NEC Neax 2400 Ipx Hotel Features And Specifications

NEAX2400 IPX Hotel Features and Specifications
NDA-24310, Issue 1Page 99
Off-hook Alarm O-6
O-6Off-hook Alarm
General Description
The OFF-HOOK ALARM feature is intended for emergency alert situations. A station user who remains off-hook
without dialing for longer than 30 seconds is automatically routed to theEMGkey on the Console or to a
predesignated station.
Operating Procedure
1. Station user goes off hook. After 30 seconds, a call is routed to theEMGkey on the console or to a
predetermined station....

NEAX2400 IPX Hotel Features and SpecificationsPage 100NDA-24310, Issue 1
O-9 Overtime Call
O-9Overtime Call
General Description
The OVERTIME CALL feature permits the NEAX2400 IPX to measure the length of all outgoing calls, and to print
a message on the hotel printer or alert the Console that the call has exceeded a predetermined time.
Operating Procedure
If the hotel printer is to receive this information, no manual operation is required.
To operate from the Console
1. The OT lamp flashes and an...

NEAX2400 IPX Hotel Features and Specifications
NDA-24310, Issue 1Page 101
Printer Control - Hotel Attendant Console P-8
P-8Printer Control - Hotel Attendant Console
General Description
A printer should be connected to the NEAX2400 IPX to provide AUDIT REPORTS [A-26], CHECK-IN/
CHECKOUT [C-23], OVERTIME CALL [O-9], and AUTOMATIC WAKE-UP [A-10] set times, and results of
Wake-Up calls. In the event that PMS is provided and then temporarily fails, PMS messages will be sent to this
printer.
Printer Service...

NEAX2400 IPX Hotel Features and SpecificationsPage 102NDA-24310, Issue 1
P-27 PMS Interface - BISYNC
P-27PMS Interface - BISYNC
General Description
The PMS INTERFACE service feature provides an interface to the Property Management System (PMS) computer
using the standard IBM®BISYNC (Binary Synchronous Communication) protocol. This interface allows a PMS
computer to accommodate both front and back office hospitality management features.
Note:IBM®is a registered trademark of International Business...

NEAX2400 IPX Hotel Features and Specifications
NDA-24310, Issue 1Page 103
PMS Interface P-29
P-29PMS Interface
General Description
The PMS INTERFACE provides a data link between the NEAX2400 IPX and the customers Property Management
System (PMS) computer. This communications link enables the PMS-related hospitality management functions.
Major functions and their communication interactions are indicated below:
AUTOMATIC WAKE-UP [A-10] IPXPMS
AUTOMATIC MESSAGE WAITING LAMP OFF [A-48] IPXPMS...

NEAX2400 IPX Hotel Features and SpecificationsPage 104NDA-24310, Issue 1
P-29 PMS Interface
Service Conditions (cont’d)
3. Message format:
Note:The Block Check Code is for the Longitudinal Redundancy Check.
On detecting STX, the computation starts (STX is excluded).
On detecting ETX, the computation ends (ETX is included).
4. Data format and contents of TEXT are in conformity with Bell System Voice Communications Technical
Reference Publication No. 42707, PMS Data Link Interface Specifications. (Details...

NEAX2400 IPX Hotel Features and Specifications
NDA-24310, Issue 1Page 105
Paging Console P-34
P-34Paging Console
General Description
The PAGING CONSOLE feature allows a Console operator to transfer an incoming call to a PAGING CONSOLE
when the Guest is not in his or her room. The PAGING CONSOLE operator pages the Guest through the hotel public
address system, requesting him or her to dial a special number from a nearby telephone. When the Guest calls, the
PAGING CONSOLE operator connects the Guest to the...

NEAX2400 IPX Hotel Features and SpecificationsPage 106NDA-24310, Issue 1
R-9 Room Cutoff
R-9Room Cutoff
General Description
This feature allows the Console, PMS terminal, or Front Desk Terminal to temporarily restrict outgoing CO calls
from Guest room telephones while the Guests are away.
Operating Procedure
To set ROOM CUTOFF from Console or Front Desk Terminal
1. Press theRCS(set) key. The associated lamp illuminates.
2. Dial the station number. The console displays the station number.
3. Press...

NEAX2400 IPX Hotel Features and Specifications
NDA-24310, Issue 1Page 107
Room Cutoff R-9
Service Conditions (cont’d)
4. Through system data programming, a station in ROOM CUTOFF mode can be allowed to access certain
trunk routes, or be restricted from calling certain stations.
5. ROOM CUTOFF mode is set automatically when CHECK-IN/CHECKOUT [C-23] is initiated from the
Console, PMS terminal, or Front Desk Terminal.
6. At this time, if a D
termis used for a Guest station, “RC” may be displayed depending...

NEAX2400 IPX Hotel Features and SpecificationsPage 108NDA-24310, Issue 1
R-10 Room Status
R-10Room Status
General Description
This feature provides a ROOM STATUS display on the Console or Front Desk Terminal. The ROOM STATUS
display indicates the following:
AUTOMATIC WAKE-UP [A-10]
DO NOT DISTURB [D-11]
GUEST NAME DISPLAY through PMS [G-5]
MESSAGE WAITING [M-6]
ROOM CUTOFF [R-9]
Room Occupied
Room Reserved
Station number
VIP (PMS option)
Operating Procedure
To display ROOM STATUS on the Console or Front...