NEC Neax 2000 Ivs2 Wcs System Manual
Here you can view all the pages of manual NEC Neax 2000 Ivs2 Wcs System Manual. The NEC manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 121
CHAPTER 4 CIRCUIT CARD INFORMATION PZ-PW122 (DC/DC PWR) NEAX2000 IVS2WCSSystemManual(PCS) ND-70920 (E), Issue 1.0Page 113 Switch Settings SWITCH NAMESWITCH NUMBERSETTING POSITIONFUNCTION CHECK SWON For turning AC power on OFF For turning AC power off CAUTION When the operating power is being supplied to this circuit card, do not plug/unplug this circuit card into/from its mounting slot. OFF ON
Page 122
NEAX2000 IVS2WCS System Manual (PCS)Page 114ND-70920 (E), Issue 1.0 CHAPTER 4 CIRCUIT CARD INFORMATION PZ-M537 (EXPMEM) PZ-M537 (EXPMEM) Locations of Lamps, Switches, and Connectors FAC E REAR CONNR: To CONN connector on PN-CP14 (MP) or PN-AP00-B (AP00) SW CONNR
Page 123
CHAPTER 4 CIRCUIT CARD INFORMATION PZ-M537 (EXPMEM) NEAX2000 IVS2WCSSystemManual(PCS) ND-70920 (E), Issue 1.0Page 115 Lamps Indications This card has no lamps. Switch Settings The figure in the SWITCH NAME column and the position in in the SETTING POSITION column indicate the standard setting of the switch. When the switch is not set as shown by the figure and , the setting of the switch varies with the system concerned. SWITCH NAMESWITCH NUMBERSETTING POSITIONFUNCTION CHECK SW (DIP SW) 1 For normal...
Page 124
NEAX2000 IVS2WCS System Manual (PCS)Page 116ND-70920 (E), Issue 1.0 CHAPTER 4 CIRCUIT CARD INFORMATION PN-SC03-A (CSH) PN-SC03-A (CSH) Locations of Lamps, Switches, and Connectors Lamp Indications LAMP NAMECOLOR FUNCTION RUN Green Flashes at 120 IPM while this card is operating normally. DOPE7 Green Remains lit when No. 7 circuit D channel link is connected. DOPE6 Green Remains lit when No. 6 circuit D channel link is connected. DOPE5 Green Remains lit when No. 5 circuit D channel link is connected....
Page 125
CHAPTER 4 CIRCUIT CARD INFORMATION PN-SC03-A (CSH) NEAX2000 IVS2WCSSystemManual(PCS) ND-70920 (E), Issue 1.0Page 117 Switch Settings The figure in the SWITCH NAME column and the position in in the SETTING POSITION column indicate the standard setting of the switch. When the switch is not set as shown by the figure and , the setting of the switch varies with the system concerned. NOTE 1:Set the groove on the switch to the desired position. NOTE 2:When the power is on, flip the MB switch to ON (UP...
Page 126
NEAX2000 IVS2WCS System Manual (PCS)Page 118ND-70920 (E), Issue 1.0 CHAPTER 4 CIRCUIT CARD INFORMATION PN-2CSIA (CSI) PN-2CSIA (CSI) Locations of Lamps, Switches, and Connectors OPE B13 LB B12 B11 B10 B02 B03 B01 B00 DL1 DL0
Page 127
![Page 127
CHAPTER 4 CIRCUIT CARD INFORMATION
PN-2CSIA (CSI)
NEAX2000 IVS2WCSSystemManual(PCS)
ND-70920 (E), Issue 1.0Page 119
Lamp Indications
LAMP
NAMECOLOR FUNCTION
OPE Green Remains lit when the corresponding circuit is in use.
LB Red Remains lit when a loop-back is in progress.
B13 Red Not used (Flash [60 IPM])
B12 Red B channel status
ON : B2 channel of the No. 1 circuit is in use.
OFF : B2 channel of the No. 1 circuit is in idle.
Flash (60 IPM) : ZT is not connected to the No. 1 circuit.
ZT is in make-busy...](http://img.usermanuals.tech/thumb/54/84332/w300_nec-neax2000-ivs2-wcs-system-manual_d-126.png "Page 127
CHAPTER 4 CIRCUIT CARD INFORMATION
PN-2CSIA (CSI)
NEAX2000 IVS2WCSSystemManual(PCS)
ND-70920 (E), Issue 1.0Page 119
Lamp Indications
LAMP
NAMECOLOR FUNCTION
OPE Green Remains lit when the corresponding circuit is in use.
LB Red Remains lit when a loop-back is in progress.
B13 Red Not used (Flash [60 IPM])
B12 Red B channel status
ON : B2 channel of the No. 1 circuit is in use.
OFF : B2 channel of the No. 1 circuit is in idle.
Flash (60 IPM) : ZT is not connected to the No. 1 circuit.
ZT is in make-busy...")
CHAPTER 4 CIRCUIT CARD INFORMATION PN-2CSIA (CSI) NEAX2000 IVS2WCSSystemManual(PCS) ND-70920 (E), Issue 1.0Page 119 Lamp Indications LAMP NAMECOLOR FUNCTION OPE Green Remains lit when the corresponding circuit is in use. LB Red Remains lit when a loop-back is in progress. B13 Red Not used (Flash [60 IPM]) B12 Red B channel status ON : B2 channel of the No. 1 circuit is in use. OFF : B2 channel of the No. 1 circuit is in idle. Flash (60 IPM) : ZT is not connected to the No. 1 circuit. ZT is in make-busy...
Page 128
NEAX2000 IVS2WCS System Manual (PCS)Page 120ND-70920 (E), Issue 1.0 CHAPTER 4 CIRCUIT CARD INFORMATION PN-2CSIA (CSI) Switch Settings The figure in the SWITCH NAME column and the position in in the SETTING POSITION column indicate the standard setting of the switch. When the switch is not set as shown by the figure and , the setting of the switch varies with the system concerned. NOTE:Set the groove on the switch to the desired position. LAMP NAMECOLOR FUNCTION B00 Red B channel status ON : B0 channel of...
Page 129
CHAPTER 4 CIRCUIT CARD INFORMATION PN-AP00-A (DBM) NEAX2000 IVS2WCSSystemManual(PCS) ND-70920 (E), Issue 1.0Page 121 PN-AP00-A (DBM) Locations of Lamp, Switches, and Connectors RS3 RS2 RS1 RS0 SENSE RU N MB SW0 WE L3 L2 L1 L0 SW1 J16
Page 130
NEAX2000 IVS2WCS System Manual (PCS)Page 122ND-70920 (E), Issue 1.0 CHAPTER 4 CIRCUIT CARD INFORMATION PN-AP00-A (DBM) Lamp Indications Switch Settings LAMP NAMECOLOR FUNCTION RUN Green Flashes at 120 IPM while this card is operating normally. WE Red Not used L0-L3 Green Second data setting value for CMD001>250 0 1 (port0)-3 (port2) L3 Indication of transmitting status of port 0Indication of CTS signal status on por t0-2 L2 Indication of transmitting status of port 1Indication of DCD signal status on...