NEC Xen Alpha Features And Specifications Manual

Features & Specifications Manual, Direct Station SelectionD-4, Page 85A6-506000-642-02
Xen AlphaRelease 1.0
D-4Direct Station Selection
FEATURE
DESCRIPTION
The Direct Station Selection (DSS) feature allows users to assign internal telephone
numbers to one-touch/feature access keys allowing them to make calls by pressing one key.
S
TATION
APPLICATION
This feature is available for all Multiline telephones.
O
PERATION
PROCEDURE
 
1. Press  
O while the telephone is in the idle condition.
2. Press  
T...

Page 86, D-4Features & Specifications, Direct Station SelectionA6-506000-642-02
RELATED
PROGRAMMING
All programming functions associated with this feature are listed in the following table. Some
functions must be programmed before the feature is operational and other functions are
optional. The optional functions can affect how the feature operates. 
S
ERVICE
CONDITIONS
!If a called telephone is busy, a call waiting tone is returned to the telephone that
originated the call.
!A one-touch key that is...

Features & Specifications Manual, Distinctive RingingD-5, Page 87A6-506000-642-02
Xen AlphaRelease 1.0
D-5Distinctive Ringing
FEATURE
DESCRIPTION
This feature allows users to assign different ringing patterns to internal and external calls to
easily identify the type of call they are receiving.
S
TATION
APPLICATION
This feature is available for all Multiline telephones.
O
PERATION
PROCEDURE
 
R
ELATED
PROGRAMMING
All programming functions associated with this feature are listed in the following table....

Page 88, D-5Features & Specifications, Distinctive RingingA6-506000-642-02
!A choice of four different ringing patterns are available.
!A choice of two ringing tones are available..
Low Tone = 520/660Hz
High Tone = 1100/1400Hz
0s 1s 2s 3s 4s 5s 6s
A
B
C
D 

Features & Specifications Manual, Door Lock ReleaseD-6, Page 89A6-506000-642-02
Xen AlphaRelease 1.0
D-6Door Lock Release
FEATURE
DESCRIPTION
While the Multiline telephone user is talking with the doorphone user, the telephone user can
unlock the door by entering a code assigned for door lock release. 
!For this feature to be available, the DPH-B13 ETU must be installed in the system. 
S
TATION
APPLICATION
This feature is available for all Multiline telephones.
O
PERATION
PROCEDURE
 
1. Press  
O.
2....

This page is intentionally blank.
Page 90, D-6Features & SpecificationsA6-506000-642-02 

Features & Specifications Manual, Door/Monitor TelephoneD-7, Page 91A6-506000-642-02
Xen AlphaRelease 1.0
D-7Door/Monitor Telephone
FEATURE
DESCRIPTION
Two doorphones can be installed in the system to provide 2-way communication with a
location such as a front door area or to monitor a room. The DPH-B13 ETU must be installed
in the key system to provide for this feature. When the doorphone unit is used as a
doorphone, Multiline telephones are assigned to ring when the doorphone key is pressed.
When the...

Page 92, D-7Features & Specifications, Door/Monitor TelephoneA6-506000-642-02
RELATED
PROGRAMMING
All programming functions associated with this feature are listed in the following table. Some
functions must be programmed before the feature is operational and other functions are
optional. The optional functions can affect how the feature operates. 
S
ERVICE
CONDITIONS
!This feature requires the installation of the DPH-B13 ETU.
!A maximum of two doorphones can be installed in the system.
!Only one...

Features & Specifications Manual, Do Not Disturb (DND)D-8, Page 93A6-506000-642-02
Xen AlphaRelease 1.0
D-8Do Not Disturb (DND)
FEATURE
DESCRIPTION
This feature is used to temporarily eliminate all audible incoming call signals to the user’s
telephone. Visual indications to the telephone display and LEDs continue.
S
TATION
APPLICAITON
This feature is available for all Multiline telephones.
O
PERATION
PROCEDURE
 
1. While the telephone is idle, press  
O.
2. Dial  
F E (access code).
3. Press  
O.
1....

This page is intentionally blank.
Page 94, D-8Features & SpecificationsA6-506000-642-02