Home > NEC > Communications System > NEC Neax 2000 Ivs2 Remote Pim System Manual

NEC Neax 2000 Ivs2 Remote Pim System Manual

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual NEC Neax 2000 Ivs2 Remote Pim System Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 106
    Add page 81 to Favourites
    image text
    Enable zoom 
    							CHAPTER 4  CIRCUIT CARD INFORMATION
PN-DAIA (DAI)
NEAX2000 IVS2 Remote PIM System Manual    
ND-70917 (E), Issue 1.0   Page 73
SWITCH
NAMESWITCH
NUMBERSETTING
POSITIONFUNCTION CHECK
SW2 (DIP SW)
1ONControl channel signaling data 
transmission speed: 48 kbps
Control channel signaling data 
transmission speed: 64 kbps
2ONDTI frame configuration:
12-Multi Frame
DTI frame configuration:
24-Multi Frame
3ON Line code: AMI with ZCS
Line code: B8ZS
4ONSetting of control signal time slot
NOTE 4, NOTE 5 5ON
6ON
7
OFF
8ON
(Continued)
1
23
45
67
8ON
OFF
OFF
OFF
SWITCH NUMBER
TIME SLOT
NUMBER
45678
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
OFFON
OFF
OFF
ON
ON
OFF
OFF
ON
ON
OFF
OFF
ON
ON
OFF
OFF
ON
ON
OFF
OFF
OFFON
ON
ON
OFF
OFF
OFF
OFF
ON
ON
ON
ON
OFF
OFF
OFF
OFF
ON
ON
ON
ON
OFFON
ON
ON
ON
ON
ON
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
ON
ON
ON
ON
ONON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
OFF
OFF
OFF
OFF
OFFTS1
TS2
TS3
TS4
TS5
TS6
TS7
TS8
TS9
TS10
TS11
TS12
TS13
TS14
TS15
TS16
TS17
TS18
TS19
TS23
OFF
OFF
OFF
ON
OFF
    Add page 82 to Favourites
    image text
    Enable zoom 
    							 NEAX2000 IVS2 Remote PIM System ManualPage 74  ND-70917 (E), Issue 1.0
CHAPTER 4  CIRCUIT CARD INFORMATION
PN-DAIA (DAI)
The figure in the SWITCH NAME column and the position in   in the SETTING POSITION
column indicate the standard setting of the switch. When the switch is not set as shown by the
figure and  , the setting of the switch varies with the system concerned.
NOTE 1:Set the groove on the switch to the desired position.
NOTE 2:When the power is on, flip the MB switch to ON (UP position) before plugging/unplug-
ging the circuit card.
SWITCH
NAMESWITCH
NUMBERSETTING
POSITIONFUNCTION CHECK
SW3 (DIP SW)
1Set the equalizer according to the 
cable length between the system 
and the CSU.
OFF
2
OFF
3
OFF
4 Always set to OFF
JPS (Jumper Pin)
RightFor mounting this card on PIM1 - 
PIM7
LeftFor mounting this card on PIM0
JPR (Jumper Pin)
RightNeutral grounding on the receiving 
line is provided.
Neutral grounding on the receiving 
line is not provided.
(Continued)
1
23
4ON
ON
SW
-1SW
-2SW
-3CABLE
LENGTH
ON ON ON0 - 40 m 
(0 - 131.2 ft.)
ON ON OFF40 - 80 m
(131.2 - 262.5 ft.)
ON OFF ON80 - 120 m
(262.5 - 394 ft.)
ON OFF OFF120 - 160 m
(394 - 525 ft.)
OFF ON ON160 - 200 m
(525 - 656 ft.)
OFF OFF OFF Signal is not sent
ON
ON
OFF
Left
    Add page 83 to Favourites
    image text
    Enable zoom 
    							CHAPTER 4  CIRCUIT CARD INFORMATION
PN-DAIA (DAI)
NEAX2000 IVS2 Remote PIM System Manual    
ND-70917 (E), Issue 1.0   Page 75
NOTE 3:When the source clock signal is supplied via the line between the Main Site and the
Remote Site, set the SW1-1 and SW1-2 as indicated in the following table. In this case,
DAIA cards (DAIA0, DAIA1) must be mounted in PIM0.
NOTE 4:Time Slot Number 0, 20, 21, and 22 (TS0/20/21/22) cannot be used for control signal.
NOTE 5:This setting must be identical with the opposite DAIB card.
CONDITIONSDAIA0 DAIA1 DAIA2
REMARKS
SW
1-1SW
1-2SW
1-1SW
1-2SW
1-1SW
1-2
One DAIA card 
is provided.ON OFF – – – – Clock signal is sent to 
PLO0 of MP card via 
Supply Route 0 
(DAIA0).
Two or three 
DAIA cards are 
provided.ON OFF OFF ON OFF OFF Clock signal supply 
route automatically 
changes to Route 1 
(DAIA1), if a 
transmission line 
failure occurs on 
Supply Route 0.
    Add page 84 to Favourites
    image text
    Enable zoom 
    							 NEAX2000 IVS2 Remote PIM System ManualPage 76  ND-70917 (E), Issue 1.0
CHAPTER 4  CIRCUIT CARD INFORMATION
PN-DAIB (DAI)
PN-DAIB (DAI)
Location of Lamps, Switches, and Connectors
Lamp Indications
LAMP 
NAMECOLOR FUNCTION
RUN Green Flashes at 120 IPM while this card is operating normally
LINK Green Remains lit when a link between this card and a distant office is
normally connected
Goes out after 15 seconds of link disconnection
RED Red Remains lit when detecting PCM signal loss or Frame Alignment 
signal loss
RMT Red Remains lit when receiving the alarm signal from a distant office
LOOP – Not used
BL Red Remains lit while data transmission on control channel (D ch)
Flashes while FP data downloading
JPS
JPR
 
