NEC Visualink 128/384 Engineering Guide

NDA-24233 Issue 2Page 2-1
VisuaLink 128/384 Engineering Guide Chapter 2
Chapter 2: Console Command List
Table 1:  VIDEO Command
Table 2:  AUDIO Command
Table 3:  LINE Setting Command
NO Feature Command Name Process
1-1 Setting Video Format SVFM Setting
1-2 Checking Video Format Setting RVFM Status
1-3 Setting Picture-in-Picture SPIP Setting
1-4 Checking Picture-in-Picture Setting RPIP Status
1-5 Setting Video Input Switch SNDS Setting
1-6 Checking Video Input Setting RSND Status
1-7 Setting Monitor...

Page 2-2NDA-24233 Issue 2
Chapter 2 VisuaLink 128/384 Engineering Guide
Table 4:  DATA Command
Table 5:  ISDN Registering/Setting Command
Table 6:  Camera related Registering/Setting Command
Table 7:  Communication Status Reading Command
Table 8:  Alarm related Command
Table 9:  History Reading Command
NO Feature Command Name Process
4-1 Setting LSD Speed SAM2 Setting
4-2 Checking LSD Speed Setting RAM2 Status
4-3 Setting MLP Speed SDM3 Setting
4-4 Checking MLP Speed Setting RDM3 Status
NO Feature...

NDA-24233 Issue 2Page 2-3
VisuaLink 128/384 Engineering Guide Chapter 2
Table 10:  Registering Local Location Name Command
Table 11:  Serial Port Control Command
Table 12:  Acquiring Version Command
Table 13:  Maintenance Command
Table 14:  Report Response Control Command
Table 15:  Maintenance and Other Command
Table 16:  Maintenance and Other Command
NO Feature Command Name Process
10-1 Registering Local Site Name MRNS Setting
NO Feature Command Name Process
11-1 Setting Serial Port SSIO Setting
11-2...

Page 2-4NDA-24233 Issue 2
Chapter 2 VisuaLink 128/384 Engineering Guide
Table 17:  Model Identification Command
Table 18:  Audio Training Command
Table 19:  ISDN Control Command
Table 20:  Camera Control Command
Table 21:  Option Control Command
Table 22:  Multi-point Conference Control 
Table 23:  Opening Message Command
NO Feature Command Name Process
17-1 Read Model Identification RMES Status
NO Feature Command Name Process
18-1 Initiate Audio Training ECTS Operation
NO Feature Command Name Process...

NDA-24233 Issue 2Page 2-5
VisuaLink 128/384 Engineering Guide Chapter 2
Table 24:  Communication Status Report Command
Table 25:  Alarm Status Report Command
Table 26:  Video Status Report Command
Table 27:  Participating Status Report Command
Table 28:  ISDN - Report Command
Table 29:  Camera Control Report Command
Table 30:  Option Control Report Command
Table 31:  Other Report Command
NO Feature Command Name Process
24-1 H.221 Synchronous Status Report H221 Report
24-2 Manufacturer Code Repor t IMAC...

Page 2-6NDA-24233 Issue 2
Chapter 2 VisuaLink 128/384 Engineering Guide
Table 32:  Multi-point Related Report Command
Table 33:  Multi-Screen Related Report Command
Table 34:  Microphone Command
Table 35:  System Error Command
Table 36:  On-Screen Display
Table 37:  Current Power OFF Condition
NO Feature Command Name Process
32-1 Multi-point Conference Operation Status Repor t IMPS Report
32-2 Multi-point Conference Mode Status Report IMMD Report
32-3 Acquisition of Right to Operate Repor t COPI Report...

NDA-24233 Issue 2Page 3-1
VisuaLink 128/384 Engineering Guide Console Command List
Chapter 3: Command Detailed Format
Command details are described in this section according to the following format.
Command Name Command Number
Description:
Describe command features.
Command Format:
Describe command input format.
Response:
Describe a response to a command. 

Page 3-2NDA-24233 Issue 2
Console Command List VisuaLink 128/384 Engineering Guide
3.1  VIDEO Commands
SVFM Setting Video Format 1-1
RVFM Checking Video Format Setting 1-2
Description:This sets video format. VisuaLink 128/384 is equipped with a feature to 
code active video with kinds of resolution. The formats are QCIF and CIF 
(FICF in parameter) based on the ITU-T Recommendation H.261 and 
H.263.  Resolution setting affects transmitted video. Received video 
format follows a specification from the...

NDA-24233 Issue 2Page 3-3
VisuaLink 128/384 Engineering Guide Console Command List
SPIP Setting Picture-in-Picture 1-3
RPIP Checking Picture-in-Picture Setting 1-4
Description:Sets PIP (small screen) display
Command Format:SPIP p1 p2
p1: ON :  PIP output ON
OFF : PIP output OFF
P2: RT : Display at top right
RB : Display at bottom right
LT :  Display at top left
LB : Display at bottom left
Note:
  p2 is omitted when p1 = Off
Response: Normal Response: OK
Error Response:ERR01
ERR07
ERR85
ERR87...

Page 3-4NDA-24233 Issue 2
Console Command List VisuaLink 128/384 Engineering Guide
SSND Setting Video Input Switch 1-5
RSND Checking Video Input Setting 1-6
Description: This sets video input switch.
Command Format:SSND p1 p2 
p1: L : local site
R : remote site
p2: C1 : Camera 1
C2 : Camera 2
Response:Normal Response:  OK
Error Response:ERR01
ERR07
ERR20
ERR85
ERR87
Description:Checks the current video input sending status.
Command Format:RSND p1
 
p1: L: local site
R: remote site
Response:Normal...