NEC Visualink 128/384 Engineering Guide
Here you can view all the pages of manual NEC Visualink 128/384 Engineering Guide. The NEC manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 81
NDA-24233 Issue 2Page 3-55 VisuaLink 128/384 Engineering Guide Console Command List 3.20 Camera Control Command CAMS Request for Camera Direction Change 20-1 Description: Sets camera head swing control. This command is valid only when an preset or auto mode camera is in use. A control of Camera 2 is only valid when the camera is the EVI-D30 type. Command Format: CMAS p1 p2 p1: L1-2 : local camera 1/ 2 control R1-2 : remote camera 1/ 2 control p2: 1-9 : preset number Z x : zoom change F x :...
Page 82
Page 3-56NDA-24233 Issue 2 Console Command List VisuaLink 128/384 Engineering Guide 3.21 Option Control Command POCS Pointer Control 21-1 VCTS Talker Detection Control 21-2 Description: Activates or deactivates the on-screen pointer . The pointer is displayed at the remote monitor. This pointer can only be activated when both systems (Remote/Local) are set to a NEC mode. Command Format: POCS p1 p2 p3 p1: ON/OFF : control on/off p2: 1-99 : X-axis p3: 1-99 : Y-axis Response: Normal Response: When...
Page 83
NDA-24233 Issue 2Page 3-57 VisuaLink 128/384 Engineering Guide Console Command List STPR SnapShot Transmission Request 21-3 SXMR Standard Display Screen Setting Request 21-4 Description: Sends a snapshot (still graphic) image to the remote site. Command Format: STRP Response: Normal Response OK Error Response: ERR01 Description: Requests for a display setting change when going through the MCU. This command is only valid when going through an NEC multi-point control unit, that has multi-screen...
Page 84
Page 3-58NDA-24233 Issue 2 Console Command List VisuaLink 128/384 Engineering Guide SXST Request to Acquire Composite Screen Setting 21-5 Description: Request for status on the various video screens displays. This command is only valid when going through an NEC multi-point control unit MCU5000A, that has multi-screen control capability. Command Format: SXST p1 p2 p3 p1: Composite Screen Status D7-D5 : 0 fixed D4-D3 : re-lineup 00: none 10: in the order of terminal number D2 : speaker display...
Page 85
NDA-24233 Issue 2Page 3-59 VisuaLink 128/384 Engineering Guide Console Command List 3.22 Multi-point Conference Control COPR Request to Chairman Control 22-1 Description: Acquires or deletes chairman control. Command is only valid when the VisuaLink is in a multi-point conference. Command Format: COPR p1 p2 p1: 1-14 : conference room number (specified only in a NEC specific multi-point conference) p2: ON : acquire OFF : release Note 1: When p1 is omitted, it becomes a local office conference...
Page 86
Page 3-60NDA-24233 Issue 2 Console Command List VisuaLink 128/384 Engineering Guide CSPR Multiple Address Transmission Request 22-2 Description: Acquires the simulcast transmission. Command Format: CSPR p1 p1: 0-255 : conference room number to be received * : composite screen display Note 1: When p1 is omitted, it becomes a local office conference room number. Also in a NEC specific multi-point conference, 1-14 only can be specified. Note 2: In p1, * is valid only when a MCU to connect has a...
Page 87
NDA-24233 Issue 2Page 3-61 VisuaLink 128/384 Engineering Guide Console Command List CRPR Specific Picture Reception Request 22-3 CMPR Request to Switch Multiple Address Originator Monitor 22-4 Description: Activates or deactivates selective receive mode. Command Format: CRPR p1 p2 p3 p1: 1-255 : reception side conference room number p2: 1-255 : transmission side conference room number * : composite screen display p3: ON : reception selection setting/ release OFF : reception selection release...
Page 88
Page 3-62NDA-24233 Issue 2 Console Command List VisuaLink 128/384 Engineering Guide 3.23 Opening Control Command OMES Opening Message at Unit Activation 23-1 Description: Report opening message at power up. This is reported when the unit is automatically re-start due to some failure. In the case of automatic reset, please perform necessary procedures to reconnect the line. Command Format: OMES p1 p2 p1: TC2000-EC : VL128 TC2000-6B : VL384 p2: F/W version (ex) V01.00.00
Page 89
NDA-24233 Issue 2Page 3-63 VisuaLink 128/384 Engineering Guide Console Command List 3.24 Communication Status Report Command H221 H.221 Synchronous Status Report 24-1 IMAC Manufacturer Code Report 24-2 Description: H.221 reporting status change. Command Format: H221 p1 p1: AI : synchronization established DI : out of synchronization Description: Reports a manufacturer code for the remote site. Command Format: IMAC p1 p2 p3 p4 p5 OK p1: 00-FF : Manufacturer code 49 : NEC Else : other vendor p2:...
Page 90
Page 3-64NDA-24233 Issue 2 Console Command List VisuaLink 128/384 Engineering Guide IMOD Report of Common Mode in Communication 24-3 Description: Reports the negotiated mode during a communication. Command Format: RMOD p1 p2 p3 p4 p5 p6 p7 p8 p1: B/2B/3B/4B/5B/6B : communication speed p2: 56/64 : network TYPE p3: QCIF/FCIF : video format p4: ULW/ SBA/ LDC/ OFF : audio mode p5: 4.0/6.4/14.4/24.0/VMLP/OFF : MLP speed p6: ON/OFF : MBE capability p7: ON/OFF : T120 capability P8:...