NEC Visualink 128/384 Engineering Guide
Have a look at the manual NEC Visualink 128/384 Engineering Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
NDA-24233 Issue 2Page 3-75 VisuaLink 128/384 Engineering Guide Console Command List CSPI Multiple Address Transmission Report 32-4 CRPI Specific Picture Reception Report 32-5 CVCI Talker Detection Control Report 32-6 Description: This is to report the completion of a simulcast transmission. Command Format: CSPI p1 p1: 0-255, * : conference room number Note 1: When p1 = 0, it indicates a release of a multiple address transmission in H.243 multi-point conference. Note 2: When p1 = *, it indicates a screen composition. Description: This report on a completion of specific video reception process. Command Format: CRPI p1 p2 p3 p1: 1-255 : reception side conference room number p2: 1-255/* : transmission side conference room number p3: ON/OFF : reception selection setting/ release Note 1: In a NEC specific multi-point conference, 1-14 only can be specified. Note 2: In p2, * indicates a screen composition. Description: This report the execution of an audio switch process. Command Format: CVCI p1 p2 p1: 0-255 : audio switch control conference room number p2: ON/OFF : audio switch execution/ release Note: When p1 = 0, it indicates a general setting.
Page 3-76NDA-24233 Issue 2 Console Command List VisuaLink 128/384 Engineering Guide CSSC SnapShot Transmission Permit Report 32-7 CMPI Multiple Address Originator Monitor Video Switch Report 32-8 CJNI Terminal Connection Report 32-9 Description: This report is a request to transmit a snapshot. Command Format: CSSC p1 p1: 1-255 : conference room number where a still-picture transmission request was made. Description: This report a conference room number for a monitor of a simulcast transmission originator. Command Format: CMPI p1 p2 p1: 1-255/* : conference room number of simulcast transmission originator p2: 1=255/*: conference room number to be monitored by simulcast transmission originator Note: In p1 and p2, * indicates screen composition. Description: This is a terminal connection report. Command Format: CJNI p1 p1: 1-255 : conference room number of participating terminal
NDA-24233 Issue 2Page 3-77 VisuaLink 128/384 Engineering Guide Console Command List CSTI Conference Status Report 32-10 Description: This is to report the multi-point conference status. This is reported only in a NEC specific multi-point conference. Command Format: CSTI p1 p2 p3 p4 p5 p6 ............ p18 p1: 1-14 : local site conference number p2: 0000-FFFF : conference participating status 1: participate 0: not participate p3: 0000-FFFF : terminal connection status 1: connect 0: not connected p4: 0000-FFFF : audio switch status 1: switch 0: not switch p5: 0000 : fixed p6: 0000 : fixed p7: 1-14 : operator conference room number 00: no operator p8: 1-14 : conference room number of the originator of multiple address transmission p9: 1-14 : conference room number of a location receiving multiple address transmission. p10: 1-14 : conference room number of the originator of a transmission at a specified video reception. It is not a specific video reception if it is 00. p11: 0 : fixed p12: 0 : fixed p13: 0 : fixed p14: 0 : fixed p15: 0 : fixed p16: 0 : fixed p17: 1111 : fixed p18: 0-1 : local site in transmission 0: not transmitting 1: transmitting Note 1: When p1 = 0, a local office withdraw from a multi-point conference. Note 2: Bit assignment of 0000-FFFF is as follows. XX 14131211109876543 21 Master Only Slave Master
Page 3-78NDA-24233 Issue 2 Console Command List VisuaLink 128/384 Engineering Guide 3.33 Multi-Screen Related Report Command XMII Composite Screen Setting Report 33-1 XMCI Standard Display Screen Setting Report 33-2 Description: Reports a composite screen setting. Command Format: XMII p1 p2/p3 p4=p5: p6 p1: Composite Screen Status D7-D5 : 0 fixed D4-D3 : re-lineup 00: none 10: in the order of terminal number D2 : speaker display 0: none 1: yes D1-D0 : 0 fixed p2 : Number of Composite Screen : 04: 4 screens 09: 9 screens 16: 16 screens p3 : Composite Pattern : A fixed p4 : Composite Screen Position : 01~16 p5 : MCU number : 00-FF p6 : Terminal number : 00-FF Example: XMII 00 04/A 01=01:01 02=01:02 03=01:03 Note: p4=p5:p6 is reported only when received from a MCU. Description: Reports a standard display screen setting. Command Format: XMCI p1 p1: S : single screen M : multiple composite screen D7 D6D5 D4D3 D2D1 D0
NDA-24233 Issue 2Page 3-79 VisuaLink 128/384 Engineering Guide Console Command List XSCI Response to Composite Screen Setting Request 33-3 Description: This is a response report of composite screen setting/acquisition request. Command Format: XSCI p1 p1: OK : normal ERRxx : NG
Page 3-80NDA-24233 Issue 2 Console Command List VisuaLink 128/384 Engineering Guide 3.34 Microphone Command PPNI Voice Activate Microphone Report 34-1 Description: Report microphone that inputs the voice Command Format: PPNI p1 p1: 1 to 3
NDA-24233 Issue 2Page 3-81 VisuaLink 128/384 Engineering Guide Console Command List 3.35 System Error Command ERRI System Error Report 35-1 Description: Report system error Command Format: ERRI p1 p1: [S_RAM] BACKUP ERROR: SRAM error [SYSTEM] BACKUP ERROR: System parameter error [M_DIAL] BACKUP ERROR: Speed dial information error [S_NAME] BACKUP ERROR: Preset talker name error [C_PRIS] BACKUP ERROR: VC-C1 preset error [CG FILE] BACKUP ERROR: CG file error [S_PRIS BACKUP ERROR: EVI-D30 preset error [R_DIAL] BACKUP ERROR: Redial information error [AEC_7K] INITIAL ERROR: Echo canceller initialize failure
Page 3-82NDA-24233 Issue 2 Console Command List VisuaLink 128/384 Engineering Guide 3.36 On-Screen Command SOSD Setting On-Screen Display 36-1 Description: Sets the On-Screen displays for the VisuaLink Command Format: SOSD p1 p1: ON: Activates the On-Screen Message OFF: Deactivates the On-Screen Message Response: Normal Response: OK Error Response: ERR01 ERR07 ERR85 ERR87
NDA-24233 Issue 2Page 3-83 VisuaLink 128/384 Engineering Guide Console Command List 3.37 Current Power OFF Condition CSTB Current Power OFF Condition 37-1 Description: Set and read the current Power OFF Condition. The CODEC outputs black video when no user intervention has been acted on for a period of time. Command Format: CSTB p1 p1: 00 - 10: up to 10 minutes with one minute intervals CSTB Response: Normal Response: OK Normal Response: 05 OK
Page 3-84NDA-24233 Issue 2 Console Command List VisuaLink 128/384 Engineering Guide This page is for your notes.