NEC Visualink 128/384 Director Guide

							NDA-24248 Revision 1.0Page v
VisuaLink 128/384 Director Guide List of Figures
Figure 11-8 Line Setting  .......................................................................................... 11-8
Figure 11-9 Serial Setting  ........................................................................................ 11-9
Figure 11-10 Change Password Menu  .................................................................... 11-10
Figure 11-11 Change Password  .............................................................................. 11-10
Figure 11-12 Maintenance Menu  ............................................................................. 11-12
Figure 11-13 Loopback Test  .................................................................................... 11-12
Figure 11-14 Maintenance Menu  ............................................................................. 11-14
Figure 11-15 Communication History  ...................................................................... 11-15
Figure 12-1 Help Menu  ............................................................................................ 12-1
Figure 12-2 Help Topics Menu  ................................................................................ 12-1
Figure 12-3 Help Menu  ............................................................................................ 12-2
Figure 12-4 Version Information  .............................................................................. 12-2 
						

							Page viNDA-24248 Revision 1.0
List of Figures VisuaLink 128/384 Director Guide
This page is for your notes. 
						

							NDA-24248 Revision 1.0Page 1-1
VisuaLink 128/384 Director Guide Chapter 1
Chapter 1 Introduction and Installation
1.1 Welcome to 
VisuaLink 
DirectorThis Microsoft Windows 95 software allows the desktop or laptop computer to 
control the VisuaLink 128/384, thereby providing complete control of the 
videoconference. All functions are provided with easy to use PC screen messages 
and menus. 
Note:
The VisuaLink Director software is not include with the package, but can 
be obtained via the Internet at:
http://www.cng.nec.com/html/productd.htm.
1.2 Hardware 
Requirements1.2.1  Personal Computer
CPU : Pentium 100Mhz or higher
Memory : 32M byte or more
Hard disk : 100M byte or more available space
1.2.2  High Resolution Display 
640x480 series, utilizing 256 colors or more 
1.2.3  Other Hardware
To display video:
Desktop Computer Video Capture Board
Laptop Computer Video Capture PCMCIA Card
To start a data conference on Lap Top:
Expansion Serial PCMCIA Card
1.3 Software 
Requirements1.3.1  Operating System
Windows 95
1.3.2  Other Software
Video Control Application
Attached application software Included with the Video Capture Board (Card)
Data Conference Application
FarSite3.0 (DataBeam) is recommended.
1.3.3  Driver
Video capture board or PCMCIA driver is necessary. 
						

							Page 1-2NDA-24248 Revision 1.0
Chapter 1 VisuaLink 128/384 Director Guide
1.4 Installing 
VisuaLink 
Director1.4.1  Start the set up program
Insert the diskette labeled 1 of 2 into the computer’s floppy drive. 
Select Start
 from the task bar
Figure 1-1:   Start Icon
Select Setting from the menu and then select Control Panel.
Figure 1-2:   Setting Menu
Select Add/Remove Programs
 from the Control Panel.
Figure 1-3:   Control Panel 
						

							NDA-24248 Revision 1.0Page 1-3
VisuaLink 128/384 Director Guide Chapter 1
Select the Install…
 button from the Install/Uninstall window.
Figure 1-4:   Install/Uninstall
Select the Next>
 button from the Install Program screen
Figure 1-5:   Install Program 
						

							Page 1-4NDA-24248 Revision 1.0
Chapter 1 VisuaLink 128/384 Director Guide
The Run Installation Program
 screen appears.
Figure 1-6:   Run Installation Program
Make sure that Command line corresponds with your floppy disk drive.  Then 
select the Finish
 button from the Run Installation Program.  
1.4.2  Welcome screen
The Wel come
 screen with dialog appears. 
Figure 1-7:   Welcome Screen
Carefully read the instruction, then select the Next>
 button. 
						

							NDA-24248 Revision 1.0Page 1-5
VisuaLink 128/384 Director Guide Chapter 1
1.4.3  Destination Directory
T
he Destination Directory 
displays 
the destination of the VisuaLink Director 
software directory.
Figure 1-8:   Destination Directory
To accept a default destination directory, select the Next> 
button.
To change the destination directory, select the Browse…
 button to select a 
different directory or to make a new directory. 
Figure 1-9:   Choose Directory
Select the OK
 button when finished. 
						

							Page 1-6NDA-24248 Revision 1.0
Chapter 1 VisuaLink 128/384 Director Guide
1.4.4  Program Folder
Select the program folder from this screen.  The software will automatically make 
a software folder called NEC Conference System.
Figure 1-10:   Select Program Folder
To accept the default name of program folder, select the Next> 
button.
To change the name of program folder, type a new program folder name. 
Then, select the Next> 
button. 
						

							NDA-24248 Revision 1.0Page 1-7
VisuaLink 128/384 Director Guide Chapter 1
1.4.5  Start installation
The Installation screen is shows the software’s installation progress.
Figure 1-11:   Installation Screen
While the file copy procedure, Next Diskette
 dialog appears.
Figure 1-12:   Next Disk
Follow the instruction; insert the diskette labeled 2 of 2 into the computer’s floppy 
drive, then select the OK 
button. 
						

							Page 1-8  NDA-24248 Revision 1.0
Chapter 1   VisuaLink 128/384 Directo r Guide
1.4.6  Set up Completion