NEC Visualink 128/384 Engineering Guide

							NDA-24233 Issue 2Page 2-1
VisuaLink 128/384 Engineering Guide Chapter 2
Chapter 2: Console Command List
Table 1:  VIDEO Command
Table 2:  AUDIO Command
Table 3:  LINE Setting Command
NO Feature Command Name Process
1-1 Setting Video Format SVFM Setting
1-2 Checking Video Format Setting RVFM Status
1-3 Setting Picture-in-Picture SPIP Setting
1-4 Checking Picture-in-Picture Setting RPIP Status
1-5 Setting Video Input Switch SNDS Setting
1-6 Checking Video Input Setting RSND Status
1-7 Setting Monitor Output Video SDSP Setting
1-8 Checking Monitor Output Video Setting RDSP Status
1-9 Setting/Checking PIP Display Format SPDP Setting/Status
1-10 Setting/Checking PIP During Snapshot SPSW Setting/Status
1-11 Setting/Checking Video Priority SCPI Setting/Status
1-12 Setting H.263 S263 Setting
1-13 Checking H263 Setting R263 Setting
NO Feature Command Name Process
2-1 Setting Audio Mode SAMD Setting
2-2 Checking Audio Mode Setting RAMD Status
2-3 Setting Audio Delay SADL Setting
2-4 Checking Audio Delay Setting RADL Status
2-5 Setting MIC On/Off SMIC Setting
2-6 Checking MIC On/Off Setting RMIC Status
2-7 Setting Volume SVOL Setting
2-8 Checking Volume Setting RVOL Status
2-9 Setting Audio Input/Output Port SASW Setting
2-10 Checking Audio Input/Output Port Setting RASW Status
2-11Setting Audio Mute Operation at start of 
CommunicationsSMMT Setting
2-12Reads the current Mute mode setting at start of 
CommunicationsRMMT Status
2-13Sets the Audio and Audio/Video Mute mode at start 
of CommunicationsSMTC Setting
2-14Reads the current Mute control at start of 
CommunicationsRMTC Status
NO Feature Command Name Process
3-1 Setting Network Type (P x 64/56) SNET Setting
3-2 Checking Network Type Setting (P x 64/56) RNET Status
3-3 Setting Transmission Line Type NNSS Setting
3-4 Checking Transmission Line Type Setting NNSI Status
3-5 Setting Transmission Line Speed SLSP Setting
3-6 Checking Transmission Line Speed Setting RLSP Status 
						

							Page 2-2NDA-24233 Issue 2
Chapter 2 VisuaLink 128/384 Engineering Guide
Table 4:  DATA Command
Table 5:  ISDN Registering/Setting Command
Table 6:  Camera related Registering/Setting Command
Table 7:  Communication Status Reading Command
Table 8:  Alarm related Command
Table 9:  History Reading Command
NO Feature Command Name Process
4-1 Setting LSD Speed SAM2 Setting
4-2 Checking LSD Speed Setting RAM2 Status
4-3 Setting MLP Speed SDM3 Setting
4-4 Checking MLP Speed Setting RDM3 Status
NO Feature Command Name Process
5-1 Registering My Number NDSS Setting
5-2 Checking My Number Registration NDSR Status
5-3 Registering Speed Dial MDST Setting
5-4 Checking Speed Dial Registration MDRD Status
5-6 Setting Incoming Call Buzzer NBZS Setting
5-7 Checking Incoming Call Buzzer Setting NBZI Status
5-8 Setting Incoming Call Mode SINC Setting/Status
5-9Setting/Checking Incoming Call Buzzer at Auto 
Answer ModeSRNG Setting/Status
5-10 Registering SPID SPID Setting
5-11 Checking SPID RPID Status
NO Feature Command Name Process
6-1 Registering Camera Preset Position CPPS Setting
6-2 Registering Talker Name CPNS Setting
6-3 Setting Camera Model SCMK Setting
6-4 Checking Camera Model Setting RCMK Status
NO Feature Command Name Process
7-1 Read Manufacturer Code RMAC Status
7-2 Read Common Mode During Communication RMOD Status
7-3 Read H.221 Synchronous Status R221 Status
7-4 Read Remote Site Name (at Point-to-Point) RPNA Status
7-5 Read Participating Conference Status RCST Status
NO Feature Command Name Process
8-1 Read Alarm Status CALM Status
NO Feature Command Name Process
9-1 Read Communication/Alarm History RLAM Status 
						

