NEC Visualink 128/384 Engineering Guide
Have a look at the manual NEC Visualink 128/384 Engineering Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
NDA-24233 Issue 2Page 3-45 VisuaLink 128/384 Engineering Guide Console Command List 3.15 Maintenance and Other Command ISPR Setting Parameter Initialization 15-1 CRAM Clearing Backup Memory 15-2 RRST System Reset Request 15-3 Description: Initializes all VisuaLink values to factory default. Command Format: ISPR Response: Normal Response OK Error Response: ERR01 Description: Initializes registered data. Command Format: CRAM p1 p1: T : abbreviated speed dial registration S : camera preset registration Note: If not specified, both registered contents are initialized. Response: Normal Response OK Error Response: ERR01 Description: Resets the VisuaLink. Command Format: RRST Response: Normal Response OK Error Response: ERR01
Page 3-46NDA-24233 Issue 2 Console Command List VisuaLink 128/384 Engineering Guide WCLK Setting System Clock 15-4 RCLK Checking System Clock Setting 15-5 Description: Sets the VisuaLink built-in system clock, date and time. Command Format: WCLK p1-p2-p3 p4:p5:p6 (p7) p1: yyyy : year p2: 01-12 : month p3: 01-31 : date p4: 01-24 : hour p5: 00-59 : minute p6: 00-59 : second p7: xxx : day of the week (MON/ TUE/ WED/ THU/ FRI/ SAT/ SUN) Response: Normal Response OK Error Response: ERR01 Description: Reads the VisuaLink built-in system clock, date and time. Command Format: RCLK Response: Normal Response p1-p2-p3 p4:p5:p6 (p7) OK p1: yyyy : year p2: 01-12 : month p3: 01-31 : date p4: 01-24 : hour p5: 00-59 : minute p6: 00-59 : second p7: xxx : day of the week (MON/ TUE/ WED/ THU/ FRI/ SAT/ SUN) Error Response: ERR01
NDA-24233 Issue 2Page 3-47 VisuaLink 128/384 Engineering Guide Console Command List 3.16 Mutli-point Conference Status Command RMNA Read Multi-point Conference Participating Location Name 16-1 Description: Acquires location name of all location participating locations in multi- point conference. Command Format: RMNA p1 p1: 1-255 : conference room number (can be specified in multiple) Response: Normal Response p1 p2 p3 OK p1: 1-999 : conference room number p2: xxxxxxxx : location name in alphabet p3: XXXXXXXX : location name in Japanese character Error Response: ERR01 ERR24
Page 3-48NDA-24233 Issue 2 Console Command List VisuaLink 128/384 Engineering Guide RMST Read Multi-point Conference Operation Status (NEC Specific) 16-2 Description: Acquires a status of a multi-point conference status when in activated for NEC specific multi-point conference. Command Format: RMST p1 p2 p3 p4 p5 p6 ............ p18 p1: 1-14 : local site conference number p2: 0000-FFFF : conference participating status 1: participate 0: not participate p3: 0000-FFFF : terminal connection status 1: connect 0: not connected p4: 0000-FFFF : audio switch status 1: switch 0: not switch p5: 0000 : fixed p6 0000 : fixed p7: 1-14 : operator conference room number 00: no operator p8: 1-14 : conference room number of the originator of multiple address transmission p9: 1-14 : conference room number of a location receiving multiple address transmission. p10: 1-14 : conference room number of the originator of a transmission at a specify video reception. It is not a specific video reception if it is 00. p11: 0 : fixed p12: 0 : fixed p13: 0 : fixed p14: 0 : fixed p15: 0 : fixed p16: 0 : fixed p17: 1111 : fixed p18: 0-1 : local office in transmission 0: not transmitting 1: transmitting Note 1: When p1 = 0, a local site withdraw from a multi-point conference. Note 2: Bit assignment of 0000-FFFF is as follows: XX 14131211109876543 21 Master Only Slave Master
