NEC Neax 2400 Imx Hotel Feature Programming Manual

NEAX2400 IMX Hotel Feature Programming Manual
ND-70284 (E), Issue 2
Page 247
Timing Start T-21
Assignment Procedure 
STEP CMND BIT EXPLANATION
1SYS1
ASYD
INDEX 
129b
0Register Interdigit Timer:
Miscellaneous Timer Counter (MTC) is to be 
assigned a value from 0 Hex to F Hex (0-15).
The interval between dialed digits.
Timer Value Setting is MTC 
    ×
×× × 2 sec.
Note:
When this data is 00 Hex, default
data is automatically set to 6 sec. b
1
b2
b3
b4
Not used b5
b6
b7
2SYS1
ASYD
INDEX 
161b
0Don’t Disturb...

NEAX2400 IMX Hotel Feature Programming Manual
Page 248ND-70284 (E), Issue 2
T-21 Timing Start
Note 1:
Do not assign “*” or “#” as last digit of feature access code. No station may use “*” or “#” in numbering.
Note 2:
Room Cutoff (RSC 13)
Do Not Disturb (RSC 14)
Room Cutoff and Do Not Disturb (RSC 15) 3SYS1
ASYD
INDEX 
170b
0Room status data (b2, b1, b0) to be set at the time of Checkout
b
2b1b0b2b1b0
000= – 010 = Cleaned
0 0 1 =  To be Cleaned 0 1 1 = Ready for Occupancy
Do not assign other data. b
1
b2...

NEAX2400 IMX Hotel Feature Programming Manual
ND-70284 (E), Issue 2
Page 249
Voice Mail Service Via Message Center Interface (MCI) V-16
V-16 Voice Mail Service Via Message Center Interface 
(MCI)
General Description
Voice mail service is available for guest and Administration Stations through the Message Center Interface (MCI)
in the NEAX2400 IMX Hotel System. This capability allows the integration of a customer-provided voice mail
system, using an RS-232C interface. Guest calls are Call Forwarded – All...

NEAX2400 IMX Hotel Feature Programming Manual
Page 250ND-70284 (E), Issue 2
V-16 Voice Mail Service Via Message Center Interface (MCI)
Operating Procedure (cont’d)
To retrieve a message with operator assistance (attendant only):
Service Conditions
1. The type of port/trunk interface to the voice mail system depends on the type of voice mail system
provided. NEC recommends an analog station (16LCBE) port interface to the voice mail system. These
ports should be programmed in a UCD group.
2. The presence...

NEAX2400 IMX Hotel Feature Programming Manual
ND-70284 (E), Issue 2
Page 251
Wake-up Announcement – Headstart W-2
W-2  Wake-up Announcement – Headstart
General Description
This feature establishes a connection to the WAKE-UP ANNOUNCEMENT from the beginning of the message.
The message will not begin at a random point in the recording. A printout of unanswered or blocked AUTOMATIC
WAKE-UP [A-10] attempts for guests is automatically provided by the hotel printer.
WAKE-UP ANNOUNCEMENT – HEADSTART operates...

NEAX2400 IMX Hotel Feature Programming Manual
Page 252ND-70284 (E), Issue 2
W-2 Wake-up Announcement – Headstart
Service Conditions (cont’d)
6. This feature provides three additional wake-up attempts at fixed 3-minute intervals. If the called station is
busy for four attempts, a message is printed on the hotel printer. The number of retries for a no-answer
condition is determined by system data. A maximum of three retries can be assigned.
7. Ringing duration for AUTOMATIC WAKE-UP [A-10] can be varied for...