							NDA-24233 Issue 2Page 2-3
VisuaLink 128/384 Engineering Guide Chapter 2
Table 10:  Registering Local Location Name Command
Table 11:  Serial Port Control Command
Table 12:  Acquiring Version Command
Table 13:  Maintenance Command
Table 14:  Report Response Control Command
Table 15:  Maintenance and Other Command
Table 16:  Maintenance and Other Command
NO Feature Command Name Process
10-1 Registering Local Site Name MRNS Setting
NO Feature Command Name Process
11-1 Setting Serial Port SSIO Setting
11-2 Checking Serial Port Setting RSIO Status
NO Feature Command Name Process
12-1 Requesting Software Version RVER Operation
NO Feature Command Name Process
13-1 Setting Local Loopback SLLB Operation
13-2 Checking Local Loopback Setting RLLB Status
NO Feature Command Name Process
14-1 Conference Status Repor t Control ITCS Operation
14-2 Multi-point Conference Status Report Control IMCU Operation
14-3 H.243 Repor t Control I243 Operation
14-4 Command Generator Related Report Control ICGP Operation
NO Feature Command Name Process
15-1 Setting Parameter Initialization ISPR Operation
15-2 Clearing Backup Memory CRAM Operation
15-3 System Reset Request RRST Operation
15-4 Setting System Clock WCLK Setting
15-5 Checking System Clock Setting RCLK Status
NO Feature Command Name Process
16-1Read Multi-point Conference Par ticipating Location 
NameRMNA Status
16-2Read Multi-point Conference Operation Status (NEC 
Specific)RMST Status
16-3 Read Multi-point Conference Operation Status RMPS Status
16-4 Read Multi-point Conference Mode Status RMMD Status 
						

							Page 2-4NDA-24233 Issue 2
Chapter 2 VisuaLink 128/384 Engineering Guide
Table 17:  Model Identification Command
Table 18:  Audio Training Command
Table 19:  ISDN Control Command
Table 20:  Camera Control Command
Table 21:  Option Control Command
Table 22:  Multi-point Conference Control 
Table 23:  Opening Message Command
NO Feature Command Name Process
17-1 Read Model Identification RMES Status
NO Feature Command Name Process
18-1 Initiate Audio Training ECTS Operation
NO Feature Command Name Process
19-1 Requesting Connection NCRN Operation
19-2 Request Disconnection NDSC Operation
19-3 Incoming Call Permit/Reject NCIC Operation
19-4 Communication Status Inquiry NSTQ Operation
NO Feature Command Name Process
20-1 Request for Camera Direction Change CAMS Operation
NO Feature Command Name Process
21-1 Pointer Control POCS Operation
21-2 Talker Detection Control VCTS Operation
21-3 SnapShot Transmission Request STPR Operation
21-4 Standard Display Screen Setting Request SXMR Operation
21-5 Request to Acquire Composite Screen Setting SXST Operation
NO Feature Command Name Process
22-1 Request to Chairman Control COPR Operation
22-2 Multiple Address Transmission Request CSPR Operation
22-3 Specific Picture Reception Request CRPR Operation
22-4Request to Switch Multiple Address Originator 
MonitorCMPR Operation
NO Feature Command Name Process
23-1 Opening Message at Unit Activation OMES Report 
						

							NDA-24233 Issue 2Page 2-5
VisuaLink 128/384 Engineering Guide Chapter 2
Table 24:  Communication Status Report Command
Table 25:  Alarm Status Report Command
Table 26:  Video Status Report Command
Table 27:  Participating Status Report Command
Table 28:  ISDN - Report Command
Table 29:  Camera Control Report Command
Table 30:  Option Control Report Command
Table 31:  Other Report Command
NO Feature Command Name Process
24-1 H.221 Synchronous Status Report H221 Report
24-2 Manufacturer Code Repor t IMAC Report
24-3 Report of Common Mode in Communication IMOD Report
NO Feature Command Name Process
 25-1 Alarm Status Change Report RALM Report
NO Feature Command Name Process
26-1 Incoming Video Synchronous Status Report RVSR Report
NO Feature Command Name Process
27-1 Participating Conference Status Repor t ICST Report
NO Feature Command Name Process
28-1 Display During Calling NALT Report
28-2 Incoming Call Repor t NINC Report
28-3 On-line Report NONL Report
28-4 Disconnection Report NDCI Report
NO Feature Command Name Process
29-1 Camera Status Repor t CAMI Report
29-2 Talker Name Display Report CPNI Report
NO Feature Command Name Process
30-1 SnapShot Transmission Ending Repor t STEI Report
30-2 SnapShot Reception Report RFVR Report
NO Feature Command Name Process
31-1 Automatic Activating File Star ting Repor t CGSI Report
31-2 Automatic Activating File Ending Report CGEI Report 
						

