Home > NEC > Communications System > NEC Neax 2400 Imx Fusion Network System Manual

NEC Neax 2400 Imx Fusion Network System Manual

    Download as PDF Print this page Share this page

    Have a look at the manual NEC Neax 2400 Imx Fusion Network System Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							LIST OF FIGURES ND-70185 (E)
    Pag e vi
    Revision 3.0
    LIST OF FIGURES  (CONTINUED)
    Figure TitlePag e
    Figure 5-2 Fusion-CCIS Network  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   60
    Figure 5-3 How to Upgrade the Numbering Plan Data of an Existing CCIS Network . . . . . . . . . . . . . . . .   61
    Figure 5-4 Assignment of Memory Block. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   62
    Figure 5-5 LDM and NDM Allocation (ASYDL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   62
    Figure 5-6 Self-FPC Assignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   63
    Figure 5-7 ASYDN Command Display (example) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   64
    Figure 5-8 Assignment of Module Accommodation Data  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   65
    Figure 5-9 AFMU Command Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   65
    Figure 5-10 Telephone Number Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   66
    Figure 5-11 Assignment of Logical Route Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   66
    Figure 5-12 ALRTN Command Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   67
    Figure 5-13 Telephone Number Allocation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   67
    Figure 5-14 ANPDN Sample Data Sheet  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   68
    Figure 5-15 ANPDN Command Display  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   68
    Figure 5-16 ASPAN Sample Data Sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   69
    Figure 5-17 ASPAN Command Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   69
    Figure 5-18 ALGSN Sample Data Sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   70
    Figure 5-19 ALGSN Command Display (example) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  71
    Figure 5-20 B-ch and D-ch  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   72
    Figure 5-21 ACRD Command Display (example) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   72
    Figure 5-22 ACTK Command Display (example)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   76
    Figure 5-23 Mounting FCH and DTI Cards in Regular Density Slots  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   76
    Figure 5-24 Mounting FCH and DTI Cards in High-Density Slots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   78
    Figure 5-25 How to Assign C_LEN Data (Type 2). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   79
    Figure 5-26 MBCT Command Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   81
    Figure 5-27 Assignment of FCH Number  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   82
    Figure 5-28 AFCH Command Display (example)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   82
    Figure 5-29 AFRT Sample Data Sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   83
    Figure 5-30 AFRT Command Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   83
    Figure 5-31 Fusion Network (example) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   84
    Figure 5-32 AFPC Command Display (example)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   84
    Figure 5-33 AFPC Sample Data Sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   85
    Figure 5-34 ACAN Sample Data Sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   86
    Figure 5-35 ACAN Command Display (example)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   86
    Figure 5-36 Example of OGC  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   87
    Figure 5-37 Example of OGCA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   89
    Figure 5-38 Example of LCR/LCRS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   90
    Figure 5-39 External Router - Overview  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   97
    Figure 5-40 Hardware Connections for External Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  97
    Figure 5-41 Connection Route Class Data Sample. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   98
    Figure 5-42 Sample Data Assignment (ACTK) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   99
    Figure 5-43 Assignment of FCHN (Example)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   100
    Figure 5-44 Sample Data Assignment (AFPC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   101
    Figure 5-45 Internal LAN Routing Data Assignment Image (Example) . . . . . . . . . . . . . . . . . . . . . . . . . . . .   101
    Figure 5-46 Sample Data Assignment (AETH) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   102
    Figure 5-47 How to Assign Destination IP and Next IP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   102
    Figure 5-48 Sample Data Assignment (ACAN) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   103
    Figure 5-49 FCCS Networking over IP - Overview  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   104
    Figure 5-50 Hardware Connections for FCCS Networking over IP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   104 
    						
