NEC Neax 2400 Ipx Hotel Features And Specifications

NEAX2400 IPX Hotel Features and Specifications
NDA-24310, Issue 1Page 9
Description of Service Features
Description of Service Features
Hotel Service Features
This section explains each Hotel service feature by the following items:
General Description
Operating Procedure
Service Conditions
General Description
This item explains a general description of the service feature.
Operating Procedure
This item explains the procedure to be followed for receiving a specific service feature concerned. When testing...

NEAX2400 IPX Hotel Features and SpecificationsPage 10NDA-24310, Issue 1
This page is for your notes. 

NEAX2400 IPX Hotel Features and Specifications
NDA-24310, Issue 1Page 11
Automatic Wake-Up A-10
A-10Automatic Wake-Up
General Description
This service feature allows the NEAX2400 IPX to be programmed to automatically call Guest rooms at specified
times. Upon answering, the Guest is connected to a recorded announcement or music source. A printout of
unanswered or blocked wake-up attempts for Guest rooms is provided at the Hotel printer. This feature can be
activated from the Guest room stations,...

NEAX2400 IPX Hotel Features and SpecificationsPage 12NDA-24310, Issue 1
A-10 Automatic Wake-Up
Operating Procedure (cont’d)
b.) Dial SET WAKE-UP code. Hear special dial tone.
c.) Dial desired time of AUTOMATIC WAKE-UP, then dial the Guest room number. Hear service
set tone.
d.) Hang up.
To cancel AUTOMATIC WAKE-UP from a Special Administration Station
1. Lift the handset. Receive dial tone.
2. Dial CANCEL WAKE-UP code and Guest room number. Hear service set tone.
3. Hang up.
To set AUTOMATIC WAKE-UP from...

NEAX2400 IPX Hotel Features and Specifications
NDA-24310, Issue 1Page 13
Automatic Wake-Up A-10
Service Conditions
1. From the Front Desk Terminal or Console, set AUTOMATIC WAKE-UP using either 24-hour time, or
12-hour time. When using 12-hour time, time is entered by dialing a special code, which includes either a
# or * before entering the time to indicate PM. For example, when dialing the desired time, dial #1030 for
10:30 PM. The choice of # or * is assigned in system data.
2. The maximum number of...

NEAX2400 IPX Hotel Features and SpecificationsPage 14NDA-24310, Issue 1
A-10 Automatic Wake-Up
Service Conditions (cont’d)
Note:Any Administration Station that is assigned as a Special Administration Terminal may NOT set WAKE-UP
for itself or for any station other than a Guest station.
11. If PMS Language Selection is used, AUTOMATIC WAKE-UP announcements can be provided
according to a Guests language.
12. If all announcement trunks are busy, music will be provided for AUTOMATIC WAKE-UP. Music is...

NEAX2400 IPX Hotel Features and Specifications
NDA-24310, Issue 1Page 15
Automatic Wake-Up DtermA-10D
A-10DAutomatic Wake-Up Dterm
General Description
This service feature allows the NEAX2400 IPX to be programmed to automatically call Guest rooms at specified
times. Upon answering, the Guest is connected to a recorded announcement or music source. A printout of
unanswered, blocked, or busy wake-up attempts for Guest rooms is provided at the Hotel printer. This feature can
be activated from the Guest room...

NEAX2400 IPX Hotel Features and SpecificationsPage 16NDA-24310, Issue 1
A-10D Automatic Wake-Up Dterm
Operating Procedure (cont’d)
To cancel AUTOMATIC WAKE-UP from a Guest Room Dterm(24-hour time only)
1. With separate set and cancel codes:
a.) Lift the handset or press theSPEAKERkey. Receive dial tone.
b.) Dial CANCEL AUTOMATIC WAKE-UP code. Hear service set tone. The LCD displays:
c.) Hang up.
2. When set and cancel codes are the same:
a.) Lift the handset or press theSPEAKERkey. Receive dial tone.
b.)...

NEAX2400 IPX Hotel Features and Specifications
NDA-24310, Issue 1Page 17
Automatic Wake-Up DtermA-10D
Service Conditions (cont’d)
Note:Wake-Up Time set from a station will be rounded to the nearest multiple of five.
6. If Wake-Up announcement is used, this feature requires one of the following hardware alternatives:
a.) Central Office Trunk (COT) or 2W E&M trunk and an announcement machine.
b.) Digital Announcement Trunk (DAT).
7. This feature provides three additional AUTOMATIC WAKE-UP attempts at fixed...

NEAX2400 IPX Hotel Features and SpecificationsPage 18NDA-24310, Issue 1
A-10D Automatic Wake-Up Dterm
Service Conditions (cont’d)
18. It is possible to use the same access code for both AUTOMATIC WAKE-UP set and cancel. For example,
*1 may be assigned the AUTOMATIC WAKE-UP set and cancel access code. The NEAX2400 IPX will
recognize *1 and wait for the next digit. If 0, 1, or 2 is dialed, then a time is being set. If the 3 is dialed,
this is an AUTOMATIC WAKE-UP cancel. For example:
*1 0800 8:00 AM...