NEC Xen Alpha Features And Specifications Manual

Features & Specifications, Call Forward – Busy/No AnswerC-4, Page 45A6-506000-642-02
!Multiple one-touch keys can be assigned with different Call Forward destinations. When
a one-touch key is pressed to enable the feature, any previous call destination setting is
canceled. For example, if the user presses a one-touch key where extension 14 is the
Call Forward destination and extension 12 is the previous setting, then the setting for
extension 12 is canceled. The associated LED for the one-touch key used...

This page is intentionally blank.
Page 46, C-4Features & SpecificationsA6-506000-642-02 

Features & Specifications Manual, Call Forward – ExternalC-5, Page 47A6-506000-642-02
Xen AlphaRelease 1.0
C-5Call Forward – External
FEATURE
DESCRIPTION
The Call Forward External (CFE) feature allows all incoming DID, DIT, AA and CO Ring
Transferred calls to be automatically forwarded to an external destination. CFE is an extension
of existing Call Forward All and Busy/No Answer functions, where entry of a trunk access code
rather than an extension number triggers CFE setting.
STATION
APPLICATION
All...

Page 48, C-5Features & Specifications, Call Forward – ExternalA6-506000-642-02
SERVICE
CONDITIONS
!Call Forward External can be allowed/denied on a per station basis(P229).
!Call Forward External can be allowed/denied on a per trunk basis (P150).
!CFE will operate for DID, DIT and CO Ring Transferred calls. Incoming trunk calls not
received as a DID call must be changed to DIT before CFE will operate.
!Line Reversal must be enabled for all trunks being used for CFE (P112), including ISDN
trunks.
!Using...

Features & Specifications, Call Forward – ExternalC-5, Page 49A6-506000-642-02
!The line on which the incoming call arrives is released when the line used for the
outgoing call is released.
!Call Forward and Call Forward External can both be set at a station. When both are set,
DID, DIT and CO Ring Transferred calls will follow CFE, and ICM calls will follow the CF
Internal setting.
!When cancelling a Call Forward setting, dialling the code will first cancel a CFE setting.
If Call Forward is also set,...

This page is intentionally blank.
Page 50, C-5Features & SpecificationsA6-506000-642-02 

Features & Specifications Manual, Caller IdentificationC-6, Page 51A6-506000-642-02
Xen AlphaRelease 1.0
C-6Caller Identification
FEATURE
APPLICATION
The Caller Identification (Caller ID) feature allows the user to see the calling party’s name
and phone number in their telephone display.
A CID-B13 Unit is required to provide caller identification on analogue trunks. Three CID
units are required to provide caller identification for all six of these trunks.
Caller ID is available as standard on BRI ISDN...

This page is intentionally blank.
Page 52, C-6Features & SpecificationsA6-506000-642-02 

Features & Specifications Manual, Caller ID ScrollingC-7, Page 53A6-506000-642-02
Xen AlphaRelease 1.0
C-7Caller ID Scrolling
FEATURE
DESCRIPTION
When caller identification information is provided, the user can browse through the list of the
last 20 numbers by pressing 
P and R. The user can dial the displayed Caller ID number
by pressing  
N or by lifting the handset. 
S
TATION
APPLICATION
This feature is available for all Multiline telephones equipped with a display.
O
PERATION
PROCEDURE
1. While the...

This page is intentionally blank.
Page 54, C-7Features & SpecificationsA6-506000-642-02