NEC Neax 2400 Ipx Hotel Features And Specifications

NEAX2400 IPX Hotel Features and Specifications
NDA-24310, Issue 1Page 109
Room Numbering R-17
R-17Room Numbering
General Description
This feature enables flexible assignment of station numbers based on the Guest ROOM NUMBERING plan.
Operating Procedure
Guest room calls are completed in the same manner as calls to ordinary stations.
Service Conditions
1. The same station number cannot be assigned to more than one station in the NEAX2400 IPX.
2. Guest numbers must be contained within Tenant 1.
3. One-,...

NEAX2400 IPX Hotel Features and SpecificationsPage 110NDA-24310, Issue 1
S-17 Split Access to Outgoing
S-17Split Access to Outgoing
General Description
This feature allows stations which are differentiated by Guest/Administration data, CLASS OF SERVICE -
INDIVIDUAL [C-15] data (Service Feature Class, Telephone Equipment Class, Route Restriction Class) or Day/
Night information to dial the same access codes but access different service features or trunk routes.
Operating Procedure
System data programming...

NEAX2400 IPX Hotel Features and Specifications
NDA-24310, Issue 1Page 111
Screening S-32
S-32Screening
General Description
This feature provides the Attendant with a special SCRN key which lets them selectively extend calls which require
SCREENING, and process other calls while waiting for the called station to answer. This is especially helpful when
the Attendant is responding to a VIP call which requires special handling, but must also enter other loops because
other calls require attention.
Operating...

NEAX2400 IPX Hotel Features and SpecificationsPage 112NDA-24310, Issue 1
S-49 Service Call Routing
S-49Service Call Routing
General Description
The SERVICE CALL ROUTING feature allows several extensions to be assigned the same number with different
terminations by differentiating between a main building and annex, or between floor numbers. This makes it
possible to set up service stations that are assigned the same number at several places in the hotel.
Operating Procedure
To call a service station
1....

NEAX2400 IPX Hotel Features and Specifications
NDA-24310, Issue 1Page 113
Secretarial Service - Guest Station S-74
S-74Secretarial Service - Guest Station
General Description
This feature allows the Console to temporarily set two or more Guest stations to operate in a boss/secretary
arrangement. All calls to the boss are diverted to the secretary. The secretary may screen the calls and then transfer
the call to the boss or just take messages.
Operating Procedure
To set SECRETARIAL SERVICE - GUEST STATION...

NEAX2400 IPX Hotel Features and SpecificationsPage 114NDA-24310, Issue 1
S-74 Secretarial Service - Guest Station
Operating Procedure (cont’d)
2. Dials the secretary’s station number. The display changes to display the secretary’s station number:
3. Press theENTERkey. The display changes as follows:
4. Press theENTERkey. The display changes as follows:
5. Press theEXITkey.
To call the Secretary Station from the Boss’ Station
1. Boss’ station lifts the handset. Boss’ Station receives dial tone.
2. Boss’...

NEAX2400 IPX Hotel Features and Specifications
NDA-24310, Issue 1Page 115
Secretarial Service - Guest Station S-74
Service Conditions (cont’d)
2. The Console Check-In/Checkout keys are replaced by the Secretary Service Set and Secretary Service
Reset keys (depending on system data).
Figure 14 Check-In/Checkout Keys Replaced by Secretary Service Set/Reset (SCS, SCR)
3. The attendant is unable to originate a call directly to the boss.
4. Only Guest can be assigned this feature.
5. Setting of secretarial...

NEAX2400 IPX Hotel Features and SpecificationsPage 116NDA-24310, Issue 1
S-75 Suite Room Service
S-75Suite Room Service
General Description
The SUITE ROOM SERVICE feature allows up to four analog stations to serve one suite room. Each telephone will
have its own station number. One station is designated as the primary station. When the primary station is called,
any secondary station in the suite may answer.
Operating Procedure
To answer a call
1. When a call is directed to the primary station, all...

NEAX2400 IPX Hotel Features and Specifications
NDA-24310, Issue 1Page 117
Suite Room Service S-75
Service Conditions (cont’d)
b.) MESSAGE WAITING [M-6] - This feature is set or cancelled against the primary station or
phantom number. When set, all suite room stations will display the MESSAGE WAITING [M-6]
indication.
c.) AUTOMATIC WAKE-UP [A-10] - This feature is set or cancelled against the primary station.
When the wake-up call arrives, it will ring all suite room phones.
d.) DO NOT DISTURB [D-11] and...

NEAX2400 IPX Hotel Features and SpecificationsPage 118NDA-24310, Issue 1
S-75 Suite Room Service
Service Conditions (cont’d)
e.) If a primary station is busy, an incoming call to the primary will, depending on the system
parameters, allow one of the following:
 Ringing idle secondary stations.
 The caller hears busy tone.
f.) For originating a call, one of several lines may be selected.
g.) The maximum number of multiple lines that can be set to a D
termis four.
20. When a few Dterms and a few analog...