NEC Neax 2400 Imx Fusion Network System Manual
Have a look at the manual NEC Neax 2400 Imx Fusion Network System Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
CHAPTER 5 ND-70185 (E) Page 106 Revision 3.0 DATA PROGRAMMING Assignment of FCH Related Data STEP 3: MBCT Unbusy the connection trunk data assigned in the previous step, by using the MBCT command. This is required for FCH, FGH trunks as well as speech channels. STEP 4: AFCH Assign FCH number on an FCH circuit card basis. In the following example, FCHN=1 is assigned for the FCH circuit card. For the FGH card, FCHN assignment is not necessary. Figure 5-53 Assignment of FCHN (Example) Q-sig PBX FCH FGHDTI ROUTER Nail Down Connection T1 speech signaling RT13RT14RT1 to CPU FCHN=1 FCHEN: 000030 FCHN 1 FCHEN 000030 AFCH command display Note Note: This setting is a sample.
ND-70185 (E) CHAPTER 5
Page 107
Revision 3.0
DATA PROGRAMMING
Assignment of FCH Related Data
STEP 5: AETH
Assign the FCCS routing data, when external router is used by specifying IP address.
FPC (Fusion Point Code): Assign FPC number (1 - 253) of the Destination Node.
USE_GATE: Assign 0 (= not use gateway).
FCHN (FCH Number): Assign the FCH Number, specified in STEP 4.
C_RT (Connection Route): 1 - 1023
DST_IP (Destination IP Address): Assign FGH IP address of the Destination Node.
NEXT_IP (Next IP Address): Assign FGH IP address of the Next Node (Node to be passed to).
Example data assignment is shown in Figure 5-54 and Figure 5-55.
Figure 5-54 Sample Data Assignment (AETH)
Figure 5-55 How to Assign Destination IP and Next IP
FPCUSE_GATE
0
C_RT
FCHN
(FCH Number)
DST_IP
NEXT_IP
12
CNT
bbb.bbb.bbb.b
1
1
bbb.bbb.bbb.b
FPCUSE_GATE
0
C_RT
FCHN
(FCH Number)
DST_IP
NEXT_IP
12
CNT
bbb.bbb.bbb.b
1
1
ccc.ccc.ccc.c
A maximum of 8 routings are available.
11 12
FPC=11FPC=10FPC=12
FCHFCHFCH
C_RT=1
Internet/
Intranet
POWERPOWERPOWER
Router
RouterRouter
FGH
aaa.aaa.aaa.abbb.bbb.bbb.b
FGH
ccc.ccc.ccc.c
FGH
NEXT_IPDST_IP
Destination IPNext IP Destination Node does not change.
Address of node to be passed to.
NEXT_IP NEXT_IP
DST_IP DST_IP
destintaion information embedded in the packet
bbb.bbb.bbb.b ccc.ccc.ccc.cNEXT_IP
DST_IPccc.ccc.ccc.cccc.ccc.ccc.c
placing a call via FCCS
speech
destination information embedded in the packet
CHAPTER 5 ND-70185 (E) Page 108 Revision 3.0 DATA PROGRAMMING Assignment of FCH Related Data STEP 6: ACAN Assign the Fusion Connection Index Code (FCIC) for the Next Node. FPC (Fusion Point Code): Assign FPC number of the Self-node. FCIC (Fusion Connection Index Code): Assign Fusion CIC of the Self-node. C_LENS (Connection_LENS): Assign DTI LENS data (Bch data), specified in STEP 2. Figure 5-56 Sample Data Assignment (ACAN) STEP 7: AFRT Set Connection Route Numbers of the Speech Channels for the FCHN which was assigned in STEP 4. FCHN (FCH Number): Assign FCHN, specified in STEP 4. C_RT (Connection Route): Assign Connection Route of the Speech Channels, specified in STEP 2. Figure 5-57 Sample Data Assignment (AFRT) FCH FGHDTI ROUTER Nail Down Connection T1 RT13RT14RT1 FPC FCIC10 1 C_LENS 002010 ACAN command parameters Note Note: This setting is a sample. FPC=10FPC (Self-node) speechFCIC1: 002010 FCIC2: 002011 FCIC3: 002012 FCIC10: 002022 to CPU FCHN CNT1 2 1 1 C_RT AFRT command parameters Note 1 Note 2 assigned in STEP 4 PBX FCH FGHDTI ROUTER Nail Down Connection T1 speech RT13RT14RT1 FCHN=1 to CPUNote 1: This setting is a sample. Note 2: A maximum of 8 C_RT can be programmed.
