NEC Xen Alpha Features And Specifications Manual

Features & Specifications, Conference Add-OnC-16, Page 75A6-506000-642-02
!During a conference call some of the keys on the telephone can be used and some
cannot be used, these are listed below.  
 
Available Keys:
OAccesses available functions.
O A  Toggles to turn the microphone on and off.
O B  Toggles to set and reset handset mute. 
M   Places a conference on hold.
NToggles to turn the speaker on and off or cancels a conference.
Unavailable Keys:
VOutside line key that is part of a conference....

This page is intentionally blank.
Page 76, C-16Features & SpecificationsA6-506000-642-02 

Features & Specifications Manual, Consecutive Speed DialC-17, Page 77A6-506000-642-02
Xen AlphaRelease 1.0
C-17Consecutive Speed Dial
FEATURE
DESCRIPTION
Consecutive Speed Dial enables users to simplify complicated dialling sequences by
allowing them to consecutively dial a combination of system speed dial or individual speed
dial numbers and/or manually dialled numbers. 
This feature is useful when verifying credit cards, accessing service providers, or any other
application that requires dialling a...

This page is intentionally blank.
Page 78, C-17Features & SpecificationsA6-506000-642-02 

Features & Specifications Manual, Delayed RingingD-1, Page 79A6-506000-642-02
Xen AlphaRelease 1.0
D-1Delayed Ringing
FEATURE
DESCRIPTION
Delayed Ringing allows some telephones to ring immediately for incoming calls and other
telephones to ring after a programmed delay.
S
TATION
APPLICATION
This feature is available for all Multiline telephones and single line telephones.
O
PERATION
PROCEDURE
 
R
ELATED
PROGRAMMING
All programming functions associated with this feature are listed in the following table....

This page is intentionally blank.
Page 80, D-1Features & SpecificationsA6-506000-642-02 

Features & Specifications Manual, Direct Inward TerminationD-2, Page 81A6-506000-642-02
Xen AlphaRelease 1.0
D-2Direct Inward Termination
FEATURE
DESCRIPTION
This feature allows external lines to be programmed to ring directly at telephones, bypassing
the attendant. A separate night ringing assignment is available. This feature is primarily
used for voice mail.
S
TATION
APPLICATION
This feature is available for all Multiline telephones and single line telephones.
O
PERATION
PROCEDURE
 
R
ELATED...

This page is intentionally blank.
Page 82, D-2Features & SpecificationsA6-506000-642-02 

Features & Specifications Manual, Direct Paging AccessD-3, Page 83A6-506000-642-02
Xen AlphaRelease 1.0
D-3Direct Paging Access
FEATURE
DESCRIPTION
This feature allows a user to assign a key on the telephone to directly access the
paging function.
S
TATION
APPLICATION
This feature is available for all Multiline telephones.
O
PERATION
PROCEDURE
 
1. Press  
O, T (DTB-type telephones) or  Q (DTU-type telephones).
2. Press  
V (one-touch key where direct paging access assigned).
3. Dial  
A G J, for...

Page 84, D-3Features & Specifications, Direct Paging AccessA6-506000-642-02
SERVICE
CONDITIONS
!Internal and/or external paging is accomplished by using the appropriate one-touch/
feature access key assigned as the paging key.
!The paging access codes include:
!The maximum number of digits that can be dialled for an internal line, assigned to a one-
touch/feature access key, is 16 digits.
!When multiple paging calls are made in system, the system processes internal pages
first and then processes the...