    							ND-70185 (E) LIST OF FIGURES
    Page vii
    Revision 3.0
    LIST OF FIGURES  (CONTINUED)
    Figure TitlePag e
    Figure 5-51 Sample Data Assignment (ACRD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   105
    Figure 5-52 Sample Data Assignment (ACTK) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   105
    Figure 5-53 Assignment of FCHN (Example)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   106
    Figure 5-54 Sample Data Assignment (AETH) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   107
    Figure 5-55 How to Assign Destination IP and Next IP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   107
    Figure 5-56 Sample Data Assignment (ACAN) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   108
    Figure 5-57 Sample Data Assignment (AFRT)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   108
    Figure 5-58 Sample Data Assignment (AGIP). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   109
    Figure 5-59 “Basic LENS Data” Assignment of Speech Channels (AFIP)  . . . . . . . . . . . . . . . . . . . . . . . . .   110
    Figure 6-1 Fusion Network  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   133
    Figure 6-2 LED Indications on Fusion Link Related Circuit Cards  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   134
    Figure 6-3 Fusion Link Test Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   135
    Figure 6-4 Loopback Points of DTI Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   136
    Figure 6-5 How to Set the Fusion Link Test Mode  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   137
    Figure 6-6 Loopback Point Designation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   137
    Figure 6-7 Fusion Link-Test Results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   138
    Figure 6-8 Station-to-Station Connection Test (origination) via FCCS  . . . . . . . . . . . . . . . . . . . . . . . . . . .   139
    Figure 6-9 ATTCON Connection Test (origination) via FCCS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   140
    Figure 6-10 Line Connection Test (origination) via FCCS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   141
    Figure 6-11 3-party Conference Trunk Function Test via FCCS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   142
    Figure 6-12 Fusion Alternate Routing Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   143
    Figure 6-13 CCIS-FCCS Outgoing Call Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   144
    Figure 6-14 Loopback Points of SDT Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   145
    Figure 6-15 Loopback Setting by P-SW key on PA-SDTA Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   145
    Figure 7-1 Related Hardware  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   148
    Figure 7-2 3-B PM C-level Infinite Loop (Permanent) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   149
    Figure 7-3 How to Initialize the FCH (PA-FCHA) Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  149
    Figure 7-4 How to Replace the FCH (PA-FCHA) Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   150
    Figure 7-5 3-C PM C-level Infinite Loop (Temporary) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   151
    Figure 7-6 3-D PM Lockup Failure (Permanent) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   151
    Figure 7-7 3-E PM Lockup Failure (Temporary)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   152
    Figure 7-8 Fusion Link (Signaling Link) Failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   153
    Figure 7-9 13-H/13-I/13-J Signaling Link Failure System Message  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   153
    Figure 7-10 FCH-DTI Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   154
    Figure 7-11 23-S FCH Failure Notification  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   155
    Figure 7-12 10 BASE-T Cable Connection Check  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   156
    Figure 7-13 How to Check 10 BASE-T Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   157
    Figure 7-14 How to Replace HUB (PA-M96) Card  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   158
    Figure 7-15 23-T FCCH Fault Recovery Notification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   159
    Figure 7-16 23-U FCCH Status Information  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   160
    Figure 7-17 23-U FCCH Status Notification - Initial Setting Failure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  161
    Figure 7-18 23-U FCCH Status Notification - Spanning Tree Abnormal Answer  . . . . . . . . . . . . . . . . . . . .   162
    Figure 7-19 Spanning Tree Abnormal Answer  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   163
    Figure 7-20 23-U ETHER Transfer Failure  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   164
    Figure 7-21 23-U FCCH Status Notification - Spanning Tree Generation End . . . . . . . . . . . . . . . . . . . . . .   165
    Figure 7-22 23-U FCCH Status Notification - Spanning Tree Generation . . . . . . . . . . . . . . . . . . . . . . . . . .   166
    Figure 7-23 23-U FCCH Status Notification - Checksum Verification Failure . . . . . . . . . . . . . . . . . . . . . . .   166
    Figure 7-24 23-W FCCH Alternate Routing Start Notification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  167
    Figure 7-25 23-X FCCH Alternate Routing End Notification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  167 
    						
    							LIST OF FIGURES ND-70185 (E)
    Page viii
    Revision 3.0
    LIST OF FIGURES  (CONTINUED)
    Figure TitlePag e
    Figure 8-1 Network Connection Type  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   170
    Figure 8-2 NEAX2000 IVS
    2 to NEAX2400 IMX Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   171
    Figure 8-3 NEAX2400 IMX to NEAX2400 IMX Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   172
    Figure 8-4 Allowable SPAN from the Center FUG  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  173
    Figure 8-5 Patterns of Number Portability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   176
    Figure 8-6 Centralized Maintenance - EX-FCCS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   179
    Figure 8-7 PC Assignment in EX-FCCS Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  181
    Figure 8-8 Port Allocation and Related Command for CCIS Trunk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   187
    Figure 8-9 CIC Number Assignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   189 
    						