ND-70185 (E) CHAPTER 5 Page 109 Revision 3.0 DATA PROGRAMMING Assignment of FCH Related Data STEP 8: AGIP Assign IP addresses of FGH card and its connected router. FCHEN (FCH Equipment Number): Assign LV0 data of FGH LENs. FGH_IP (FGH IP Address): Assign IP address of the FGH card. DG_IP (Default Gateway IP Address): Assign IP address of the router. ARP (ARP Frame Type): Assign 2 (= DIX spec.). CONTTYP (Voice Channel Control Type): Assign 1 (= Server). LINK_NUM (Qsig-Prime Link Number): Assign the number (1 - 32) of interfaces for speech (= total DTI card number). CSLINK_NUM (Client/Server Connection Max. Number): Assign 0. Figure 5-58 Sample Data Assignment (AGIP) PWR PWR 00 0102 0304 0506 0708 0910 1112 13 14 1516 17 18 1920 21 22 2300 0102 0304 0506 0708 0910 1112 13 14 1516 17 18 1920 21 22 23 LV 0 slot 21 FCH FGHDTI ROUTER Nail Down Connection T1 RT13RT14RT1 to CPUNote: This setting is a sample. FPC=10 Assign LV0 data of FGH LENS. FGH_IP: aaa.aaa.aaa.aDG_IP: xxx.xxx.xxx.x Speech
CHAPTER 5 ND-70185 (E) Page 110 Revision 3.0 DATA PROGRAMMING Assignment of FCH Related Data STEP 9: AFIP Assign the FCCS Networking over IP data for controlling Speech Channels between PBX and router. FCHN (FCH Number): Assign FCHN specified in STEP 4. FGHEN (FGH Equipment Number): Assign LV0 data of FGH LENs. LENS (Equipment Number of Qsig-Prime B channel): Assign basic LENS of the Speech Channels. Note 2 RT-ACC (Router Access Number): Assign the Router Access Number (max. 16 digits). Note 1:Assign LENS and RT_ACC corresponding to the router port. Note 2:Assign the “Basic LENS data” of the Speech Channels (1st LEN of the HW block where the DTI card is mounted). Figure 5-59 “Basic LENS Data” Assignment of Speech Channels (AFIP) STEP 10: ASYD Assign the data for nailed-down connection between FCH and FGH cards. SYS 1, Index 60, b4 = 1 (Nailed-down connection: In service) STEP 11: AFCD Assign the detailed nailed-down connection data. LENS-A: Assign the LENS data of FCH card. EAD-A: Assign 0. LENS-B: Assign the LENS data of FGH card. EAD-B: Assign 0. Note:Assign all the data for FCH/FGH LENS (LV0-LV7). PWR PWR HW0 HW1 HW2 HW3 HW4HW5 HW6 HW7 HW8 HW9 HW10HW11 indicates basic LENS data. HW:Highway Block The following shows basic LENS data for assigning Q-sig-Prime B channel data. Assign the 1st LEN of the HW block where the DTI card is mounted. PIM
ND-70185 (E) CHAPTER 5 Page 111 Revision 3.0 DATA PROGRAMMING Assignment of FCH Related Data 7.4 Flexible Routing - FCCS A Fusion trunk call can be routed via non-Fusion trunk (C.O. or Tie Line), if the Fusion trunks are all busy or Data Link Failure occurs at the FCH card, etc. This feature can be used since program software Release 5. Service Conditions This feature may be activated when the Fusion trunks are all busy or FCCS Link Failure (Layer 2 down) occurs at the FCH card. This feature is available when the called party is an analog station, D term or ISDN terminal. (When the called party is wireless terminal or DAT/Paging Trunk, the feature is not activated.) Use LCR/LCRS for this feature. The access code of this feature (ACC: max. 24 digits) is assigned by the AFRFL command. When the selected non-Fusion trunks (LCR/LCRS) are also busy, route selection is performed according to the LCR/LCRS table. The same is performed when the selection encounters a Fusion trunk busy again. STEP 1: Basic Data Make sure that the following data has been already assigned for the Fusion network. Flexible Route Numbering Plan Data (LCR/LCRS data) Station-to-Station connection data STEP 2: AFRFL Assign Flexible Route data (tenant number, destination node FPC and feature access code) by the AFRFL command. TN: Tenant Number of the Calling Party FPC: Fusion Point Code of the destination node ACC: Access Code for Flexible Routing (to C.O. or Tie Line), the same number assigned by ASPA command for LCR/LCRS
CHAPTER 5 ND-70185 (E) Page 112 Revision 3.0 DATA PROGRAMMING Office Data Sheets 8. Office Data Sheets 8.1 Data Sheet for AFMUPL FUSION POINT CODE (FPC) 1-253MODULE GROUP (MG) 0/1UNIT 0-3REMARKS 00 1 1 00 1 1 00 1 1 00 1 1
ND-70185 (E) CHAPTER 5 Page 113 Revision 3.0 DATA PROGRAMMING Office Data Sheets 8.2 Data Sheet for ALRTN LOGICAL ROUTE NUMBER (LGRT) 1-899FUSION POINT CODE (FPC) 1-253EXTERNAL ROUTE NUMBER (RT) 1-255REMARKS
CHAPTER 5 ND-70185 (E) Page 114 Revision 3.0 DATA PROGRAMMING Office Data Sheets 8.3 Data Sheet for ANPD/ANPDL/ANDPN TENANT NUMBER (TN)1ST DIGIT (1ST DC)CONNECTION STATUS INDEX (CI)BUSY LAMP FIELD (BLF)
ND-70185 (E) CHAPTER 5 Page 115 Revision 3.0 DATA PROGRAMMING Office Data Sheets 8.4 Data Sheet for ASPA/ASPAL TENANT NUMBER (TN)ACCESS CODE (ACC) MAX. 6 DIGITSCONNECTION STATUS INDEX (CI) 1/2KIND OF SERVICE (SRV)ANNOUNCEMENT TENANT NUMBER (TN) 1-125ANNOUNCEMENT EQUIPMENT NUMBER (EQP) 122-125REMARKS NNormal 10 H Hooking NNormal 10 H Hooking NNormal 10 H Hooking NNormal 10 H Hooking NNormal 10 H Hooking NNormal 10 H Hooking NNormal 10 H Hooking NNormal 10 H Hooking NNormal 10 H Hooking NNormal 10 H Hooking NNormal 10 H Hooking NNormal 10 2 Hooking NNormal 10 H Hooking NNormal 10 H Hooking NNormal 10 H Hooking NNormal 10 H Hooking NNormal 10 H Hooking NNormal 10 H Hooking NNormal 10 H Hooking