NEC Neax 2400 Ipx Hotel Features And Specifications

NEAX2400 IPX Hotel Features and Specifications
NDA-24310, Issue 1Page 79
Group Restriction G-21
G-21Group Restriction
General Description
This feature allows the Guest stations in a group to be restricted per the following conditions.
1. GROUP RESTRICTION is categorized as follows:
Outgoing Call Restriction Guest stations in a group are restricted from originating a call.
Outgoing Station Call Restriction Guest stations in a group are restricted from making a call to
stations in the other groups....

NEAX2400 IPX Hotel Features and SpecificationsPage 80NDA-24310, Issue 1
G-21 Group Restriction
Operating Procedure (cont’d)
5. Press theENTkey. “OK” is displayed.
To cancel Group to Group Connection from the Console
1. Press theGRRkey.The GRRlamp lights and the console displays the title.
2. Enter “8”. The console displays the title according to the select number.
3. Enter the group number A.
4. Enter the group number B.
5. Press theENTkey. “OK” is displayed.
To operate from the PMS terminal, follow the...

NEAX2400 IPX Hotel Features and Specifications
NDA-24310, Issue 1Page 81
Group Restriction G-21
Service Conditions (cont’d)
8. When both restrictions of Outgoing Station Call Restriction and Outgoing C.O. Call Restriction are set,
Outgoing Call Restriction is established. When Incoming Station Call Restriction and Incoming C.O. Call
Restriction are set, Incoming Call Restriction is established. Setting both restrictions of Outgoing Call
Restriction and Incoming Call Restriction is the same as setting...

NEAX2400 IPX Hotel Features and SpecificationsPage 82NDA-24310, Issue 1
G-21 Group Restriction
Service Conditions (cont’d)
16. The restriction status is listed in order of the entered group numbers.
17. When the group number which is not assigned Group to Group Connection is ordered to be listed,
“GROUP NOT ASSIGN” is printed. If any groups are not allowed Group to Group Connection, “ALLOW
GRP NOTHING” will print.
Interactions
1. GROUP RESTRICTION is not available when DO NOT DISTURB [D-11D] or...

NEAX2400 IPX Hotel Features and Specifications
NDA-24310, Issue 1Page 83
GuestStation-DtermG-24
G-24Guest Station - Dterm
General Description
This feature allows the Dtermto be used as a Guest station in the Hotel System. Various useful features such as
HANDS FREE ANSWER BACK - Dterm[H-4D] and MULTIPLE LINE OPERATION - Dterm[M-20D] have
become available for Guest room stations.
In addition to time display,
The DtermLCD is used for the following Hotel services:
AUTOMATIC WAKE-UP [A-10]
CALLING STATION...

NEAX2400 IPX Hotel Features and SpecificationsPage 84NDA-24310, Issue 1
H-8 House Phone/Hot Line
H-8House Phone/Hot Line
General Description
This feature allows selected stations to reach the Attendant (house phone) or a predesignated station (hot line) by
going off-hook. House phones are normally provided in a hotel lobby or restaurant.
Operating Procedure
1. The HOUSE PHONE/HOT LINE user goes off-hook. The Attendant (or other predesignated station) is
called.
2. The attendant answers via...

NEAX2400 IPX Hotel Features and Specifications
NDA-24310, Issue 1Page 85
Hotel Feature Transparency Over CCIS H-22
H-22Hotel Feature Transparency Over CCIS
General Description
This feature allows a Hotel System to use Common Channel Interoffice Signaling (CCIS), which conforms to the
CCITT Signaling System No. 7. Some of the hospitality services may be activated over different offices via the
CCIS lines.
Operating Procedure
To originate a CCIS call
1. Dial the office code and the station number from the...

NEAX2400 IPX Hotel Features and SpecificationsPage 86NDA-24310, Issue 1
H-22 Hotel Feature Transparency Over CCIS
Operating Procedure (cont’d)
Figure 12 Call Termination on Attendant Console, Desk Console, and Special Administration Dterm
To set and cancel service features from the Console
1. Press a Feature Key on the Hotel Console.
2. Enter an access code for a distant office, then enter a station number.
3. Enter other information, such as time, if required. When the process ends normally, the Guest...

NEAX2400 IPX Hotel Features and Specifications
NDA-24310, Issue 1Page 87
Hotel Feature Transparency Over CCIS H-22
Service Conditions (cont’d)
5. When a Guest station is enabled to set its own wake-up calls and a log of these settings is desired, then a
hotel printer must be located at the site of the Guest station PBX.
6. The central office lines are accommodated in each office. When placing the central office call, the line
accommodated in the same office is used.
7. When a call terminates from the...

NEAX2400 IPX Hotel Features and SpecificationsPage 88NDA-24310, Issue 1
H-22 Hotel Feature Transparency Over CCIS
✰A-73 Automatic Multiple Attendant Recall —
✰
A-74Answering Camp-On/Call Hold Calls by Switch Hook
Flash—
✰A-75 Automated Guest Station Voice Mail Retrieval —
B-26 Busy Status Display - Hotel Attendant X
C-19 Calendar Display —
C-23 Check-In/Check-Out X*Available from Console / D
term
with Hospitality Functions
C-32 Calling Station Number Display X
✰C-62 Consecutive Speed Calling - System X...