NEC Xen Alpha Features And Specifications Manual

Features & Specifications Manual, Ancillary Device ConnectionA-2, Page 5A6-506000-642-02
Xen AlphaRelease 1.0
A-2Ancillary Device Connection
FEATURE
DESCRIPTION
This feature allows ancillary (peripheral) devices such as tape recorders, headsets, single
line telephones, to be connected to the system. 
S
TATION
APPLICATION
The feature is only available when using the DTU-Type Multiline telephones.
O
PERATION
PROCEDURE
 
S
ERVICE
CONDITIONS
!When using ancillary equipment, the following units can be...

This page is intentionally blank.
Page 6, A-2Features & SpecificationsA6-506000-642-02 

Features & Specifications Manual, Answer HoldA-3, Page 7A6-506000-642-02
Xen AlphaRelease 1.0
A-3Answer Hold
FEATURE
DESCRIPTION
Answer Hold allows the Multiline telephone user to answer an external call by pressing the
answer key (
R). If the user is on a call, that call is placed on hold when the new call
is answered.
S
TATION
APPLICATION
This feature is available for all Multiline telephones.
O
PERATION
PROCEDURE
1. Press R to answer the call. If already engaged on a call, the existing call is placed...

This page is intentionally blank.
Page 8, A-3Features & SpecificationsA6-506000-642-02 

Features & Specifications Manual, Answer KeyA-4, Page 9A6-506000-642-02
Xen AlphaRelease 1.0
A-4Answer Key
FEATURE
DESCRIPTION
Users answer trunk calls by simply pressing one key; the Answer Key (R).
S
TATION
APPLICATION
This feature is available for all Multiline telephones.
O
PERATION
PROCEDURE
1. Press  Rand  N or lift the handset.
R
ELATED
PROGRAMMING
All programming functions associated with this feature are listed in the following table. Some
functions must be programmed before the feature is...

This page is intentionally blank.
Page 10, A-4Features & SpecificationsA6-506000-642-02 

Features & Specifications Manual, Attendant PositionsA-5, Page 11A6-506000-642-02
Xen AlphaRelease 1.0
A-5Attendant Positions
FEATUR
DESCRIPTION
This feature allows the first two Multiline telephones to be assigned as Attendant Positions.
These telephones can be used as “programming telephones” and can perform certain
attendant feature operations.
S
TATION
APPLICATION
This feature is available for the DTU-Type and Xen System Multiline telephones. 
O
PERATION
PROCEDURE
 
 

Automatic Callback, Page 13...

This page is intentionally blank.
Page 12, A-5Features & SpecificationsA6-506000-642-02 

Features & Specifications Manual, Automatic CallbackA-6, Page 13A6-506000-642-02
Xen AlphaRelease 1.0
A-6Automatic Callback
FEATURE
DESCRIPTION
When calling a busy telephone and hearing a busy tone, users can set an Automatic
Callback. When both telephones are idle, the system signals the person who originated the
callback. When the callback originator answers, the system then signals the other telephone
user of the call.
S
TATION
APPLICATION
This feature is available for all telephones and Single Line...

This page is intentionally blank.
Page 14, A-6Features & SpecificationsA6-506000-642-02