NEC Visualink 128/384 Engineering Guide
Have a look at the manual NEC Visualink 128/384 Engineering Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
NDA-24233 Issue 2Page 3-65 VisuaLink 128/384 Engineering Guide Console Command List 3.25 Alarm Status Report Command RALM Alarm Status Change Report (1 of 2) 25-1 Description: Reports the VisuaLink alarm status. This is reported when alarm and loopback status is changed. Command Format: RALM p1 p2 p3 p4 p5 p6 p1: 00-FF : CPU/ VIDEO alarm p2: 00-FF : LINE alarm p3: 00-FF : H221 alarm p4: 00-FF : Bonding alarm p5: 00-FF : TEST status p6: 00-FF : TEST status 2 p1: CPU/ VIDEO alarm D0 : CPU alarm 0: normal 1: abnormal D1 : FAN alarm 0: normal 1: abnormal D2-3 : Unused 0: fixed D4 : VIDEO alarm 0: normal 1: input cut D5-7 : Unused 0 fixed p2: LINE alarm D0-3 : Unused 0 fixed D4 : SYNC alarm 0: normal 1: abnormal D5 : SYNC alarm 0: normal 1: abnormal D6 : SYNC alarm 0: normal 1: abnormal D7 : Unused 0 fixed p3: H221 alarm D0 : REC alarm 0: normal 1: abnormal D1 : CRC alarm 0: normal 1: abnormal D2-7 : Unused 0 fixed D7 D6D5 D4D3 D2D1 D0 D7 D6D5 D4D3 D2D1 D0 D7 D6D5 D4D3 D2D1 D0
Page 3-66NDA-24233 Issue 2 Console Command List VisuaLink 128/384 Engineering Guide RALM Alarm Status Change Report (2 of 2) 25-1 p4: Bonding alarm D0 : Bonding frame loss 0: normal 1: abnormal D1 : Bonding speed negotiation fail 0: normal 1: abnormal D2 : Bonding type negotiation fail 0: normal 1: abnormal D3 : Dial number negotiation fail 0: normal 1: abnormal D4 : Additional channel connecting error 0: normal 1: abnormal D5-7 : Unused 0: fixed p5: TEST status D0-3 : Unused 0 fixed D4-5 : Local Loopback 00: Off 01: Video 10: Audio 11: LINE D6-7 : Unused 0 fixed P6: TEST status 2 D0-1 : Video mute 0: normal 1: abnormal D2-3 : Unused 0: fixed D4 : Audio mute 0: normal 1: abnormal D5 : Line 1 loopback 0: OFF 1: ON D6 : Line 2 loopback 0: OFF 1: ON D7 : Line 3 loopback 0: OFF 1: ON D7 D6D5 D4D3 D2D1 D0 D7 D6D5 D4D3 D2D1 D0 D7 D6D5 D4D3 D2D1 D0
NDA-24233 Issue 2Page 3-67 VisuaLink 128/384 Engineering Guide Console Command List 3.26 Video Status Report Command RVSR Incoming Video Synchronous Status Report 26-1 Description: VisuaLink monitors a synchronization status of a received video, and a report is made when a received video synchronization status changes. Command Format: RVSR p1 p1: AI : synchronization established DI : out of synchronization
Page 3-68NDA-24233 Issue 2 Console Command List VisuaLink 128/384 Engineering Guide 3.27 Participating Status Report Command ICST Participating Conference Status Report 27-1 Description: Reports participating conference status. Command Format: ICST p1 p2 p1: PP : point – point connection MP : multipoint connection p2: H243 : multi-point conference based on ITU-T H243 MLP : NEC specific multi-point conference Note: When p1 = PP, p2 is omitted.