    							LIST OF TABLES
    Table TitlePag e
    ND-70185 (E) LIST OF TABLES
    Page ix
    Revision 3.0 Table 4-1 SENSE Switch Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  32
    Table 4-2 MODE Switch Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  34
    Table 4-3 DIP Switch (SW14) Setting  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  34
    Table 4-4 Switch Setting Patterns for the DTI Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  35
    Table 4-5 Digital Pad Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  39
    Table 5-1 Route Class Data Assignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
    Table 5-2 Data Programming Sheet for Regular Density Slot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  77
    Table 5-3 Data Programming Sheet for High Density Slot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
    Table 7-1 List of Fusion-related System Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  147
    Table 8-1 EX-FCCS Network Type Classification  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  170
    Table 8-2 Patterns of Number Portability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176
    Table 8-3 NEAX2000 IVS
    2 Fault Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178
    Table 8-4 CCIS Service in EX-FCCS Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  180 
    						
    							LIST OF TABLES ND-70185 (E)
    Pag e x
    Revision 3.0
    This page is for your notes. 
    						
    							ND-70185 (E) CHAPTER 1
    Page 1
    Revision 3.0
    CHAPTER 1 INTRODUCTION
    1. General
    This manual covers the installation of the Fusion system. 
    2. How to Follow This Manual
    This manual consists of the following chapters.
     CHAPTER 1 (INTRODUCTION)
    Explains how to use this manual.
     CHAPTER 2 (GENERAL)
    Outlines the Fusion system configuration and lists available service features.
     CHAPTER 3 (SYSTEM CONFIGURATION)
    Explains the hardware configuration of the Fusion system.
     CHAPTER 4 (INSTALLATION)
    Consists of the following topics:
     Static Cautions
     Switch Settings (PA-M96, PA-FCHA, PA-24DTR)
     CHAPTER 5 (DATA PROGRAMMING)
    Provides basic data assignment procedures using the following examples.
     Installing a new Fusion network
     Upgrading a CCIS network
     CHAPTER 6 (POST INSTALLATION TEST)
    Explains how to perform installation tests, focusing on the Fusion link connection test.
     CHAPTER 7 (TROUBLESHOOTING)
    Explains Fusion-related system messages and the repair procedures.
     CHAPTER 8 (EX-FCCS)
    Consists of the following EX-FCCS topics:
     Network Configuration
     Feature Descriptions
     Data Programming 
    						
    							CHAPTER 1 ND-70185 (E)
    Page 2
    Revision 3.0
    INTRODUCTION
    Related Manuals
    3. Related Manuals
    To complete the installation of the Fusion system, the following manuals are required:
     NEAX2400 IMX Circuit Card Manual
     NEAX2400 IMX Installation Manual
     NEAX2400 IMX Office Data Specification
    This manual assumes that the reader has sufficient knowledge of the installation of both the CCIS No. 7 and the
    ACIS systems. For more information on these systems, refer to the related manuals. 
    						
    							ND-70185 (E) CHAPTER 2
    Page 3
    Revision 3.0
    CHAPTER 2 GENERAL
    1. What is Fusion and its Advantages
    The main advantages of the Fusion network are as follows:
    1.1 Improved Inter-Office Service Features
    The Fusion system can eliminate the constraints normally associated with network services that are offered
    using Common Channel Inter-Office Signaling (CCIS).
    1.2 Use of Telephone Numbers
    A Fusion system allows you to use Telephone Numbers in addition to the existing station numbers. (In the
    remainder of this manual, the existing station numbers are referred to as Physical Station Numbers.) Fusion
    service features are activated when a Telephone Number is dialed. The Telephone Number, which can be
    assigned on a station basis, is a unique number on a Fusion network. If required, numbering plan data,
    which is identical to that of an existing station number, can be used to maintain consistency of the number-
    ing plan. When this plan is adopted, you can use the same numbering plan data after introducing the Fusion
    system.
    Note:A maximum of 16 digits can be used as a Telephone Number.
    Figure 2-1   Telephone Number
    Fusion features 
      are activated.
    Telephone Number can be assigned to a station using the LENs or by the Physical Station Number depending on the programming
    as shown below.
    Telephone Number: 410000LENS
    Physical Staion Number
    STN: 2500STN: 2000
    Telephone Number: 410000
    STN a
    STN b
    410001Fusion Network
    Fusion features are activated when a Telephone Number is dialed.
    dialing a Telephone Number.....
    STN: Physical Station NumberLENS: 000010         410000
    STN: 2000          410000
    STN: 2000
    STN: 2000 STN: 2000 STN: 2000
    LENS: 000010
    LENS: 000010
    LENS: 000010
    LENS: 000010
      When using LENs
      When using Physical Station Number
    Telephone Number
    Note:  For more information, see Assignment of Telephone Numbers in this manual. Telephone Number: 410000
    Telephone Number: 410001 
    						
