NEC Xen Ipk Features And Specifications Manual

Features and Specifications ManualA1 – 11
Doc. No. 8201 - Release 1.0
July 2003
Account Code EntryA-1
FEATURE 
DESCRIPTIONThe Account Code Entry feature allows assignment of Account Codes up to
16 digits. Account Codes are incorporated in the call records generated by
the Station Message Detail Recording (SMDR) option and provide a
reference for billing.
SYSTEM 
AVAILABILITYTerminal Type
All terminals.
Required Components
MIFM-U(  ) ETU
OPERATING 
PROCEDURES
1. Press T.
2. Dial Access Code 
FF (fixed...

July 2003 NEC Business Solutions Ltd
12  – A1Account Code Entry
Doc. No. 8201 - Release 1.0
July 2003
1. Press the hookswitch, and receive a new internal dial tone; the outside
party is put on hold.
2. Dial Account Code Entry Access Code 
________ (not assigned at
default). 
3. Enter the Account Code using the dial pad.
4. Provide a hookflash to return to the held call.
QUICK ACCESS 
CODE 
REFERENCE
SERVICE 
CONDITIONS
Data Assignment
	The Account Code Entry Access Code, used after a call has been put
on...

Xen IPK Features and Specifications Manual
Features and Specifications ManualA1 – 13
Doc. No. 8201 - Release 1.0
July 2003
RELATED 
FEATURES LIST
GUIDE TO 
FEATURE 
PROGRAMMINGFeature 
NumberFeature Name
A-2 Account Code - Forced/Unverified
A-3 Account Code - Forced/Verified
S-15 Station Message Detail Recording (SMDR)
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line 
Key1-8-08
Station
Page-Line 
Key
¶+BTS4Class of Service (Station) Feature Selection 2 1-8-08 3-6...

July 2003 NEC Business Solutions Ltd
14  – A1Account Code Entry
Doc. No. 8201 - Release 1.0
July 2003
THIS PAGE INTENTIONALLY LEFT BLANK 

Features and Specifications ManualA2 – 15
Doc. No. 8201 - Release 1.0
July 2003
Account Code - 
Forced/Unverified
A-2
FEATURE 
DESCRIPTIONThe Forced/Unverified Account Code feature forces the user to dial an
access code and an Account Code before being able to select an outside
line, but the account code entered is not verified against a list of stored
numbers (as it is in the Forced/Verified Account Code feature). This in effect
means that any number (of a specified length) can be entered without being...

July 2003 NEC Business Solutions Ltd
16  – A2Account Code - Forced/Unverified
Doc. No. 8201 - Release 1.0
July 2003
SERVICE 
CONDITIONSData Assignment
	Use Memory Block 1-8-08 [Class of Service (Station) Feature
Selection 2], Page 6 LK3 to Allow (LED On) or Deny (default: LED Off)
Forced Account Code Unverified. 
	Use Memory Blocks 1-1-46~48 [Access Code (1-, 2-, or 3-Digit)
Assignment] to assign the Forced Account Code Access (Function
No. 147).
	Use Memory Block 1-8-27 (Forced Account Code Length...

Xen IPK Features and Specifications Manual
Features and Specifications ManualA2 – 17
Doc. No. 8201 - Release 1.0
July 2003
RELATED 
FEATURES LIST
GUIDE TO 
FEATURE 
PROGRAMMINGFeature 
NumberFeature Name
A-1 Account Code Entry
A-3 Account Code - Forced/Verified
S-15 Station Message Detail Recording (SMDR)
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line 
Key1-8-08
Station
Page-Line 
Key
¶+BA4Access Code (1-, 2-, or 3-Digit) Assignment1-1-46/47/48 146,147
¶+BTS Class of...

July 2003 NEC Business Solutions Ltd
18  – A2Account Code - Forced/Unverified
Doc. No. 8201 - Release 1.0
July 2003
¶+ ASSMDR Print Format 1-5-02
¶+ASSMDR Telephone Print Selection 4-56
¶+CSSCOM Port Baud Rate Setting Assignment 1-8-35
¶+BMStart Time Selection 1-1-05
4When the system is at default this Memory Block must be programmed for the feature to be used.
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line 
Key1-8-08
Station
Page-Line 
Key 

Features and Specifications ManualA3 – 19
Doc. No. 8201 - Release 1.0
July 2003
Account Code - 
Forced/Verified
A-3
FEATURE 
DESCRIPTIONThe Account Code - Forced/Verified feature forces selected station users to
dial an Access Code and a verified Account Code before making an
outgoing call. The outgoing call is processed only after the Dialled Account
Code is verified. This feature allows a system administrator to control
unauthorised outgoing calls. The Forced/Verified Account Code is part of
the...

July 2003 NEC Business Solutions Ltd
20  – A3Account Code - Forced/Verified
Doc. No. 8201 - Release 1.0
July 2003
1. Press the V (SYS. or STA softkey) to designate system or station
speed dialling.
2. Press the 
V (UP or DOWN softkey) to view the names/numbers
listed in the directory.
- OR -
Press a dial pad key (to select the first letter of the name or number of
the desired speed dial buffer) and dial 
J.
3. To dial the number press 
P or lift the handset.
4. Enter the Account Code.
SERVICE...