Nitsuko 124i/384i Software Manual

Call Coverage
Please refer to the Multiple Directory Number / Call Coverage
on page 368 for information on this feature.
Features B-D
Call Coverage
92000SWG08   Issue 1-0FEATURES   111 

Call Forwarding
Description
 124i Available. 384i Available.
- Base software prior to 1.2R uses
different dial codes.- System software prior to 3.04 uses
different dial codes.
- COS control for reminder messages
requires system software 2.13 Base,
2.18 EXCPRU or higher.- COS control over reminder message
requires system software 3.04 or
higher.
Call Forwarding permits an extension user to redirect their calls to another extension.  Call Forwarding ensures
that the user’s calls are covered when they are...

Programming
— For Older Systems —
NoYes No YesNo YesNo Yes
In 0406 Item 32,
enter 0.
In 1006, assign a Call Forwarding
Immediately key (code 1055).Do you want one-button access to
call Forwarding Immediately
(Service Code *24)?
StopIN 1005, assign Class of
Service to extensions.
In 0405 Item 1, set the Delayed Call
forwarding Time.  Unanswered calls
forward after this interval.(Optional) For one-button access, in
1006 assign a Call Forwarding when
Unanswered key (code 1003).
In 0406 Item 32,
enter...

Programming (Cont’d)
— For Current Systems —
Start
Should extension be
able to use Call
Forwarding with Both
Ringing?
In 0406:23, enter 1.In 0406:23, enter 0.
Should extension be able
to use Call Forwarding
when Busy?In 0406:31, enter 1.In 0406:31, enter 0.
Should extension be
able to use Call
Forwarding when
Unanswered?
In 0406:32, enter 1.In 0406:32, enter 0.
In 0405:1. set the Delayed
Call Forwarding Time.
Unanswered calls forward
after this interval.
Do you want one-button
access to the Call...

Programming (Cont’d)
➣
0405 - System Timers (Part A), Item 1: Delayed Call Forwarding Time
Set the Delayed Call Forwarding interval.  For an unanswered call, Call Forwarding when Unanswered
occurs after this interval.
➣0406 - COS Options, Item 23: Call Forwarding (Both Ringing)
In an extension’s Class of Service, enable (1) or disable (0) an extension’s ability to set Call Forwarding
with Both Ringing.
➣0406 - COS Options, Item 31: Call Forwarding (When Busy)
In an extension’s Class of Service, enable...

Operation
(Current Systems)
To activate or cancel Call Forwarding:
1. Press idle CALL key (or lift handset) + Dial *2
OR
Press Call Forwarding key (PGM 1006 or SC 851: code 1080).
2. Dial Call Forwarding condition:
1 = Personal Answering Machine Emulation (then skip to step 4 - refer also to Voice Mail).
2 = Busy or not answered
4 = Immediate
6 = Not answered
7 = Immediate with simultaneous ringing (not for Voice Mail)
0 = Cancel
3. Dial destination extension, Voice Mail master number or press Voice Mail...

Operation (Cont’d)
3. Dial 1 plus extension to enable; dial 0 to disable.
DND flashes slowly.
Your Call Forwarding destination must be an installed extension. It cannot be a Department
Group pilot number. 
Once you activate Call Forwarding, only your Call Forwarding destination can place an Inter-
com call to you.
4. At keyset, press SPK to hang up.
OR
At single line set, hang up.
You’ll hear stutter dial tone when to place a new call.
(Older Systems)
To cancel Call Forwarding if you don’t know the mode...

Call Forwarding, Fixed
Description
 124i  Available. 384i Available— system software prior to
3.04 has different programming
options.
- Fixed Call Forwarding Off-Premise
requires Base 1.2N or higher or any
version of EXCPRU.- Fixed Call Forwarding Off-Premise
available in all versions.
- Fixed Call Forwarding Chaining
requires Base 4.02 and EXCPRU
4.02 or higher.- Fixed Call Forwarding Chaining
requires system software 3.07.12 or
higher.
Fixed Call Forwarding is a type of forwarding that is permanently...

Description(Cont’d)
Conditions
(384i Prior to 3.04 Only) Fixed Call Forwarding Immediate (Program 1027 Type 3) overrides Fixed Call For-
warding when Busy (Program 1029). Fixed Call Forwarding when Busy (Program 1029) overrides Fixed Call
Forwarding with Both Ringing (Program 1027 Type 1).
Default Setting
•Disabled.
Programming
Refer to the flowcharts on the next two pages.
➣0405 - System Timers (Part A), Item 1: Delayed Call Forwarding Time
Set the Delayed Call Forwarding interval. For an unanswered...

Programming (Cont’d)
Start
Which Fixed Call Forwarding
mode do you want:
- Both Ringing
- Unanswered
- Immediate
- Unanswered/Busy
- Off-premise?
In 1027, assign
the destination
port and enter 1. This option is not
intended for Voice Mail.In 1027, assign
the destination
port and enter 3.Both
RingingImme-
diate
In 1027, assign
the destination
port and enter 2.In 1027, assign
the destination
port and enter 4.See A
below.
Does Forwarding
When Unanswered
occur after the proper
delay interval?
In 0405:1,...