NEC Neax 2400 Ipx Wireless System Manual
Here you can view all the pages of manual NEC Neax 2400 Ipx Wireless System Manual. The NEC manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 151
CHAPTER 4 NDA-24301 Pag e 1 34 Revision 1.0 OFFICE DATA ASSIGNMENT Table 4-1 Roaming Class Data List (Continued) D Channel Route Data CDN DATA CDN DATA CDN DATA 001 OSGS 0 042 TRSC 0 083 CST 4 002 ONSG 2 043 BT 0 084 CSEG 0 003 ISGS 0 044 PRV 0 085 CSEU 0 004 INSG 2 045 A/D 1 086 CSEL 0 005 TF 3 046 CW 1 087 CMP 0 006 TCL 4 047 TPQ 0 088 TALK 0 007 L/T 1 048 BL 0 089 FOT 0 008 RLP 2 049 TRKS 0 090 RST 0 009 TQ 0 050 DPLY 1 091 TOCI 0 010 SMDR 0 051 ACD 0 092 TOCD 0 011 TD 0 052 2W/4W 0 093 ODGD 0 012 DR...
Page 152
NDA-24301 CHAPTER 4 Page 135 Revision 1.0 TTC Q.931A PROTOCOL TIE LINE WITH PCS ROAMING 1. GENERAL DESCRIPTION When the Built-in PCS system is connected to another Built-in PCS system, TTC Q.931a protocol Tie Line can be used as an interface for call origination and termination with PCS Roaming feature. Note:From software Series 7400 or later, a PS can move to any node of the Fusion network that has a different SYS-ID. Refer to PCS Roaming (Release 8 software enhancement). PSBuilt-in PCS (Visitor PBX)...
Page 153
CHAPTER 4 NDA-24301 Pag e 1 36 Revision 1.0 2. OPERATING PROCEDURE No manual operation is required. 3. SERVICE CONDITIONS Table 4-2 through 4-10 show functions available for TTC Q.931a protocol Tie Line with PCS Roaming feature. OG Call Features : Table 4-2 IC Call Features : Table 4-3 Station Service Features : Table 4-4 Other Service Features : Ta b l e 4 - 5 Attendant Console Service Features : Table 4-6 Network Service Features : Ta b l e 4 - 7 Operation/Maintenance Service Features :...
Page 154
NDA-24301 CHAPTER 4 Page 137 Revision 1.0 Note:When a PS has roamed to a Visitor PBX, RSC and SFC for Visitor PS assigned at the Visitor PBX are used for OG call restriction. Table 4-2 List of OG Call Features for Q.931a ×: Available : Conditionally available –: Not available/Not used NAME OF SERVICE FEATURESVisitor PBX (Standalone) REMARKS From PS To PS ALTERNATE ROUTING/ROUTE ADVANCE×– SPEED CALLING-STATION/GROUP ––To be substituted for the memory dial of PS SPEED CALLING-SYSTEM – – TOLL CALL...
Page 155
CHAPTER 4 NDA-24301 Pag e 1 38 Revision 1.0 Note 1:DID 1) When the PS is out of zone, the calling party from the C.O. line still hears Ring Back Tone (RBT). Automatic Announcement - Called PS Out of Zone feature set on the PS is not available. 2) Even if the PS becomes Out of Zone while connected with the calling party from the C.O. line, Automatic Announcement - Disconnected PS Out of Zone is not available. The calling party hears Reorder Tone (ROT). 3) When a C.O. line incoming call is transferred to...
Page 156
NDA-24301 CHAPTER 4 Page 139 Revision 1.0 Table 4-4 List of Station Service Features for Q.931a ×: Available : Conditionally available –: Not available/Not used NAME OF SERVICE FEATURESVisitor PBX (Standalone) REMARKS From PS To PS OFF HOOK ALARM – – 8-PARTY CONFERENCE – – C.F.-A-OUTSIDE× Note 1 C.F.-D-OUTSIDE×Note 1, Note 2 C.F.-B-OUTSIDE×Note 1, Note 3 C.F.-A×Note 1 C.F.-A CANCEL BY A ROUTINE DIAGNOSIS–– CALL TRANSFER - ALL CALLS×× Note 4 EMERGENCY CALL – – DAY/NIGHT CLASS OF SERVICE – Only RSC is...
Page 157
CHAPTER 4 NDA-24301 Pag e 1 40 Revision 1.0 Note 1:Conditions for Call Forwarding features are shown in the table below. Note 2:C.F.-D-Outside is not applicable by CALL TRANSFER-ALL CALLS. Note 3:When the Attendant calls a PS which has roamed to a visitor PBX and set C.F.-B-Outside, the C.F.-B- Outside does not work and the Attendant hears Busy Tone (BT). Note 4:Recall service can be activated to the transferred station when the PS, with C.F.-PS INCOMING CALL INCOMPLETE in service, moves Out of Zone,...
Page 158
NDA-24301 CHAPTER 4 Page 141 Revision 1.0 Note 5:Call Waiting 1) This service is valid in a two-party call when a call is terminated – from station-to-station, to PS, to Central Office line, or to Tie line call – but invalid when other services using switch hook flash are executed to the PS or when the PS is connected to the Attendant Console. 2) To set CALL WAITING, it is necessary that the Service Restriction Class data (ASFC) be assigned in the office data assignment. Call Waiting service is provided...
Page 159
CHAPTER 4 NDA-24301 Pag e 1 42 Revision 1.0 c.When a PS which has roamed to a Visitor PBX and a station in the Home PBX are connected, Call Waiting to the station is available. Note 6:Step Call 1) Tie line Step Call is not available from PS. 2) If Visitor PS is busy, Step Call is not available. Note 7:This feature depends on the RSC for the Visitor PS number assigned at the visitor PBX. Therefore, Visitor PS cannot have its own RSC. Note 8:When a PS has roamed to the Visitor PBX, all calls to the PS are...
Page 160
NDA-24301 CHAPTER 4 Page 143 Revision 1.0 Note:When a PS which has roamed to the Visitor PBX places a call and is connected to a Dterm, the Dterm cannot set Call Park. Table 4-5 List of Other Service Features for Q.931a ×: Available : Conditionally available –: Not available/Not used NAME OF SERVICE FEATURESVisitor PBX (Standalone) REMARKS From PS To PS AUTHORIZATION CODE – – ACCOUNT CODE – – C.F.-INTERCEPT/ANNOUNCEMENT×– CALL PARK – – Note DISTRIBUTION ACCESS UNIT (DAU) – – DSS CONSOLE – –...