NEC Visualink 128/384 Engineering Guide
Here you can view all the pages of manual NEC Visualink 128/384 Engineering Guide. The NEC manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 91
NDA-24233 Issue 2Page 3-65 VisuaLink 128/384 Engineering Guide Console Command List 3.25 Alarm Status Report Command RALM Alarm Status Change Report (1 of 2) 25-1 Description: Reports the VisuaLink alarm status. This is reported when alarm and loopback status is changed. Command Format: RALM p1 p2 p3 p4 p5 p6 p1: 00-FF : CPU/ VIDEO alarm p2: 00-FF : LINE alarm p3: 00-FF : H221 alarm p4: 00-FF : Bonding alarm p5: 00-FF : TEST status p6: 00-FF : TEST status 2 p1: CPU/ VIDEO alarm D0 : CPU alarm...
Page 92
Page 3-66NDA-24233 Issue 2 Console Command List VisuaLink 128/384 Engineering Guide RALM Alarm Status Change Report (2 of 2) 25-1 p4: Bonding alarm D0 : Bonding frame loss 0: normal 1: abnormal D1 : Bonding speed negotiation fail 0: normal 1: abnormal D2 : Bonding type negotiation fail 0: normal 1: abnormal D3 : Dial number negotiation fail 0: normal 1: abnormal D4 : Additional channel connecting error 0: normal 1: abnormal D5-7 : Unused 0: fixed p5: TEST status D0-3 : Unused 0 fixed D4-5...
Page 93
NDA-24233 Issue 2Page 3-67 VisuaLink 128/384 Engineering Guide Console Command List 3.26 Video Status Report Command RVSR Incoming Video Synchronous Status Report 26-1 Description: VisuaLink monitors a synchronization status of a received video, and a report is made when a received video synchronization status changes. Command Format: RVSR p1 p1: AI : synchronization established DI : out of synchronization
Page 94
Page 3-68NDA-24233 Issue 2 Console Command List VisuaLink 128/384 Engineering Guide 3.27 Participating Status Report Command ICST Participating Conference Status Report 27-1 Description: Reports participating conference status. Command Format: ICST p1 p2 p1: PP : point – point connection MP : multipoint connection p2: H243 : multi-point conference based on ITU-T H243 MLP : NEC specific multi-point conference Note: When p1 = PP, p2 is omitted.
Page 95
NDA-24233 Issue 2Page 3-69 VisuaLink 128/384 Engineering Guide Console Command List 3.28 ISDN Report Command NALT Display During Calling 28-1 NINC Incoming Call Report 28-2 NONL On-line Report 28-3 Description: Call report status an origination point. This means calling to remote site. Command Format: NALT Description: Incoming call report. This is a report to indicate a request for connection from a remote unit has been received. Command Format: NINC p1 p2 p3 p1: M : manual incoming call mode A :...
Page 96
Page 3-70NDA-24233 Issue 2 Console Command List VisuaLink 128/384 Engineering Guide NDCI Disconnection Report 28-4 Description: Reports disconnecting the ISDN line. This is a report to show that communication is disconnected. Section 9 describes the disconnection reason. Command Format: NDCI p1 p2 p3 p4 p5 p6 p7 p8 p1: hh:mm:ss : communication time (hour: minute: seconds) p2: xxxxx : communication fee (0-99, 999) p3: #000-#999 : Reason for CH1 disconnection p4: #000-#999 : Reason for CH2...
Page 97
NDA-24233 Issue 2Page 3-71 VisuaLink 128/384 Engineering Guide Console Command List 3.29 Camera Control Report Command CAMI Camera Status Report 29-1 CPNI Talker Name Display Report 29-2 Description: This is a status report on the remote camera condition. (When remote camera control is used) Command Format: CAMI p1 p1: 0 : not connected 1 : fixed camera 3 : preset camera Description: This is a report on a conference room number of a remote camera and a preset talker name. Command Format: CPNI...
Page 98
Page 3-72NDA-24233 Issue 2 Console Command List VisuaLink 128/384 Engineering Guide 3.30 Option Control Report Command STEI SnapShot Transmission Ending Report 30-1 RFVR SnapShot Reception Report 30-2 Description: This is a report notifying a snapshot transmission is completed. Command Format: STEI p1 p1: OK : normal ending NG : failure Description: This is a report when receiving a snapshot picture. Command Format: RFVR p1 p1: 01: receiving 00: receiving is completed
Page 99
NDA-24233 Issue 2Page 3-73 VisuaLink 128/384 Engineering Guide Console Command List 3.31 Other Report Command CGSI Automatic Activation File Starting Report 31-1 CGEI Automatic Activating File Ending Report 31-2 Description: This is a report to show the start of auto executed file. Command Format: CGSI p1 p1: 0-7 : number of file for auto executed file Description: This is a report to show the completion of auto executed file. Command Format: CGEI p1 p2 p1: 0-7 : number of file for auto executed file...
Page 100
Page 3-74NDA-24233 Issue 2 Console Command List VisuaLink 128/384 Engineering Guide 3.32 Multi-Point Related Report Command IMPS Multi-point Conference Operation Status Report 32-1 IMMD Multi-point Conference Mode Status Report 32-2 COPI Acquisition of Right to Operate Report 32-3 Description: This is a report on the status of multi-point conference. Command Format: IMPS p1 p2 p3 p4 p5 p6 p1: 1-255 : local site conference room number p2: 0/1 : status of acquisition of a right to operate in a local...