NEC Xen Alpha Features And Specifications Manual

Features & Specifications Manual, Automatic Day/Night Mode SwitchingA-7, Page 15A6-506000-642-02
Xen AlphaRelease 1.0
A-7Automatic Day/Night Mode 
Switching
FEATURE
DESCRIPTION
This feature allows the user to program the system to automatically switch from day to night
mode at a preset time.
!Refer to Night Mode, Page 165 for a description of manual day/night mode switching.
O
PERATION
PROCEDURE
 
R
ELATED
PROGRAMMING
All programming functions associated with this feature are listed in the following...

This page is intentionally blank.
Page 16, A-7Features & SpecificationsA6-506000-642-02 

Features & Specifications Manual, Automatic HoldA-8, Page 17A6-506000-642-02
Xen AlphaRelease 1.0
A-8Automatic Hold
FEATURE
DESCRIPTION
This feature allows a user to press a DSS key (Direct Station Selection) to page an internal
caller while an external call is in progress. Once the DSS key is pressed, the external caller
is automatically placed on non-exclusive hold. 
S
TATION
APPLICATION
This feature is available for all Multiline telephones. 
O
PERATION
PROCEDURE
 
1. While engaged on an external...

This page is intentionally blank.
Page 18, A-8Features & SpecificationsA6-506000-642-02 

Features & Specifications Manual, Automatic Pause – Behind PBXA-9, Page 19A6-506000-642-02
Xen AlphaRelease 1.0
A-9Automatic Pause – Behind PBX
FEATURE
DESCRIPTION
When a user places an external call using speed dial, redial, or saved dial through a PBX
line, the system automatically inserts a pause into the dialled number.
O
PERATION
PROCEDURE
 
R
ELATED
PROGRAMMING
All programming functions associated with this feature are listed in the following table. Some
functions must be programmed before the...

This page is intentionally blank.
Page 20, A-9Features & SpecificationsA6-506000-642-02 

Features & Specifications Manual, Automatic RedialA-10, Page 21A6-506000-642-02
Xen AlphaRelease 1.0
A-10Automatic Redial
FEATURE
DESCRIPTION
Automatic Redial simplifies repeated dialling to a busy telephone or when there is no
answer. When set, redialling is automatically repeated at preassigned intervals. The
intervals are assigned in system programming.
S
TATION
APPLICATION
This feature is available for all Multiline telephones.
O
PERATION
PROCEDURE
 
1. After receiving a busy tone or when there is no...

Page 22, A-10Feature & Specifications, Automatic RedialA6-506000-642-02
SERVICE
CONDITIONS
!If an external call is made using a PBX line, the call elapsed timer displays but does not
have any affect on the Automatic Redial condition.
!When using an ISDN external line, a busy tone is not detected and the line is placed into
wait mode until release notification is received. Automatic Redial continues until the
programmed number of retries is exceeded. 
!If the user cancels Automatic Redial during wait...

Features & Specifications Manual, Automatic ReleaseA-11, Page 23A6-506000-642-02
Xen AlphaRelease 1.0
A-11Automatic Release
FEATURE
DESCRIPTION
This feature signals the system to release the line when an external caller abandons the call.
S
TATION
APPLICATION
This feature is available for all Multiline telephones and single line telephones.
O
PERATION
PROCEDURE
 
R
ELATED
PROGRAMMING
All programming functions associated with this feature are listed in the following table. Some
functions must be...

This page is intentionally blank.
Page 24, A-11Features & SpecificationsA6-506000-642-02