NEC Xen Alpha Features And Specifications Manual

Features & Specifications Manual, DP to DTMF SwitchingD-9, Page 95A6-506000-642-02
Xen AlphaRelease 1.0
D-9DP to DTMF Switching
FEATURE
DESCRIPTION
This feature allows a telephone to be switched from dial pulse (rotary) dialling to dual tone
multifrequency dialling (touchtone). DTMF dialling is required for operations such as data
transmission and communicating with a computer.
S
TATION
APPLICATION
This feature is available for all Multiline telephones. It is also available for single line
telephones...

This page is intentionally blank.
Page 96, D-9Features & SpecificationsA6-506000-642-02 

Features & Specifications Manual, Extension HuntingE-1, Page 97A6-506000-642-02
Xen AlphaRelease 1.0
E-1Extension Hunting
FEATURE
DESCRIPTION
This feature allows internal calls to be distributed to other telephones when the called
telephone is busy. Telephones can be grouped together into hunt groups. A primary hunt
number (hunt group pilot number) is assigned to a hunt group. When calls are received and
the called telephone is busy, the system automatically tries a second telephone, third
telephone and...

Page 98, E-1Features & Specifications, Extension HuntingA6-506000-642-02
SERVICE
CONDITIONS
!Each of the five hunt groups are assigned a hunt group pilot number (10, 20, 30, 40,
or 50). Telephones are grouped together and assigned to one of the hunt groups. The
extension numbers in each hunt group must be assigned consecutive extension
numbers. For example, extensions in hunt group 10 are assigned numbers 10 → 19.
!Hunt groups can be assigned independently of tenant groups.
!When a telephone in the hunt...

Features & Specifications Manual, Extension Name AssignmentE-2, Page 99A6-506000-642-02
Xen AlphaRelease 1.0
E-2Extension Name Assignment
FEATURE
DESCRIPTION
When this feature is used, the name or number of the internal caller or the paging originator
is displayed on the called party (parties) telephone(s). The telephones must be equipped
with an LCD for this feature to be used.
S
TATION
APPLICATION
This feature is available for all display Multiline telephones.
O
PERATION
PROCEDURE
 
1. Press  
O.
2....

This page is intentionally blank.
Page 100, E-2Features & SpecificationsA6-506000-642-02 

Features & Specifications Manual, External Paging (Meet-Me)E-3, Page 101A6-506000-642-02
Xen AlphaRelease 1.0
E-3External Paging (Meet-Me)
FEATURE
DESCRIPTION
This feature allows paging through a user-provided external speaker. The paged party
answers by dialling a specified access code.
S
TATION
APPLICATION
This feature is available for all Multiline telephones and single line telephones.
O
PERATION
PROCEDURE
 
1. Lift the handset.
2. Dial the access code for the desired zone or press a one-touch key...

Page 102, E-3Features & Specifications, External Paging (Meet-Me)A6-506000-642-02
SERVICE
CONDITIONS
!When external paging is originated, a tone burst is heard from the external speaker and
from the telephone originating the page.
!A busy tone is also generated when a user attempts a page and external paging is
in use. 
!If background music is on or if an outside call is ringing in to the telephone, ringing or
background music is suspended during a paging announcement. Ringing or background
music is...

Features & Specifications Manual, External RingerE-4, Page 103A6-506000-642-02
Xen AlphaRelease 1.0
E-4External Ringer 
FEATURE
DESCRIPTION
A user-provided external speaker or tone ringer can be programmed to ring when incoming
calls are received. Ringing can be individually set for day mode and night mode.
O
PERATION
PROCEDURE
 
1. Lift the handset or press  
N.
2. Press the appropriate flashing line key.
3. Answer the call.
R
ELATED
PROGRAMMING
All programming functions associated with this feature are...

This page is intentionally blank.
Page 104, E-4Features & SpecificationsA6-506000-642-02