NDA-24233 Issue 2Page 3-49 VisuaLink 128/384 Engineering Guide Console Command List RMPS Read Multi-point Conference Operation Status 16-3 RMMD Read Multi-point Conference Mode Status 16-4 Description: Acquires the multi-point conference status. Command Format: RMPS Response: Normal Response p1 p2 p3 p4 p5 p6 OK p1: 1-255 : local site conference room number p2: 0/1 : status of acquisition of a right to operate in a local site 1: acquired 0: released p3: 1-255 : location number of a video being received p4: 0/1 : local site video transmitting status 0: OFF 1: ON p5: 1-255 : a number of multi-point conference participants p6: 0/1 : screen composite capability 0: none 1: yes Error Response: ERR01 Description: Acquires the multi-point conference mode status. Command Format: RMMD Response: Normal Response p1 OK p1: 1 : audio switch 2 : local site video transmission 3 : chairman control 4 : selective receive 5 : a status of multiple address transmission by operator Error Response:ERR01
Page 3-50NDA-24233 Issue 2 Console Command List VisuaLink 128/384 Engineering Guide 3.17 Model Identification Command RMES Read Model Identification 17-1 Description: Read model identification Command Format: RMES Response: Normal Response p1 p2 OK p1: TC2000_EC : VL128 TC2000_6B : VL384 p2: F/W version: ex. V01.01.01 Error Response:ERR01
NDA-24233 Issue 2Page 3-51 VisuaLink 128/384 Engineering Guide Console Command List 3.18 Audio Training Command ECTS Audio Training Command 18-1 Description: Initiate audio training. White noise is generated while 7 seconds. Command Format: ECTS Response: Normal Response OK Error Response:ERR01
Page 3-52NDA-24233 Issue 2 Console Command List VisuaLink 128/384 Engineering Guide 3.19 ISDN Control Command NCRN Requesting Connection 19-1 Description: Placing a BRI ISDN call. A call can be requested by either directly specifying a remote number or using an speed dial number. If using an speed dial number, it must be registered in advance with MDST command. Command Format: NCRN p1 p2 p3 p1: #xx : speed dial call (xx : speed dial number) 0-9 : dial number (within 20-digit) Sub address (within 8-digit) * : address/ sub address ** : ch1/ ch2 separating code R : redial p2: B : 64 kbps 2B : 2x64 kbps 3B : 192 kbps 4B : 256 kbps 5B : 320 kbps 6B : 384 kbps TEL : telephone p3: 64 : P x 64 k network 56 : P x 56 k network Note 1: With p1: speed dial, p2 and p3 are omitted. Note 2: When p3: is omitted, “64” is set. Note 3: When p3 = TEL, p4 is omitted. Response: Normal Response OK Error Response: ERR01 ERR05 ERR33 ERR34 ERR35 ERR41 ERR43 ERR44 ERR45 ERR47 ERR48 ERR86 ERR87 Note: If VL128, setting 3B - 6B in p1 results in error.
NDA-24233 Issue 2Page 3-53 VisuaLink 128/384 Engineering Guide Console Command List NDSC Requesting Disconnection 19-2 NCIC Incoming Call Permit/Reject 19-3 Description: A disconnect in an BRI ISDN call. This command is used to execute a disconnection request and ending communication. Command Format: NDSC Response: Normal Response: OK Error Response: ERR01 ERR41 ERR46 ERR48 ERR87 Description: Permits or rejects incoming call on the BRI ISDN live. When a manual incoming call mode is selected with a SINC command, NCIC command permits or rejects an incoming call for NINC indication. Command Format: NCIC p1 p1: YES : permit NO : reject Response: Normal Response: OK Error Response: ERR01 ERR05 ERR41 ERR42 ERR87
Page 3-54NDA-24233 Issue 2 Console Command List VisuaLink 128/384 Engineering Guide NSTQ Communication Status Inquiry 19-4 Description: Gives a status on the ISDN communication. Command Format: NSTQ Response: Normal Response p1 p2 p3 p4 p5 p6 p7 OK p1: B : communication speed B 2B : communication speed 2B 3B : communication speed 3B 4B : communication speed 4B 5B : communication speed 5B 6B : communication speed 6B TEL : communication speed TEL p2: xx : ch1 communication status (see below) p3: xx : ch2 communication status (see below) p4: xx : ch3 communication status (see below) p5: xx : ch4 communication status (see below) p6: xx : ch5 communication status (see below) p7: xx : ch6 communication status (see below) Communication Status xx = 01: no communications 02: dialing 03: waiting to connect 04: calling 05: checking a response 06: communicating 07: disconnecting Error Response: ERR01 ERR05 ERR41 ERR87 Note: If VL128, p4 ~ p7 are not reported.