of Service 02
Class of Service 03
Class of Service 04
Class of Service 05
Class of Service 06
Class of Service 07
Class of Service 08
Class of Service 09
Class of Service 10
Class of Service 11
Class of Service 12
Class of Service 13
Class of Service 14
Class of Service 15
Class of Service 16
Class of Service 17
Class of...

Page 132

Programming (Cont’d)
➣
0116 - Tone Detection Setup
Use Items 11-32 to set the criteria for dial tone detection for outgoing ARS calls. This capability requires
384i system software 3.04 or higher.
➣0401 - Tenant Group Options (Part A), Item 21: ARS Enable
Enable (1) or disable (0) ARS for each tenant.
➣0402 - Tenant Group Options (Part B), Item 7: ARS Misdialed Call Handling
When a user dials a call not programmed in ARS, specify if the system should route the call over Trunk
Group 1 (0) or play error...

Page 133

Programming (Cont’d)
➣
2108 - Separate ARS Routing Options
Program unique routing for:
- Operator-assisted (0+) calls
- International (011) calls
- Directory assistance (411, 1411 and 555) calls
- Equal Access (10XXX + 0 or 1) calls
- Emergency (911) calls
➣2109 - ARS Authorization Codes
Enter ARS Authorizations Codes for each extension.  ARS Dial Treatments may require users to enter
Authorization Codes before dialing.
➣2110 - ARS Class of Service
Set an extension’s ARS Class of Service.  Automatic...

Page 134

— For Your Notes —
Features A
Automatic Route Selection
104   FEATURES92000SWG08  Issue 1-0 

Page 135

Features B-DBackground Music
Description
 124i Available. 384i Available.
Background Music (BGM) sends music from a customer-provided music source to speakers in keysets.  If an ex-
tension user activates it, BGM plays whenever the user’s extension is idle. 
The method the system uses to provide Background Music (and Music on Hold) depends on the setting of a
jumper on the CPRU PCB, how the music source is connected and the setting in program 0914. The table below
shows how these settings interact....

Page 136

BGM/MOH Operation Matrix
To get this result . . . Set these options . . .
CPRU S Jumper External Music Source Program
0914
INT EXT MOH (1&2) BGM (5&6)
MOH for Intercom Calls
 Internally synthesized 1
MOH for Trunk Calls
 Internally synthesized 1
Background Music
  From connected music source✔✔254
MOH for Intercom Calls
  From connected music source
MOH for Trunk Calls
  From connected music source
Background Music
 None✔✔
 1254
MOH for Intercom Calls
 None
MOH for Trunk Calls
 None
Background Music...

Page 137

Programming
➣
0406 - COS Options, Item 53: Background Music
In an extension’s Class of Service, allow (1) or prevent (0) an extension from turning Background Music
on and off.
➣1005 - Class of Service
Assign a Class of Service (1-15) to an extension.
Related Features
Music on Hold
The system can broadcast music to callers on Hold.
Single Line Telephones
Background Music is not available on single line telephones.
Operation
To turn Background Music on or off:
1. Press idle CALL key.
2. Dial 825.
3. Press...

Page 138

Barge In
Description
 124i Available. 384i Available.
- In Base 4.02 and EXCPRU 4.02
and higher, turning off the Barge In
tones also turns off the called
extension’s display.- In system software 3.07.10 and
higher, turning off the Barge In tones
also turns off the called extension’s
display.
- Users cannot dial the Barge In code
(810) before calling a busy extension.- System software 3.07.24 and higher
allows users to dial the Barge In
code (810) before calling a busy
extension.
- Users can Barge In...

Page 139

Programming
Start
Should extension
being Barged In on
hear warning tones?
Should an extension
be allowed to initiate
Barge In?
Should an extension
be called to receive
Barge in?
Should Barge In use
Speech Mode or
Monitor (Silent
Monitor) Mode?
Should extensions
have single-digit
Barge In access?
In 1005, assign Class of
Service to extensions.
Should extensions
have one-button
Barge In access?In 1006, assign a
function key as a
Barge In key (code
1019).
Stop
In 0401:5, enter 1.In 0401:5, enter 0.
In...

Page 140

Programming (Cont’d)
➣
0401 - Tenant Group Options (Part A), Item 5: Barge In Tone
Enable (1) or disable (0) the Barge In Tone. If disabled, this also turns off the Barge In display at the
called extension.
➣0405 - System Timers (Part A), Item 61, Barge In Tone Repeat Time
After a user Barges In, the system repeats the Barge In tone after this interval. Normally, you should dis-
able this timer by entering 0.
➣0406 - COS Options, Item 44: Barge In Mode
In an extension’s Class of Service, enable the Barge...
Start reading Nitsuko 124i/384i Software Manual

Related Manuals for Nitsuko 124i/384i Software Manual

All Nitsuko manuals