    							CHAPTER 2 ND-70185 (E)
    Page 4
    Revision 3.0
    GENERAL
    Free Numbering
    2. Free Numbering
    A Telephone Number can be assigned to a desired station on the Fusion network using the simple command
    operation shown below.
    Figure 2-2   Free Location
    2.1 Centralized Maintenance Administration Terminal (MAT)
    A Fusion network has one Network Control Node (NCN) and Local Nodes (LNs). The NCN has the Cen-
    tralized-MAT, which runs on Windows 95/NT. The MAT can collect fault information from all nodes on
    the network. The NCN has Network Data Memory, which stores the data related to network level. The Tele-
    phone Numbers, for example, can be changed using the Centralized-MAT at the NCN. The MAT also al-
    lows the user to manage network-level office data.
    Figure 2-3   Centralized MAT on Fusion Network
    Telephone Number
            411111
    NCN
    LN Node A
    Node B STN 2000
    STN 2000 STN 2000
    STN: Physical Station NumberNCN: Network Control Node
    LN: Local Node
    In this figure, the user is changing the location of Telephone Number 411111 to Node B.
    user
    Telephone #: 411111
                  STN: 2000
    Telephone #: 411111
                 STN: 2000Node A
    Node B
    Note
    Note:   The ALGSN command is used for assigning Telephone Numbers.  See 5.6 Assignment of Telephone Numbers for more 
                 detail.
    MATNode C
    LN
    Fusion Network
    Changelocation
    Node A
    Node B
    NCN
    LN Node A
    Node BNode C
    LN
    Node B
    December 12 1997
    AM 3:12:13
    
    Node B         FCH Failure
    
                  MG: 00
                   U   : 02
                   G   : 11
    
                 :
                 :
                 :
    FCH fault....Fault Information
    Fault Information
    Fault information can be collected at NCN via Fusion Link.
    MATPRT
    Fusion NetworkFusion Link
    NCN: Network Control Node     LN: Local Node13-H
    1. xxxx xxxx 0010 1222
    4. x0010 1110 10110 1FFF
    7. E23C CAAB12 000 000013-H
    1. xxxx xxxx 0010 1222
    4. x0010 1110 10110 1FFF
    7. E23C CAAB12 000 0000
    NEC
    Note
    Note:Actual system message is indicated in a different format. 
    						
    							ND-70185 (E) CHAPTER 2
    Page 5
    Revision 3.0
    GENERAL
    Fusion System Configuration
    3. Fusion System Configuration
    The Fusion system can be divided into the following two types. Figure 2-4 shows a Fusion system with Fusion
    Call Control Handler (FCH) cards.
    Figure 2-4   Fusion System Configuration (with FCH)
    Figure 2-5 shows a Fusion system without Fusion Call Control Handler (FCH) cards.
    Figure 2-5   Fusion System Configuration (without FCH)
    FCH
    CPU
    LANI
    HUB
    FCH
    CPU
    LANI
    HUB DTI
    DTI DTI
    FCH
    HUB
    DTIFusion Link
    1.5M
    Dch:  64K-1.5M
    CPU
    LANI
    FCH
    HUB
    DTIFusion Link
    1.5M
    Dch:  64K-1.5M Node B Node ANode C
    10BASE-T 10BASE-T 10BASE-T
    TI:  Digital Trunk Interface     FCH:  Fusion Call Control Handler     LANI:  LAN Interface
    DTI
    4.9 ft.
    4.9 ft.4.9 ft. 4.9 ft.
    CPU
    LANICPU
    LANI DTI
    DTIDTI DTIDTI
    Fusion Link Fusion Link
    CPU
    LANI
    DTINode B
    Node ANode C
    10BASE-T 10BASE-T
    HUB
    T1 Link T1 Link
    DTI:  Digital Trunk Interface     LANI:  LAN Interface 
    						
    All NEC manuals Comments (0)

    Related Manuals for NEC Neax 2400 Imx Fusion Network System Manual