							Page 2-6NDA-24233 Issue 2
Chapter 2 VisuaLink 128/384 Engineering Guide
Table 32:  Multi-point Related Report Command
Table 33:  Multi-Screen Related Report Command
Table 34:  Microphone Command
Table 35:  System Error Command
Table 36:  On-Screen Display
Table 37:  Current Power OFF Condition
NO Feature Command Name Process
32-1 Multi-point Conference Operation Status Repor t IMPS Report
32-2 Multi-point Conference Mode Status Report IMMD Report
32-3 Acquisition of Right to Operate Repor t COPI Report
32-4 Multiple Address Transmission Report CSPI Report
32-5 Specific Picture Reception Report CRPI Report
32-6 Talker Detection Control Report CVCI Report
32-7 SnapShot Transmission Permit Repor t CSSC Report
32-8Multiple Address Originator Monitor Video Switch 
ReportCMPI Report
32-9 Terminal Connection Repor t CJNI Report
32-10 Conference Status Repor t CSTI Report
NO Feature Command Name Process
33-1 Composite Screen Setting Report XMII Report
33-2 Standard Display Screen Setting Repor t XMCI Report
33-3 Response to Composite Screen Setting Request XSCI Report
NO Feature Command Name Process
34-1 Voice Activate Microphone Repor t PPNI Report
NO Feature Command Name Process
35-1 System Error Report ERRI Report
36-1 Setting On-Screen Display SOSD Operation
37-1 Set and read the current Power Off Condition CSTB Status/Report 
						

							NDA-24233 Issue 2Page 3-1
VisuaLink 128/384 Engineering Guide Console Command List
Chapter 3: Command Detailed Format
Command details are described in this section according to the following format.
Command Name Command Number
Description:
Describe command features.
Command Format:
Describe command input format.
Response:
Describe a response to a command. 
						

							Page 3-2NDA-24233 Issue 2
Console Command List VisuaLink 128/384 Engineering Guide
3.1  VIDEO Commands
SVFM Setting Video Format 1-1
RVFM Checking Video Format Setting 1-2
Description:This sets video format. VisuaLink 128/384 is equipped with a feature to 
code active video with kinds of resolution. The formats are QCIF and CIF 
(FICF in parameter) based on the ITU-T Recommendation H.261 and 
H.263.  Resolution setting affects transmitted video. Received video 
format follows a specification from the transmitting side. If FCIF is 
specified in the remote unit, it automatically receives with FCIF 
resolution.
Command Format: SVFM p1
p1: QCIF: QCIF
FCIF: FCIF
Response: Normal Response: OK
Error Response:ERR01
ERR07
ERR14
ERR21
ERR87
Description:Checks the current video format setting.
Command Format: RVFM 
Response: Normal Response: p1 OK
p1: QCIF: QCIF
FCIF: FCIF 
Error Response:ERR01
ERR07
ERR87 
						

							NDA-24233 Issue 2Page 3-3
VisuaLink 128/384 Engineering Guide Console Command List
SPIP Setting Picture-in-Picture 1-3
RPIP Checking Picture-in-Picture Setting 1-4
Description:Sets PIP (small screen) display
Command Format:SPIP p1 p2
p1: ON :  PIP output ON
OFF : PIP output OFF
P2: RT : Display at top right
RB : Display at bottom right
LT :  Display at top left
LB : Display at bottom left
Note:
  p2 is omitted when p1 = Off
Response: Normal Response: OK
Error Response:ERR01
ERR07
ERR85
ERR87
Description:Checks the current PIP display status
Command Format: RPIP
Response:Normal Response: p1 p2 OK
p1: ON : PIP output ON
OFF :  PIP output OFF
p2: RT :  Display at top right
RB : Display at bottom right
LT : Display at top left
LB :  Display at bottom left
Error Response:ERR01
ERR01
ERR87 
						

							Page 3-4NDA-24233 Issue 2
Console Command List VisuaLink 128/384 Engineering Guide
SSND Setting Video Input Switch 1-5
RSND Checking Video Input Setting 1-6
Description: This sets video input switch.
Command Format:SSND p1 p2 
p1: L : local site
R : remote site
p2: C1 : Camera 1
C2 : Camera 2
Response:Normal Response:  OK
Error Response:ERR01
ERR07
ERR20
ERR85
ERR87
Description:Checks the current video input sending status.
Command Format:RSND p1
 
p1: L: local site
R: remote site
Response:Normal Response: p1 OK
p1: C1: Camera 1
C2: Camera 2
Error Response:ERR01
ERR07
ERR20
ERR87