NEC Xen Ipk Features And Specifications Manual

Xen IPK Features and Specifications Manual
Features and Specifications Manual A10 – 41
Doc. No. 8201 - Release 1.0
July 2003
¶+BTTCall Forward - Busy Immediately/Delay Selection 4-42
¶+BMCall Forward - No Answer Time Selection 1-2-22
4When the system is at default this Memory Block must be programmed for the feature to be used.
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line 
Key1-8-08
Station
Page-Line 
Key 

July 2003 NEC Business Solutions Ltd
42  – A10Assigned Night Answer (ANA)
Doc. No. 8201 - Release 1.0
July 2003
THIS PAGE INTENTIONALLY LEFT BLANK 

Features and Specifications Manual A11 – 43
Doc. No. 8201 - Release 1.0
July 2003
Attendant Add-On ConsoleA-11
FEATURE 
DESCRIPTIONThe Attendant Add-On Console functions in conjunction with a Multiline
Terminal programmed as an Attendant. This console provides access to a
maximum of 48 stations and/or outside lines. The Busy Lamp Field status is
shown as a red LED for each station or trunk. Trunks can include CO/PBX,
ISDN, DID and E&M Tie Lines. In addition, the Attendant Add-On Console
also has 12...

July 2003 NEC Business Solutions Ltd
44  – A11Attendant Add-On Console
Doc. No. 8201 - Release 1.0
July 2003
1. Lift the handset and receive internal dial tone.
2. Press the DSS/BLF key for the desired station. Hear ringback tone or
voice announce the station.
3. Called party answers.
1. Press the Message Wait or Station Lockout key.
2. Press the DSS/BLF key for the desired station.
1. Go off-hook with the handset or just press a CO line key on the
Attendant Add-On Console.
2. Dial the desired number....

Xen IPK Features and Specifications Manual
Features and Specifications Manual A11 – 45
Doc. No. 8201 - Release 1.0
July 2003
	Depending on System Programming (DSS Call Voice/Tone Signal
Selection), the called party rings or receives a voice announcement
when an Attendant makes a call using the Attendant Add-On Console.
	When the Attendant transfers a call, the transferred outside line
remains on Non-Exclusive Hold until the call is answered.
	Each installed Attendant Add-On Console reduces the maximum...

July 2003 NEC Business Solutions Ltd
46  – A11Attendant Add-On Console
Doc. No. 8201 - Release 1.0
July 2003
	Message Waiting/Station Outgoing Lockout status indications at the
Attendant Add-On Console are:
	The Attendant, with an Attendant Add-On Console, can set a message
to a Single Line Telephone if the Single Line Telephone is equipped
with a Message Waiting LED and connected to a SLI(8)-U(  ) ETU.
	When the Message Waiting indication is set, the Large LED flashes
green on Multiline Terminals and...

Xen IPK Features and Specifications Manual
Features and Specifications Manual A11 – 47
Doc. No. 8201 - Release 1.0
July 2003
GUIDE TO 
FEATURE 
PROGRAMMING
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line 
Key1-8-08
Station
Page-Line 
Key
¶+BS4Telephone Type Assignment7-2
¶+BTD4Attendant Add-On Console to Telephone Port 
Assignment1-6-01
¶+BTDAttendant Add-On Console Key Selection 1-6-05
¶+BTDDSS Call Voice/Tone Signal Selection 1-6-03
¶+BTSClass of Service (Attendant)...

July 2003 NEC Business Solutions Ltd
48  – A11Attendant Add-On Console
Doc. No. 8201 - Release 1.0
July 2003
THIS PAGE INTENTIONALLY LEFT BLANK 

Features and Specifications Manual A12 – 49
Doc. No. 8201 - Release 1.0
July 2003
Attendant Camp-OnA-12
FEATURE 
DESCRIPTIONThe Attendant Camp-On feature, used at an Attendant Position with an
Attendant Add-On Console, allows a call to be transferred to a busy station.
Press the Transfer key on the Attendant Add-On Console to send the
Camp-On tone to the busy station. A camped on call that is not answered in
a preprogrammed time recalls to the Attendant Position.
SYSTEM 
AVAILABILITYTerminal Type
Any...

July 2003 NEC Business Solutions Ltd
50  – A12Attendant Camp-On
Doc. No. 8201 - Release 1.0
July 2003
1. The user is engaged in a call.
2. Receive a camp-on tone.
3. Hang up or put the call on System Call Park.
4. Go off-hook, and talk with the CO/PBX incoming caller.
SERVICE 
CONDITIONSData Assignment
	This feature is allowed only if the system is programmed for Ring
Transfer.
	The Attendant Camp-On Recall Timer can be set for 30 seconds, 1,
1.5, 2, 3, 5, 8, or 10 minutes (default:1 minute).
	In Class...