NEC Neax 2400 Ipx Hotel Features And Specifications

NEAX2400 IPX Hotel Features and Specifications
NDA-24310, Issue 1Page 119
2nd Wake-up Call - Same Guest Station S-128
S-1282nd Wake-up Call - Same Guest Station
General Description
By combining with AUTOMATIC WAKE-UP [A-27] service, this service allows two wake-up calls to be set for a
Guest room.
Operating Procedure
The notice asking the Guest to call the Attendant when the Guest wants to set the second wake-up call should be
prepared in the Guest room. The Guest sees the notice and calls the attendant....

NEAX2400 IPX Hotel Features and SpecificationsPage 120NDA-24310, Issue 1
S-128 2nd Wake-up Call - Same Guest Station
Operating Procedure (cont’d)
2. Dial the wake-up time requested.
3. Dial the second wake-up set code.
4. Press theENTERkey. The display shows “2ND WAKE UP ENT (A).” or “2ND WAKE UP ENT (S).”
according to the service set code dialed.
5. Dial the Guest station number. The display shows the station number.
6. Press theENTERkey.
Note 1
a.) To set the second wake-up call for another Guest...

NEAX2400 IPX Hotel Features and Specifications
NDA-24310, Issue 1Page 121
2nd Wake-up Call - Same Guest Station S-128
Service Conditions (cont’d)
13. The information can be printed by the hotel printer either in one-line or two-line format. (The selection is
to be made in the hotel system parameters.) However, when cancelled automatically via MAID STATUS
[M-22] service or when called by the attendant in case of AUTOMATIC WAKE-UP - HOTEL
ATTENDANT ASSISTANCE [A-58] service (“ATT CALLED”), the information...

NEAX2400 IPX Hotel Features and SpecificationsPage 122NDA-24310, Issue 1
T-13 Toll Terminal Access
T-13Toll Terminal Access
General Description
This feature enables Guest stations to directly access toll trunks. Access may be arranged on a direct-dial or
attendant-assisted basis, depending on the associated Central Office.
Operating Procedure
1. The Guest station dials the toll access code (usually “8”).
a.) If direct-dial service is allowed, the Guest will receive dial tone and may place the call.
b.)...

NEAX2400 IPX Hotel Features and Specifications
NDA-24310, Issue 1Page 123
Timing Start T-21
T-21Timing Start
General Description
This feature allows single-digit and multi-digit stations to use the same numbering plan levels by providing a
predetermined time delay between the completion of dialing and the start of ringing. By pressing the # or * key after
dialing the station number, the station user will not have to wait for ring start. By pressing theSTARTkeyonthe
Console, the attendant will not have to...

NEAX2400 IPX Hotel Features and SpecificationsPage 124NDA-24310, Issue 1
V-16 Voice Mail Service Via Message Center Interface (MCI)
V-16Voice Mail Service Via Message Center Interface
(MCI)
General Description
Voice mail service is available for Guest and Administration Stations through the Message Center Interface (MCI)
in the NEAX2400 IPX Hotel System. This capability allows the integration of a customer-provided voice mail
system, using an RS-232C interface. Guest calls are Call Forwarded - All...

NEAX2400 IPX Hotel Features and Specifications
NDA-24310, Issue 1Page 125
Voice Mail Service Via Message Center Interface (MCI) V-16
Service Conditions (cont’d)
3. Display operations for Console, Front Desk Terminal, and PMS are not performed (i.e. check-in,
checkout, room change recovery do not operate).
4. The NEAX2400 IPX will be notified of message waiting lamp on/off requirements by the Voice Mail
equipment via MCI.
5. The message waiting lamp control feature from MCI is not performed for Suite Room...

NEAX2400 IPX Hotel Features and SpecificationsPage 126NDA-24310, Issue 1
W-2 Wake-up Announcement - Headstart
W-2Wake-up Announcement - Headstart
General Description
This feature establishes a connection to the WAKE-UP ANNOUNCEMENT from the beginning of the message.
The message will not begin at a random point in the recording. A printout of unanswered or blocked AUTOMATIC
WAKE-UP [A-10] attempts for Guests is automatically provided by the hotel printer.
WAKE-UP ANNOUNCEMENT - HEADSTART operates...

NEAX2400 IPX Hotel Features and Specifications
NDA-24310, Issue 1Page 127
Wake-up Announcement - Headstart W-2
Service Conditions (cont’d)
7. Ringing duration for AUTOMATIC WAKE-UP [A-10] can be varied for 15 seconds, 30 seconds, 45
seconds, or 60 seconds.
8. AUTOMATIC WAKE-UP [A-10] overrides DO NOT DISTURB [D-11].
9. AUTOMATIC WAKE-UP [A-10] can be set for Guest rooms and regular Administration Stations. See
AUTOMATIC WAKE-UP [A-10] for more details on the methods which can be used.
10. If PMS Language...

NEAX2400 IPX Hotel Features and SpecificationsPage 128NDA-24310, Issue 1
This page is for your notes.