NEC Xen Ipk Features And Specifications Manual

Xen IPK Features and Specifications Manual
Features and Specifications ManualA3 – 21
Doc. No. 8201 - Release 1.0
July 2003
Restrictions
	Existing restrictions and Least Cost Routing (LCR) assignments are
applied after Forced Account Codes are entered.
	Emergency 000 (111 NZ) calls cannot be made unless a valid Forced
Account Code is entered. In such cases, provide access to emergency
numbers by programming them into One-Touch or Feature Access
keys.
	Verified and Unverified Forced Account Codes cannot be...

July 2003 NEC Business Solutions Ltd
22  – A3Account Code - Forced/Verified
Doc. No. 8201 - Release 1.0
July 2003
	A is placed in front of the Forced Account Codes on the SMDR reports
to distinguish them from other Account Code entries. 
	Attendant Positions can be used to program Forced Account Codes
only if allow is assigned in Attendant Class of Service. 
	The maximum number of Forced Account Codes that can be entered
system-wide is 500.
	When the Interdigit time (default 10s) expires after the user...

Features and Specifications ManualA4 – 23
Doc. No. 8201 - Release 1.0
July 2003
Add-On ConferenceA-4
FEATURE 
DESCRIPTIONThe Add-On Conference feature allows a conference call with a maximum
of four parties with various combinations of outside lines and stations. This
increases efficiency by allowing multiple parties to enter into a conversation.
Up to sixteen 4-party conferences are allowed with no more than two
outside lines per conference.
SYSTEM 
AVAILABILITYTerminal Type
All stations.
Required...

July 2003 NEC Business Solutions Ltd
24  – A4Add-On Conference
Doc. No. 8201 - Release 1.0
July 2003
SERVICE 
CONDITIONSRestrictions
	A Single Line Telephone cannot be used to originate a 2-party CO
conference.
	A Multiline Terminal user that is put on hold cannot enter into another
conference.
General
	The elapsed time of the call (from the originating terminal) is shown on
all the Multiline Terminals with a display.
	When all sixteen conference circuits are in use, the Conference key
lights solid red...

Features and Specifications ManualA5 – 25
Doc. No. 8201 - Release 1.0
July 2003
All Call PageA-5
FEATURE 
DESCRIPTIONThe All Call Page feature allows simultaneous paging (internal and
external) of all idle Multiline Terminals in a zone over their built-in speakers
and over all external paging speakers. This enables a person, away from
their desk but within hearing distance of a Multiline Terminal or external
speaker, to respond to the paging call.
SYSTEM 
AVAILABILITYTerminal Type
All Terminals.
Required...

July 2003 NEC Business Solutions Ltd
26  – A5All Call Page
Doc. No. 8201 - Release 1.0
July 2003
1. Lift the handset, and receive internal dial tone or press the hookswitch
if the user is already engaged in a call.
2. Dial Access Code 
EI (set as default) for All Call Page.
3. Page.
1. Lift the handset or press the hookswitch if the user is already engaged
in a call.
2. Receive dial tone.
3. Dial Meet-Me Access Code 
EJ (set as default).
4. Talk with All Call Page originator.
QUICK ACCESS 
CODE...

Xen IPK Features and Specifications Manual
Features and Specifications ManualA5 – 27
Doc. No. 8201 - Release 1.0
July 2003
	Simultaneous zone paging (Internal Zones A, B, and C) can be
established at one time; however, All Internal Zone Paging and
Internal Emergency All Call Page cannot be performed if any other
internal page is in use.
General
	All Call Page can be originated or answered (by Meet-Me Answer)
from internal dial tone.
	All Call Page times out using the External Paging Time Out with a...

July 2003 NEC Business Solutions Ltd
28  – A5All Call Page
Doc. No. 8201 - Release 1.0
July 2003
¶+BPExternal Speaker Chime Start time Selection 1-7-09
¶+BPExternal Paging Timeout Selection 1-7-06
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line 
Key1-8-08
Station
Page-Line 
Key 

Features and Specifications ManualA6 – 29
Doc. No. 8201 - Release 1.0
July 2003
Alphanumeric DisplayA-6
FEATURE 
DESCRIPTIONEach Display Multiline Terminal is equipped with a 24-character by 3-line
Liquid Crystal Display (LCD). These displays provide information such as:
date/time, elapsed call time on outside calls, digits Dialled, internal calling
party number, Customised Message, and Speed Dial entries.
SYSTEM 
AVAILABILITYTerminal Type
All Multiline Terminals with a Display.
Required Components...

July 2003 NEC Business Solutions Ltd
30  – A6Alphanumeric Display
Doc. No. 8201 - Release 1.0
July 2003
FNC LAMP OFF Reset FNC LED
CURRENT PASSWORD ?
OriginatorTelephone Password (1)
NEW PASSWORD ?
OriginatorTelephone Password (2)
ENTER PASSWORD
OriginatorSet Password (CO/PBX Restriction)
RESTRICT SET
OriginatorAfter Setting Password
CALL DENIED
OriginatorDisplay on Station Outgoing Restricted Telephone
RESTRICT CANCLD
OriginatorAfter Cancelling Outgoing Call Restriction
CANCEL  TEL Cancel Restriction on...