NEC Neax 2400 Ipx Hotel Features And Specifications

NEAX2400 IPX Hotel Features and Specifications
NDA-24310, Issue 1Page 29
Automatic Wake-up - Hotel Attendant A-58
A-58Automatic Wake-up - Hotel Attendant
General Description
When AUTOMATIC WAKE-UP [A-10] is set to the Guest station with VIP status and it is time for the Guest to be
awakened, the call will ring the Console. When answered, the call is extended to the Guest. The Guest will be greeted
by the attendant rather than a recorded announcement.
Operating Procedure
To operate from the Console
1. On...

NEAX2400 IPX Hotel Features and SpecificationsPage 30NDA-24310, Issue 1
A-58 Automatic Wake-up - Hotel Attendant
Service Conditions (cont’d)
8. The console displays “ATC”, and no other result is sent to PMS when the Attendant answers the call.
9. Setting and cancelling WAKE-UP services are restricted from administration stations, the Console, the
PMS Terminal, a Front Desk Terminal, or predetermined Special Administration Station if the feature was
set by the Guest room station. These restrictions are...

NEAX2400 IPX Hotel Features and Specifications
NDA-24310, Issue 1Page 31
Automatic Multiple Attendant Recall A-73
A-73Automatic Multiple Attendant Recall
General Description
This feature is a variation of the Automatic Recall feature of the NEAX2400 IPX. When the Attendant answers an
incoming trunk call, dials the station, and presses the RELEASE key, the automatic-recall timer is activated. The
dialed station rings, but if it is unanswered within the customer-defined recall time, the call is directed to...

NEAX2400 IPX Hotel Features and SpecificationsPage 32NDA-24310, Issue 1
A-73 Automatic Multiple Attendant Recall
Service Conditions (cont’d)
11. The “Called Number” displayed is the number of the station that is ringing when the attendant presses the
RELEASEkey. If the call has been forwarded, this number is not the same as the dialed number.
12. Automatic Multiple Attendant Recall is not available for calls transferred to stations over CCIS. 

NEAX2400 IPX Hotel Features and Specifications
NDA-24310, Issue 1Page 33
Answering Camp-On/Call Hold Calls By Switchhook Flash A-74
A-74Answering Camp-On/Call Hold Calls By
Switchhook Flash
General Description
This feature allows a busy Guest station to answer a CAMP-ON or CALL HOLD call automatically by using switch
hook flash.
Operating Procedure
To answer a CAMP-ON call
1. The Attendant executes ATTENDANT CAMP-ON WITH TONE INDICATION [A-1]. A busy Guest
station user hears a camp-on tone indication.
2....

NEAX2400 IPX Hotel Features and SpecificationsPage 34NDA-24310, Issue 1
A-74 Answering Camp-On/Call Hold Calls By Switchhook Flash
Service Conditions (cont’d)
4. The operating procedure for CALL HOLD - Dterm[C-6D] using FLASH BUTTON - Dterm[F-3D] is
replaced by this feature when enabled in system data.
5. The function of the TRANSFER key on the D
termdoes not change when this feature is enabled.
6. The limitations for ATTENDANT CAMP-ON WITH TONE INDICATION [A-1] and for CALL HOLD
[C-6] apply to this...

NEAX2400 IPX Hotel Features and Specifications
NDA-24310, Issue 1Page 35
Automated Guest Station Voice Mail Retrieval A-75
A-75Automated Guest Station Voice Mail Retrieval
General Description
AUTOMATED GUEST STATION VOICE MAIL RETRIEVAL (VMR) is a feature that makes it easy for Guest
stations to retrieve voice mail. Guest stations dial a Voice Mail Retrieval (VMR) access code and a station password
for immediate message retrieval. The feature is customer-programmable to allow it to conform to the needs...

NEAX2400 IPX Hotel Features and SpecificationsPage 36NDA-24310, Issue 1
B-26 Busy Status - Hotel Attendant
B-26Busy Status - Hotel Attendant
General Description
When the Hotel Attendant calls a Guest station that is busy, BUSY STATUS DISPLAY - HOTEL ATTENDANT
causes the current status of the called Guest station to display in detail on the console LCD.
The following figures show the LCD displays for each status.
1. When the called station receives dial tone (off-hook status):
2. When the called station...

NEAX2400 IPX Hotel Features and Specifications
NDA-24310, Issue 1Page 37
Busy Status - Hotel Attendant B-26
General Description (cont’d)
9. When the called station is engaged in a CO line call and when Central Office code is not assigned:
10. When the called station is engaged in a call with a Hotel Attendant, and specified Attendant Number (1 to
6 digits) is assigned:
11. When the called station is engaged in call with a Hotel Attendant, and Specified Attendant Number is not
assigned:
12. For other...

NEAX2400 IPX Hotel Features and SpecificationsPage 38NDA-24310, Issue 1
C-19 Calendar Display
C-19Calendar Display
General Description
A digital display indicating month, day, hour, and minute is provided on the Console.
Operating Procedure
Hour and minute information is constantly displayed. Month and day information is displayed only while key
operations pertaining to hospitality services are not being performed.
Service Conditions
1. Hour and minute display - (constant).
Note:The Attendant Console...