NEC Xen Ipk Features And Specifications Manual

Features and Specifications Manual V5 – 623
Doc. No. 8201 - Release 1.0
July 2003
Voice PromptV- 5
FEATURE 
DESCRIPTIONThe Voice Prompt feature provides voice guidance for assisting
station users. The voice prompt replaces the call waiting tone and/or
internal dial tone. 
SYSTEM 
AVAILABILITYTerminal Type
All terminals.
Required Components
VRS(4)-U(  ) ETU
OPERATING 
PROCEDURES
1. Go off-hook.
2. Listen to the Voice Prompt voice message such as:
Dial 9 to place a CO call.
Dial 0 for Attendant.
Dial 101...

July 2003 NEC Business Solutions Ltd
624 – V5Voice Prompt
Doc. No. 8201 - Release 1.0
July 2003
1. Go off-hook.
2. Dial the VRS voice message record/verify/erase Access Code.
3. Dial operation: 
ARecording
BConfirmation
CErasing
4. Dial operation: 
BVoice Prompt Message
5. Dial operation:
AMessage for Dial Tone
BMessage for Call Waiting Tone
6. Record message.
7. Go on-hook.
Note:During Message Recording, the LCD indicates the time remaining for
recording the message.
SERVICE 
CONDITIONSData Assignment...

Xen IPK Features and Specifications Manual
Features and Specifications Manual V5 – 625
Doc. No. 8201 - Release 1.0
July 2003
	If you try to record, confirm, or erase a message while it is being
played, you hear a busy tone.
	If all VRS(4)-U(  ) ETU channels that are recorded with Voice Prompt
messages are busy (playing messages other than Voice Prompts or in
record mode), then normal dial tone or a call waiting tone is heard.
	Previously recorded Voice Prompt messages are erased when a new
message is...

July 2003 NEC Business Solutions Ltd
626 – V5Voice Prompt
Doc. No. 8201 - Release 1.0
July 2003
THIS PAGE INTENTIONALLY LEFT BLANK 

Features and Specifications Manual Chapter 4 – 627
Doc. No. 8201 - Release 1.0
July 2003
Feature Access CodesChapter 4
SECTION 1
GENERAL 
I
NFORMATION
The table in this chapter shows the Access Codes used in the
system. Some codes are set as system defaults. Others have no default,
but are programmable.
Table notes include the following:
	Installation
	Access Codes operate on telephones specified during installation.
	All other notes are self explanatory
FunctionOperationNotes
Microphone ON/OFFT 

July 2003 NEC Business Solutions Ltd
628  – Chapter 4
Doc. No. 8201 - Release 1.0
July 2003
Serial Port VerificationT 

Xen IPK Features and Specifications Manual
Features and Specifications Manual Chapter 4 – 629
Doc. No. 8201 - Release 1.0
July 2003
Program System Speed Dial 
Buffer NumberT  

July 2003 NEC Business Solutions Ltd
630  – Chapter 4
Doc. No. 8201 - Release 1.0
July 2003
Program Feature Access Keys 
for Station Speed DialT 

Xen IPK Features and Specifications Manual
Features and Specifications Manual Chapter 4 – 631
Doc. No. 8201 - Release 1.0
July 2003
Program One-Touch Keys for 
Feature AccessT  

July 2003 NEC Business Solutions Ltd
632  – Chapter 4
Doc. No. 8201 - Release 1.0
July 2003
THIS PAGE INTENTIONALLY LEFT BLANK