NEC Neax2000 Ivs Feature Programming Manual

CHAPTER 2 ND-45670 (E)
Pag e 2 4
Revision 2.0
ALPHANUMERIC DISPLAY
PROGRAMMING
DESCRIPTION DATA
Provide the system with the Name Display 
Service. (1) 255 
(2) 1 :  To be provided
Station number and number display provided 
when an incoming call terminates to a Prime 
Line and a Primary Extension.(1) 335 
(2) 1 :  To be provided 
Assign the access code for station user name 
entry (used from individual stations).• Y= 0-3 (Numbering Plan Group 0-3) 
(1) X-XXX:  Access Code (62)
(2) A10 
Assign a Trunk...

ND-45670 (E) CHAPTER 2
Page 25
Revision 2.0
ALPHANUMERIC DISPLAY
Note 1:The maximum number of stations that can be provided with the user’s name display is 384. The maximum
number of characters per name is eight, including spaces. The Maintenance Administration Terminal
(MAT) or Customer Administration Terminal (CAT) can be used to register or change a name. A Multiline
Terminal can register or change the name assignment of that individual Multiline Terminal.
Note 2:User names can be assigned to stations...

CHAPTER 2 ND-45670 (E)
Pag e 2 6
Revision 2.0
ALPHANUMERIC DISPLAY
Character Code Table
234567
0
0@P \ p
1!1AQaq
2”2BRb r
3#3CSc s
4$4DTd t
5%5 EU e u
6&6 FV f v
7’7GWgw
8(8HXhx
9)9IYiy
A*: JZjz
B+;K[k{
C,N^n®
F/?O_o¬
1ST
2ND 

ND-45670 (E) CHAPTER 2
Page 27
Revision 2.0
ANALOG PORT ADAPTER (1200 Series Enhancement)
PROGRAMMING
To assign the Single Port Mode:
To assign the Dual Port Mode:
1. Data Assignment for Multiline Terminal accommodates the Analog Port Adapter.
DESCRIPTION DATA
Provide the Analog Port Adapter to the 
required stations.• YY=32
(1) X-XXXX: Primary Extension No.
(2) 0: To be provided
Assign the Single Port Mode to the required 
stations.• YY=33
(1) X-XXXX: Primary Extension No.
(2) 1 : Single Port Mode...

CHAPTER 2 ND-45670 (E)
Pag e 2 8
Revision 2.0
ANALOG PORT ADAPTER (1200 Series Enhancement)
2. Data Assignment for Analog Terminal connected to the Analog Port Adapter.
.
DESCRIPTION DATA
Assign an Analog Terminal Station No. to the 
required LEN.(1) LEN (0000-0511)
(2) FX-FXXXX: Analog Terminal Station 
No.
Note:The Analog Terminal Station No.
must be assigned to the LEN of right
side LT slot to the LT slot for DLC.
Example: When the DLC card is
mounted in the LT01 slot and LT03
slot.
Assignment...

ND-45670 (E) CHAPTER 2
Page 29
Revision 2.0
ANALOG PORT ADAPTER (1200 Series Enhancement)
DESCRIPTION DATA
Assign a key for Analog Terminal. • YY=00
(1) Analog Terminal Station No. + + Key 
No.
(2) X-XXXX: Analog Terminal Station No. 
assigned by CM10.
Assign an Analog Terminal Station No. as 
Prime Line.(1) X-XXXX: Analog Terminal Station No.
(2) X-XXXX: Analog Terminal Station No.
Provide the Analog Port Adapter to the 
required station.• YY=34
(1) X-XXXX: Analog Terminal Station No.
(2) 0: To be...

CHAPTER 2 ND-45670 (E)
Pag e 3 0
Revision 2.0
ANNOUNCEMENT SERVICE
PROGRAMMING
DESCRIPTION DATA
Specify the Multi-Connection of the Digital 
Announcement Trunk (PN-2DATA) on 
Announcement Service. (1) 124 
(2) 0/1 : Available/Not Available (Single 
Connection)
Assign a Digital Announcement Trunk Circuit 
No. to the required LEN.
Note:The Digital Announcement Trunk
Circuit No. must be assigned to the
first LEN (Level 0) and/or the third
LEN (Level 2) of each LT slot.(1) LEN (0000-0511) 
(2) EB000-EB127:...

ND-45670 (E) CHAPTER 2
Page 31
Revision 2.0
ANNOUNCEMENT SERVICE
Note 1:A maximum of five different announcements can be accessed. There is a limit of 10 Digital Announcement
Trunk Circuit for each of the five different announcements. When recording an announcement, each Digital
Announcement Trunk Circuit must be recorded individually.
Note 2:Each time a station is connected to a Digital Announcement Trunk Circuit, the message will be repeated
three times. The station will then be disconnected.
Note...

CHAPTER 2 ND-45670 (E)
Pag e 3 2
Revision 2.0
ANNOUNCEMENT SERVICE
To provide a voice message when an incoming C.O. line/Tie line call has been transferred and encounters a busy or
no answer condition:
DESCRIPTION DATA
Assign a Digital Announcement Trunk Circuit 
No. to the required LEN.
Note:The Digital Announcement Trunk
Circuit No. must be assigned to the
first LEN (Level 0) and/or the third
LEN (Level 2) of each LT slot.(1) LEN (0000-0511) 
(2) EB000-EB127: Digital Announcement 
Trunk Circuit No....

ND-45670 (E) CHAPTER 2
Page 33
Revision 2.0
ANNOUNCEMENT SERVICE
Note 5:Announcement Service can be used to provide a voice message when an incoming C.O. line/Tie line call
has been transferred and encounters a busy or no answer condition. After the voice message is given, nor-
mal call processing continues. 
-This application can be programmed on a tenant basis.
- Only one (1) message of up to 60 seconds can be recorded on an individual Digital Announcement Trunk
Circuit. 
- In this application, a...