NEC Neax 2400 Imx Callcenterworx Enterprise Acd System Manual
Here you can view all the pages of manual NEC Neax 2400 Imx Callcenterworx Enterprise Acd System Manual. The NEC manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 181
CHAPTER 4 NDA-24282 (E) Pag e 1 62 Revision 1.0 PA-4DTLA (4DTL) NEAX2400 IMS B00MDF G R A004DTLModular JackDTE RS232 B B10 Y A10
Page 182
NDA-24282 (E) CHAPTER 4 Page 163 Revision 1.0 PA-CC98 (ETHER) PA-CC98 (ETHER) Ethernet Controller 1. Functional Outline In the NEAX2400 ICS OAI System, this circuit card supports the functions for interface between the CPU (IP) circuit card and the external computer. If circuit card type, this circuit card is directly connected with the CPU card (PA-CP53). If module type, being paired with PA-GT (MBB) card, it connects the Interface Processor (IP) and the User Application Processor (UAP) through a LAN....
Page 183
CHAPTER 4 NDA-24282 (E) Pag e 1 64 Revision 1.0 PA-CC98 (ETHER) 2. Circuit Card Mounting Locations/Conditions The mounting locations and conditions of this circuit card are shown below. (a) In the case of circuit card type When mounting in the PIMU-A When mounting in the PIMB Mounting Module PIMU-A 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 Note: Indicates the mounting locations of this circuit card. Mounting Module PIMB 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14...
Page 184
NDA-24282 (E) CHAPTER 4 Page 165 Revision 1.0 PA-CC98 (ETHER) (a) In the case of module type 3. Locations of Lamps, Switches, and Connectors The locations of lamps, switches, and connectors equipped on this circuit card are shown below. Mounting Module APM 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23PA-CC98 SW0 BUS LAN FUSE OPE SW1ERR S2 S1 S3 SW2
Page 185
CHAPTER 4 NDA-24282 (E) Pag e 1 66 Revision 1.0 PA-CC98 (ETHER) 4. Lamp Indications The meaning of indication of each lamp on this circuit card is shown below. 5. Switch Setting Each switch setting on this circuit card and its meaning are shown in the tables on the following pages. The CC98 Internet address is set by using the AIPT MAT command. For ICS and IMX, Internet is set only by the AIPT command. For HDS (IMG) configurations, the AIPT command is used for setting the Internet address for software...
Page 186
NDA-24282 (E) CHAPTER 4 Page 167 Revision 1.0 PA-CC98 (ETHER) SWITCHDIP SW No.SETTINGDEFAULT SETTINGMEANING SW0 (8 DIP Switches)1ON Sets 0, corresponding to bit 0 of MAC address OFF Sets 1, corresponding to bit 0 of MAC address 2ON Sets 0, corresponding to bit 1 of MAC address OFF Sets 1, corresponding to bit 1 of MAC address 3ON Sets 0, corresponding to bit 2 of MAC address OFF Sets 1, corresponding to bit 2 of MAC address 4ON Sets 0, corresponding to bit 3 of MAC address OFF Sets 1, corresponding to...
Page 187
![Page 187
CHAPTER 4 NDA-24282 (E)
Pag e 1 68
Revision 1.0
PA-CC98 (ETHER)
SW1 (Continued)
4ON Sets 0, corresponding to bit 11 of MAC address
OFF Sets 1, corresponding to bit 11 of MAC address
5ON×Fixed
6ON×Fixed
7ON×Fixed
8ON×Fixed
[Reference]
Setting of MAC address
On LAN and TCP/IP, this circuit card can have the following
addresses and ports.
MAC Address: 000032250xxxH (48 bits)
TCP Port Numbers: 16 port numbers of 1024 ~ 1039
The last 12 bits of MAC address must be set by switches
SW0 and SW1 before starting...](http://img.usermanuals.tech/thumb/54/84336/w300_nec-neax2400-imx-callcenterworx-enterprise-acd-system-manual_d-186.png "Page 187
CHAPTER 4 NDA-24282 (E)
Pag e 1 68
Revision 1.0
PA-CC98 (ETHER)
SW1 (Continued)
4ON Sets 0, corresponding to bit 11 of MAC address
OFF Sets 1, corresponding to bit 11 of MAC address
5ON×Fixed
6ON×Fixed
7ON×Fixed
8ON×Fixed
[Reference]
Setting of MAC address
On LAN and TCP/IP, this circuit card can have the following
addresses and ports.
MAC Address: 000032250xxxH (48 bits)
TCP Port Numbers: 16 port numbers of 1024 ~ 1039
The last 12 bits of MAC address must be set by switches
SW0 and SW1 before starting...")
CHAPTER 4 NDA-24282 (E) Pag e 1 68 Revision 1.0 PA-CC98 (ETHER) SW1 (Continued) 4ON Sets 0, corresponding to bit 11 of MAC address OFF Sets 1, corresponding to bit 11 of MAC address 5ON×Fixed 6ON×Fixed 7ON×Fixed 8ON×Fixed [Reference] Setting of MAC address On LAN and TCP/IP, this circuit card can have the following addresses and ports. MAC Address: 000032250xxxH (48 bits) TCP Port Numbers: 16 port numbers of 1024 ~ 1039 The last 12 bits of MAC address must be set by switches SW0 and SW1 before starting...
Page 188
NDA-24282 (E) CHAPTER 4 Page 169 Revision 1.0 PA-CC98 (ETHER) MODULE SLOT SWITCH SWITCH SHAPE REMARKS SW0 SW1 SW2Fixed for the system12345678ON 12345678ON 0
Page 189
CHAPTER 4 NDA-24282 (E) Pag e 1 70 Revision 1.0 PA-GT16 (MBB) PA-GT16 (MBB) Memory Bus Buffer 1. Functional Outline This circuit card is used in the OAI module type for the NEAX2400 IMX and ICS OAI System. It is a circuit card which repeats the memory bus on PA-CP54 (CPU) card side to ETHER (Ethernet Interface) gate card. 2. Circuit Card Mounting Locations/Conditions Mounting Module APM 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23PA-GT16 CPU (No.0 Sys) (PA-CP54)CPU (No.1 Sys)...
Page 190
NDA-24282 (E) CHAPTER 4 Page 171 Revision 1.0 PA-GT16 (MBB) 3. Locations of Lamps, Switches, and Connectors The locations of lamps, switches, and connectors equipped on this circuit card are shown below. 4. Lamp Indications The meaning of indication of each lamp on this circuit card is shown below. LAMP COLOR MEANING OF INDICATION OPE Green Remains lit while this circuit card and ETHER card are normally operating LAN ALM RedLights when the processor in ETHER card has become faulty or when ETHER card is...