NEC Xen Alpha Features And Specifications Manual

Features & Specifications, Flash KeyF-1, Page 105A6-506000-642-02
Xen AlphaRelease 1.0
F-1Flash Key
FEATURE
DESCRIPTION
If a system is connected to a PBX, it can be programmed to transfer the PBX call to the
system using a flash signal. The duration of the flash signal is assigned in system
programming.
S
TATION
APPLICATION
This feature is available for all Multiline telephones.
O
PERATION
PROCEDURE
 
1. Press  
Q (DTB-type telephones) orS (DTU-type telephones).
2. Hang up, the call is transferred.
R...

This page is intentionally blank.
Page 106, F-1Features & SpecificationsA6-506000-642-02 

Features & Specifications, Flexible Line KeyF-2, Page 107A6-506000-642-02
Xen AlphaRelease 1.0
F-2Flexible Line Key
FEATURE
DESCRIPTION
The line keys on the Multiline telephones are designed for flexibility of use. Line keys that
are not used to access external lines can be assigned for:

speed dialling
one-touch/feature access key operation for seizing internal of external telephone lines
dialling access codes that are used to set/cancel features such as microphone on/off and
headset on/off
STATION...

This page is intentionally blank.
Page 108, F-2Features & SpecificationsA6-506000-642-02 

Features & Specifications, Flexible Numbering PlanF-3, Page 109A6-506000-642-02
Xen AlphaRelease 1.0
F-3Flexible Numbering Plan
FEATURE
DESCRIPTION
This feature allows extension numbers to be changed to meet individual customer’s needs.
When the system is first turned on, the system automatically assigns default extension
numbers. As necessary, these settings can be changed in system programming.
S
TATION
APPLICAITON
This feature is available for all Multiline telephones and Single Line telephones.
O...

This page is intentionally blank.
Page 110, F-3Features & SpecificationsA6-506000-642-02 

Features & Specifications, Flexible Ringing AssignmentF-4, Page 111A6-506000-642-02
Xen AlphaRelease 1.0
F-4Flexible Ringing Assignment
FEATURE
DESCRIPTION
External calls can be programmed to ring at specified telephones or to an external speaker
or tone ringer. Separate day and night ringing assignments can also be specified in
programming.
S
ATION
APPLICATION
This feature is available for all Multiline telephones and Single Line telephones.
O
PERATION
PROCEDURE
 
R
ELATED
PROGRAMMING
All programming...

This page is intentionally blank.
Page 112, F-4Features & SpecificationsA6-506000-642-02 

Features & Specifications, Flexible TimeoutF-5, Page 113A6-506000-642-02
Xen AlphaRelease 1.0
F-5Flexible Timeout
FEATURE
DESCRIPTION
Flexible Timeouts are the system defaults for a variety of times selections. These preset
values allow the system to operate without any initial program changes. Many of these
values can be changed in system programming to meet individual user specifications.
O
PERATION
PROCEDURE
 
The flexible timeout table provides a list of the timers that can be programmed in the...

Page 114, F-5Features & Specifications, Flexible TimeoutA6-506000-642-02
CO/PBX DTMF 
Duration/Interdigit 
Time Assignment
110 – Touchtone 
Signal Duration and 
Pause IntervalSpecifies the tone duration and 
interdigit time when DTMF signaling 
is used.0 = Duration 100ms / Pause 70ms (D)
1 = Duration 400ms / Pause 100ms
Disconnect Time 
Selection
FixedThe minimum time that must elapse 
before a disconnected line can be 
accessed again.1 sec
Doorphone Display 
Time Selection
501 – Doorphone 
Call...