NDA-24233 Issue 2Page 3-69 VisuaLink 128/384 Engineering Guide Console Command List 3.28 ISDN Report Command NALT Display During Calling 28-1 NINC Incoming Call Report 28-2 NONL On-line Report 28-3 Description: Call report status an origination point. This means calling to remote site. Command Format: NALT Description: Incoming call report. This is a report to indicate a request for connection from a remote unit has been received. Command Format: NINC p1 p2 p3 p1: M : manual incoming call mode A : automatic incoming call mode S : selective incoming call mode p2: Remote site number p3: B : 64 kbps TEL : TEL Description: This is an on-line report. This report to shows the VisuaLink is in communications. Command Format: NONL p1 p1: B : 64 kbps 2B : 2x64 kbps 3B : 192 kbps 4B : 256 kbps 5B : 320 kbps 6B : 384 kbps TEL : TEL
Page 3-70NDA-24233 Issue 2 Console Command List VisuaLink 128/384 Engineering Guide NDCI Disconnection Report 28-4 Description: Reports disconnecting the ISDN line. This is a report to show that communication is disconnected. Section 9 describes the disconnection reason. Command Format: NDCI p1 p2 p3 p4 p5 p6 p7 p8 p1: hh:mm:ss : communication time (hour: minute: seconds) p2: xxxxx : communication fee (0-99, 999) p3: #000-#999 : Reason for CH1 disconnection p4: #000-#999 : Reason for CH2 disconnection p5: #000-#999 : Reason for CH3 disconnection p6: #000-#999 : Reason for CH4 disconnection p7: #000-#999 : Reason for CH5 disconnection p8: #000-#999 : Reason for CH6 disconnection Note: If VL128, p5 ~ p8 do not apply.
NDA-24233 Issue 2Page 3-71 VisuaLink 128/384 Engineering Guide Console Command List 3.29 Camera Control Report Command CAMI Camera Status Report 29-1 CPNI Talker Name Display Report 29-2 Description: This is a status report on the remote camera condition. (When remote camera control is used) Command Format: CAMI p1 p1: 0 : not connected 1 : fixed camera 3 : preset camera Description: This is a report on a conference room number of a remote camera and a preset talker name. Command Format: CPNI p1 p2 p1: 0-99 : conference room number p2: xxxxx : preset talker name (alphabet 16-character)
Page 3-72NDA-24233 Issue 2 Console Command List VisuaLink 128/384 Engineering Guide 3.30 Option Control Report Command STEI SnapShot Transmission Ending Report 30-1 RFVR SnapShot Reception Report 30-2 Description: This is a report notifying a snapshot transmission is completed. Command Format: STEI p1 p1: OK : normal ending NG : failure Description: This is a report when receiving a snapshot picture. Command Format: RFVR p1 p1: 01: receiving 00: receiving is completed
NDA-24233 Issue 2Page 3-73 VisuaLink 128/384 Engineering Guide Console Command List 3.31 Other Report Command CGSI Automatic Activation File Starting Report 31-1 CGEI Automatic Activating File Ending Report 31-2 Description: This is a report to show the start of auto executed file. Command Format: CGSI p1 p1: 0-7 : number of file for auto executed file Description: This is a report to show the completion of auto executed file. Command Format: CGEI p1 p2 p1: 0-7 : number of file for auto executed file p2: xxxxx : ending result xxxx : OK : normal ending EMPTY : no data EX ERR : access error CMD ERR : command execution error
Page 3-74NDA-24233 Issue 2 Console Command List VisuaLink 128/384 Engineering Guide 3.32 Multi-Point Related Report Command IMPS Multi-point Conference Operation Status Report 32-1 IMMD Multi-point Conference Mode Status Report 32-2 COPI Acquisition of Right to Operate Report 32-3 Description: This is a report on the status of multi-point conference. Command Format: IMPS p1 p2 p3 p4 p5 p6 p1: 1-255 : local site conference room number p2: 0/1 : status of acquisition of a right to operate in a local site 1: acquired 0: released p3: 1-255 : location number of a video transmitting p4: 0/1 : local site transmitting status 0: OFF 1: ON p5: 1-255 : a number of multi-point conference participants p6: 0/1 : screen composite capability 0: none 1: yes Description: This is a report on the status of multi-point conference mode. Command Format: IMMD p1 p1: 1: audio switch 2: local site transmission 3: operator 4: reception selection 5: a status of multiple address transmission by operator Description: This is a report on the acquisition or release of right of chairman mode. Command Format: COPI p1 p2 p1: 1-255 : conference room number p2: ON/OFF : acquire/ release