NEC Neax 2400 Ipx Hotel Features And Specifications

NEAX2400 IPX Hotel Features and Specifications
NDA-24310, Issue 1Page 39
Check-In/Checkout C-23
C-23Check-In/Checkout
General Description
This service manages Vacant/Occupied status of each Guest room, and automatically restrict/cancel the restriction
for such services as C.O. outgoing call, Automatic Wake-Up, etc. according to the present status of each Guest room.
When CHECK-IN/CHECKOUT service is activated from the PMS terminal, the Console, or the Front Desk
Terminal, the following operations occur:...

NEAX2400 IPX Hotel Features and SpecificationsPage 40NDA-24310, Issue 1
C-32 Calling Station Number Display
C-32Calling Station Number Display
General Description
This feature provides hospitality service stations (restaurant, valet, room service, etc.) and Guest stations with an
LCD display of incoming calling number (Guest, Administration, OG, or IC trunk). This display flashes while the
call is ringing, then appears steadily when the call is answered. D
termmay be used for service stations.
Operating...

NEAX2400 IPX Hotel Features and Specifications
NDA-24310, Issue 1Page 41
Calling Station Number Display C-32
Operating Procedure (cont’d)
b.) Lift handset and answer the call. The display stops flashing.
Service Conditions
1. When a call terminates to a line other than the prime line, the LCD displays the incoming station as
determined by LINE PRESELECTION - Dterm[L-9D].
2. LINE PRESELECTION - D
term[L-9D] is governed by a timer. After the timer times out, the display
returns to TIME DISPLAY -...

NEAX2400 IPX Hotel Features and SpecificationsPage 42NDA-24310, Issue 1
C-71 Called Number Display - Hotel Attendant Console
C-71Called Number Display - Hotel Attendant
Console
General Description
If a call is transferred to the Console as a result of the following features:
DO NOT DISTURB [D-11]
CALL FORWARDING - ALL CALLS [C-5]
CALL FORWARDING - BUSY LINE [C-2]
CALL FORWARDING - DONT ANSWER [C-3]
CALL FORWARDING - INTERCEPT/ANNOUNCEMENT [C-25]
Information pertaining to that station is displayed on the...

NEAX2400 IPX Hotel Features and Specifications
NDA-24310, Issue 1Page 43
Called Number Display - Hotel Attendant Console C-71
Service Conditions (cont’d)
2. If the Attendant presses theSRCkey while the called station number is displayed, the display changes to
the number of the calling party. The called station number cannot be displayed again.
3. While the called station number is displayed, the Attendant can transfer the call to a desired station by
keying the destination number on the keypad. In this...

NEAX2400 IPX Hotel Features and SpecificationsPage 44NDA-24310, Issue 1
C-72 Connecting Room Service
C-72Connecting Room Service
General Description
This feature allows the PMS to connect two rooms on a temporary basis to act as one room. One room will act as
the primary room and the other to act as a secondary room. If suite rooms are to be connected, the primary station
in the suite room arrangement is used for connecting room purposes.
Operating Procedure
CONNECTING ROOM SERVICE assignment is made...

NEAX2400 IPX Hotel Features and Specifications
NDA-24310, Issue 1Page 45
Connecting Room Service C-72
Service Conditions (cont’d)
13. When the Console dials the primary station, the DSS keys and lamps are used in the operation. The status
of the connecting room phones appear on the DSS lamps. Ringing is generated at the connecting room
phones when the first DSS key is pressed or the START key is pressed. If a secondary phone DSS key is
pressed, only the corresponding secondary phone will ring. The DSS...

NEAX2400 IPX Hotel Features and SpecificationsPage 46NDA-24310, Issue 1
C-147 Call Information Display
C-147Call Information Display
General Description
This feature allows the following information to be displayed on the Guest room DtermsLCD.Dtermmay be used
for Guest stations.
Calling/Called Station
AUTOMATIC WAKE-UP - D
term[A-10D]
ALERT SERVICE [A-57]
DO NOT DISTURB - D
term[D-11D]
DIRECT DATA ENTRY - STATION [D-107]
MESSAGE WAITING [M-6]
MAID STATUS [M-22]
ROOM CUTOFF [R-9]
2ND WAKE-UP CALL - SAME...

NEAX2400 IPX Hotel Features and Specifications
NDA-24310, Issue 1Page 47
Call Information Display C-147
Operating Procedure (cont’d)
e.) During a call through Tie line in progress:
-OR-
2. For other display services, see each service feature description.
Service Conditions
1. When the Guest name two-line display is provided by the system parameters, the time display (lower line)
disappears during a call.
2. When originating a call using the ISDN terminal, the charging information is not displayed.HH:MM...

NEAX2400 IPX Hotel Features and SpecificationsPage 48NDA-24310, Issue 1
D-11 Do Not Disturb
D-11Do Not Disturb
General Description
This feature allows the Console, PMS terminal, Front Desk Terminal, Special Administration Station, or Guest
Station to temporarily place individual stations into a mode that blocks incoming calls. Outgoing calls may still be
placed from stations in DO NOT DISTURB (DD) mode.
Operating Procedure
To set DO NOT DISTURB from the Console or Front Desk Terminal
1. Press theDD(set)...