NEC Xen Ipk Features And Specifications Manual

Features and Specifications Manual Chapter 1 - 1
Doc. No. 8201 - Release 1.0
July 2003
Regulatory InformationChapter 1
SECTION 1  
E
LECTROMAGNETIC 
I
NTERFERENCE (EMI)
WARNING
This is a Class A product. In a domestic environment this product may
cause radio interference in which case the user may be required to take
adequate measures.
SECTION 2 
I
NCIDENCE OF HARM
If the System is malfunctioning, it may also be causing harm to the
telephone network. The Telephone system should be disconnected until
the...

July 2003 NEC Business Solutions Ltd
2 - Chapter 1Regulatory Information
Doc. No. 8201 - Release 1.0
July 2003
SECTION 5 
C
OMPLIANCE 
I
NFORMATION
This equipment has been tested to comply with all relevant ACA Technical
Standards.
The D
term Series i telephones are compliant with all relevant ACA
Standards, but be aware that small metal objects such as staples and pins
may become caught and held in the earpiece, and users should be aware
and careful to prevent any accident from such an event.
The Xen...

Xen IPK Features and Specifications Manual
Features and Specifications Manual Chapter 1 - 3
Doc. No. 8201 - Release 1.0
July 2003
SECTION 9 
B
ATTERY DISPOSAL
The Xen IPK system includes the batteries listed below. When disposing of
these batteries, KSUs and/or ETUs, you must comply with applicable
Federal and State regulations regarding proper disposal procedures.
The Xen IPK CPUI( )-U( ) ETU provides memory backup for approximately
21 days. The Ni-Cd battery should be replaced about every two years....

July 2003 NEC Business Solutions Ltd
4 - Chapter 1Regulatory Information
Doc. No. 8201 - Release 1.0
July 2003
THIS PAGE INTENTIONALLY LEFT BLANK 

Features and Specifications Manual Chapter 2 – 5
Doc. No. 8201 - Release 1.0
July 2003
IntroductionChapter 2
SECTION 1
GENERAL 
I
NFORMATION
Dterm Series i (DTR telephones) and DTU-type multiline telephones can be
used with the Xen IPK system. 
SECTION 2
MULTILINE TERMINALS 
U
SED WITH THE 
S
YSTEM
Dterm Series i Multiline Terminals
The Dterm Series i Multiline Terminals offer a variety of colours, display and
non-display and line sizes.
	Two colours are generally available: black and white.
	Two display...

July 2003 NEC Business Solutions Ltd
6 – Chapter 2Introduction
Doc. No. 8201 - Release 1.0
July 2003
	The Single Line Terminals are offered in two variations (DTR-1-1A and
DTR-1HM-1A). Both have DTMF and Pulse Dialling compatibility, and
offer Flash and Redial key functionality. These Single Line Terminals
come standard with a Message Waiting Indicator that also functions as
an Incoming Call Indication. During a call, the receive audio level can
be increased three levels and decreased two levels from the...

Xen IPKFeatures and Specifications Manual
Features and Specifications Manual Chapter 2 – 7
Doc. No. 8201 - Release 1.0
July 2003
	One-Touch Keys
One-Touch keys can perform the same function as Feature Access keys.
A Multiline Terminal has a fixed number of these keys. No system
assignment is necessary, and the number of keys ranges from none to 16
depending on the terminal type. 
DTU-type Multiline Terminals
	The DTU-type multiline telephones are available in a variety of
colours, display and non-display...

July 2003 NEC Business Solutions Ltd
8 – Chapter 2Introduction
Doc. No. 8201 - Release 1.0
July 2003
THIS PAGE INTENTIONALLY LEFT BLANK 

Features and Specifications Manual Chapter 3 – 9
Doc. No. 8201 - Release 1.0
July 2003
FeaturesChapter 3
SECTION 1
GENERAL 
I
NFORMATION
All features available with the Xen IPK system are listed alphabetically by
name and described in this document. The following information is
provided, when applicable, for each feature:
Feature Description — briefly describes the feature and, when applicable,
tells how the feature is used by the end-user.
System Availability — describes Multiline Terminals that can be...

July 2003 NEC Business Solutions Ltd
10  – Chapter 3
Doc. No. 8201 - Release 1.0
July 2003
Service Conditions – provides specific conditions that apply to the
operation of this feature.
Related Features Lists – lists any associated features.
SECTION 2
OPERATING 
P
ROCEDURES
The operating procedures are the same for the Dterm Series i and DTU-Type
and ETW-Type Multiline Terminals. The Dterm Series i terminals have three
additional keys; MIC, Directory and Message. Minor differences in the keys
are listed...