NEC Visualink 128/384 Engineering Guide

NDA-24233 Issue 2Page 3-45
VisuaLink 128/384 Engineering Guide Console Command List
3.15  Maintenance and Other Command
ISPR Setting Parameter Initialization 15-1
CRAM Clearing Backup Memory 15-2
RRST System Reset Request 15-3
Description: Initializes all VisuaLink values to factory default.
Command Format: ISPR
Response: Normal Response  OK
Error Response:  ERR01
Description: Initializes registered data.
Command Format: CRAM p1
p1: T :  abbreviated speed dial registration
S :  camera preset...

Page 3-46NDA-24233 Issue 2
Console Command List VisuaLink 128/384 Engineering Guide
WCLK Setting System Clock 15-4
RCLK Checking System Clock Setting 15-5
Description: Sets the VisuaLink built-in system clock, date and time.
Command Format: WCLK p1-p2-p3 p4:p5:p6 (p7)
p1: yyyy :  year
p2: 01-12 :  month
p3: 01-31 :  date 
p4: 01-24 :  hour
p5: 00-59 :  minute
p6: 00-59 :  second
p7: xxx  :  day of the week
(MON/ TUE/ WED/ THU/ FRI/ SAT/ SUN)
Response: Normal Response  OK
Error Response:  ERR01...

NDA-24233 Issue 2Page 3-47
VisuaLink 128/384 Engineering Guide Console Command List
3.16  Mutli-point Conference Status Command
RMNA Read Multi-point Conference Participating Location Name 16-1
Description: Acquires location name of all location participating locations in multi-
point conference.
Command Format: RMNA p1
p1: 1-255 : conference room number (can be specified in 
multiple)
Response: Normal Response p1 p2 p3 OK
p1: 1-999 : conference room number
p2: xxxxxxxx  :  location name in alphabet 
p3:...

Page 3-48NDA-24233 Issue 2
Console Command List VisuaLink 128/384 Engineering Guide
RMST Read Multi-point Conference Operation Status (NEC Specific) 16-2
Description: Acquires a status of a multi-point conference status when in activated for 
NEC specific multi-point conference.
Command Format: RMST p1 p2 p3 p4 p5 p6 ............ p18
p1: 1-14  :  local site conference number
p2: 0000-FFFF  :  conference participating status 1: participate 
0: not participate
p3: 0000-FFFF  :  terminal connection status...

NDA-24233 Issue 2Page 3-49
VisuaLink 128/384 Engineering Guide Console Command List
RMPS Read Multi-point Conference Operation Status 16-3
RMMD Read Multi-point Conference Mode Status 16-4
Description: Acquires the multi-point conference status.
Command Format: RMPS
Response: Normal Response p1 p2 p3 p4 p5 p6 OK
p1: 1-255  : local site conference room number
p2: 0/1  :  status of acquisition of a right to operate in a local site 
1: acquired 0: released 
p3: 1-255  :  location number of a video being...

Page 3-50NDA-24233 Issue 2
Console Command List VisuaLink 128/384 Engineering Guide
3.17  Model Identification Command
RMES Read Model Identification 17-1
Description: Read model identification
Command Format: RMES
Response: Normal Response p1 p2 OK
p1: TC2000_EC : VL128
TC2000_6B : VL384
p2: F/W version: ex. V01.01.01
Error Response:ERR01 

NDA-24233 Issue 2Page 3-51
VisuaLink 128/384 Engineering Guide Console Command List
3.18  Audio Training Command
ECTS Audio Training Command 18-1
Description: Initiate audio training.  White noise is generated while 7 seconds.
Command Format: ECTS
Response: Normal Response OK
Error Response:ERR01 

Page 3-52NDA-24233 Issue 2
Console Command List VisuaLink 128/384 Engineering Guide
3.19  ISDN Control Command
NCRN Requesting Connection 19-1
Description: Placing a BRI ISDN call.  A call can be requested by either directly 
specifying a remote number or using an speed dial number.  If using an 
speed dial number, it must be registered in advance with MDST command.
Command Format: NCRN  p1 p2 p3
p1: #xx  :  speed dial call (xx : speed dial number)
0-9  :  dial number (within 20-digit)
   Sub address...

NDA-24233 Issue 2Page 3-53
VisuaLink 128/384 Engineering Guide Console Command List
NDSC Requesting Disconnection 19-2
NCIC Incoming Call Permit/Reject 19-3
Description: A disconnect in an BRI ISDN call.  This command is used to execute a 
disconnection request and ending communication.
Command Format: NDSC
Response: Normal Response:  OK
Error Response:  ERR01
ERR41
ERR46
ERR48
ERR87
Description: Permits or rejects incoming call on the BRI ISDN live.  When a manual 
incoming call mode is selected with a...

Page 3-54NDA-24233 Issue 2
Console Command List VisuaLink 128/384 Engineering Guide
NSTQ Communication Status Inquiry 19-4
Description: Gives a status on the ISDN communication.
Command Format: NSTQ 
Response: Normal Response p1 p2 p3  p4 p5 p6 p7 OK
p1: B : communication speed B
2B :  communication speed 2B
3B : communication speed 3B
4B : communication speed 4B
5B : communication speed 5B
6B : communication speed 6B
TEL :  communication speed TEL
p2: xx  :  ch1 communication status (see below)    
p3:...