NEC Neax 2400 Ipx Wireless System Manual

CHAPTER 4 NDA-24301
Pag e 1 24
Revision 1.0
OFFICE DATA ASSIGNMENT
4. PROGRAMMING
1) ASYD (Assignment of System Data)
SYS1
SI 78
b5: 1 (Name Display In Service)
SI 79
b6: 0 (OAI In Service)
SI 241
b1: The number of digits displayed in NAME DISPLAY service
0/1: 8 digits/16 digits
2) ARTD (Assignment of Route Class Data)
Assign route class data for the CCIS route.
CDN 43 (BT)=1
CDN 50 (DPLY)=1
CDN 98 (CI)=0/1 with ISDN
CDN 112 (IND)=1
3) ANDD (Assignment of Name Display Data)
Assign user’s information to...

NDA-24301 CHAPTER 4
Page 125
Revision 1.0
OFFICE DATA ASSIGNMENT
NUMBER SHARING
1. GENERAL DESCRIPTION
This feature allows the Dterm user to use a PS as a sub station. In this feature, the Dterm and PS are referred as
Main Station and Sub Station, respectively. The main functions of this feature are as follows:
1. Call Forwarding-All Calls to PS
When the D
term (Main Station) user presses the feature key or dials the access code, Call Forwarding-All
Calls to PS (Sub Station) is set or canceled. This...

CHAPTER 4 NDA-24301
Pag e 1 26
Revision 1.0
OFFICE DATA ASSIGNMENT
3. SERVICE CONDITIONS
1. This feature is available for Series 7300 or later software.
2. Telephone Number must be assigned to both Main and Sub Stations.
3. The PS cannot be assigned as Main Station.
4. Any combination of Main Station and Sub Station is available in a Fusion network.
5. The access code
 for an outgoing call cannot be assigned as a Sub Station number.
6. Dialing the access code for this feature is available only for Main...

NDA-24301 CHAPTER 4
Page 127
Revision 1.0
OFFICE DATA ASSIGNMENT
5. PROGRAMMING
1) ASYD (System Data)
SYS1
INDEX 513 (LDM Memory Usage): Assign data “1” for the corresponding memory 
block.
INDEX 514 (NDM Memory Usage): Assign data “1” for the corresponding memory 
block.
2) ANSDN/ANSDL (Number Sharing Data)
M-UGN: Main User Group Number
S-UGN: Sub User Group Number
M-TELN: Main Telephone Number (Max. 16 digits)
S-TELN: Sub Telephone Number (Max. 16 digits)
OD: Output External Equipment 
Note 1
0: Only...

CHAPTER 4 NDA-24301
Pag e 1 28
Revision 1.0
OFFICE DATA ASSIGNMENT
PCS ROAMING
1. GENERAL DESCRIPTION
This feature allows a PS to move to another PBX which has a different SYS-ID via Q. 931a or IS-11572
connection. The PBX which PS can roam from/to is assigned Network Number (NWN). Network Number must
be assigned as a unique number for each network.
2. OPERATING PROCEDURE
1. PS moves to another PBX which has a different SYS-ID.
2. PS registers its location automatically at Visitor PBX to the Home PBX via...

NDA-24301 CHAPTER 4
Page 129
Revision 1.0
OFFICE DATA ASSIGNMENT
11. Roaming PS cannot use OAI features.
< Series 7400 (Release 8) software enhancement >
From Series 7400 or later software, a PS can move to any node of the Fusion network that has a different SYS-
ID, on condition that a Q.931a/IS-11572 Tie Line is established between the different SYS-ID Fusion networks.
Figure 4-1 depicts this software enhancement, in comparison with the former software capability.
Figure 4-1  PS Roaming in Release 8...

CHAPTER 4 NDA-24301
Pag e 1 30
Revision 1.0
OFFICE DATA ASSIGNMENT
4. PROGRAMMING
 Basic Data Assignment
ARTD Assignment of Route Class Data
 Assign Q.931 Route Class D Channel and B Channel. (Refer to Table.)
ATRK Assignment of Trunk Data
MBTK Make Busy Trunk Data
 Make Idle the B channels.
ANPD Assignment of Numbering Plan Data
 Assign the first digits of the Visiting PS. Also, include the Numbering Plan of the Self-
PBX Office Code and the Office Code of the destination PBX.
ASPA Assignment of...

NDA-24301 CHAPTER 4
Page 131
Revision 1.0
OFFICE DATA ASSIGNMENT
 CS/ZT Settings - Office DataARSC Asignment Route Restriction Service Class
 Allow for Icoming and Outgoing Route Restrictions
ARRC Assignment of Alternative Route Restrictions
ICRT: B Chn/D Chn  OGRT: 31 ARI: A/D-RES: 1
OGRT: 31 ICRT: B Chn/D Chn ARI: A/D-RES: 1
ADPC Assignment of Determinate Point Code
RT:  B Chn PC:  Destination Office Code
RT:  D Chn PC:  Destination Office Code
ACSC Assignment of CSC Data
 Assign CSC Data to D...

CHAPTER 4 NDA-24301
Pag e 1 32
Revision 1.0
OFFICE DATA ASSIGNMENT
 PS Office Data Setting
Note:A closed Numbering Plan shall be used when assigning the Visitor PS. The Logical Number of the Visiting
PS must correspond to the Logical Numbering Plan of the Home PBX.
 Set PS Roaming / Visitor OfficeAPSD Assignment of PS Data
TN: 1 PSSTN: PS Physical Station Number
KIND: 6 RSC: 1
SFC: 1 PS ID: ID Number Assigned (9 Digits Maximum)
TYPE: 2 (Fixed) PSNO: XXXYYYY 
Note 
NWN: Same as Set in ACSEL Command...

NDA-24301 CHAPTER 4
Page 133
Revision 1.0
OFFICE DATA ASSIGNMENT
Table 4-1  Roaming Class Data List
B Channel Route Data
CDN DATA CDN DATA CDN DATA
001 OSGS 0 042 TRSC 0 083 CST 4
002 ONSG 2 043 BT 0 084 CSEG 0
003 ISGS 0 044 PRV 0 085 CSEU 0
004 INSG 2 045 A/D 1 086 CSEL 0
005 TF 3 046 CW 1 087 CMP 0
006 TCL 4 047 TPQ 0 088 TALK 0
007 L/T 1 048 BL 0 089 FOT 0
008 RLP 2 049 TRKS 0 090 RST 0
009 TQ 0 050 DPLY 1 091 TOCI 0
010 SMDR 0 051 ACD 0 092 TOCD 0
011 TD 0 052 2W/4W 0 093 ODGD 0
012 DR 0 053 FAAT 0...