SW2
SW3BUS
CNSENSE
RUN
MB
LINK 
RED 
RMT 
LOOP 
BL
SW1
    Add page 85 to Favourites
    image text
    Enable zoom 
    							CHAPTER 4  CIRCUIT CARD INFORMATION
PN-DAIB (DAI)
NEAX2000 IVS2 Remote PIM System Manual    
ND-70917 (E), Issue 1.0   Page 77
Switch Settings
SWITCH NAMESWITCH 
NUMBERSETTING 
POSITIONFUNCTION CHECK
SENSE
(Rotary SW)
0-FAlways set to 0
1-F Not used
MB (Toggle SW)
NOTE 1
UP For make-busy
For normal operation
SW1
(Piano Key SW)1 Always set to OFF
2 Always set to OFF
3 Always set to OFF
4 Always set to OFF
(Continued)
0
ON
DOWN
4 
3 
2 
1 OFF
ON
OFF
OFF
OFF
OFF
    Add page 86 to Favourites
    image text
    Enable zoom 
    							 NEAX2000 IVS2 Remote PIM System ManualPage 78  ND-70917 (E), Issue 1.0
CHAPTER 4  CIRCUIT CARD INFORMATION
PN-DAIB (DAI)
SWITCH
NAMESWITCH
NUMBERSETTING
POSITIONFUNCTION CHECK
SW2 (DIP SW)
1ONControl channel signaling data 
transmission speed: 48 kbps
Control channel signaling data 
transmission speed: 64 kbps
2ONDTI frame configuration:
12-Multi Frame
DTI frame configuration:
24-Multi Frame
3ON Line code: AMI with ZCS
Line code: B8ZS
4ONSetting of control signal time slot
NOTE 2, NOTE 3 5ON
6ON
7
OFF
8ON
(Continued)
1
23
45
67
8ON
OFF
OFF
OFF
SWITCH NUMBER
TIME SLOT
NUMBER
45678
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
OFFON
OFF
OFF
ON
ON
OFF
OFF
ON
ON
OFF
OFF
ON
ON
OFF
OFF
ON
ON
OFF
OFF
OFFON
ON
ON
OFF
OFF
OFF
OFF
ON
ON
ON
ON
OFF
OFF
OFF
OFF
ON
ON
ON
ON
OFFON
ON
ON
ON
ON
ON
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
ON
ON
ON
ON
ONON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
OFF
OFF
OFF
OFF
OFFTS1
TS2
TS3
TS4
TS5
TS6
TS7
TS8
TS9
TS10
TS11
TS12
TS13
TS14
TS15
TS16
TS17
TS18
TS19
TS23
OFF
OFF
OFF
ON
OFF
    Add page 87 to Favourites
    image text
    Enable zoom 
    							CHAPTER 4  CIRCUIT CARD INFORMATION
PN-DAIB (DAI)
NEAX2000 IVS2 Remote PIM System Manual    
ND-70917 (E), Issue 1.0   Page 79
The figure in the SWITCH NAME column and the position in   in the SETTING POSITION
column indicate the standard setting of the switch. When the switch is not set as shown by the
figure and  , the setting of the switch varies with the system concerned.
NOTE 1:When the power is on, flip the MB switch to ON (UP position) before plugging/unplug-
ging the circuit card.
NOTE 2:Time Slot Number 0, 20, 21, and 22 (TS0/20/21/22) cannot be used for control signal.
NOTE 3:This setting must be identical with the opposite DAIA card.
SWITCH
NAMESWITCH
NUMBERSETTING
POSITIONFUNCTION CHECK
SW3 (DIP SW)
1Set the equalizer according to the 
cable length between the system 
and the CSU.
OFF
2
OFF
3
OFF
4 Always set to OFF
JPS (Jumper Pin)
UPNeutral grounding on the 
transmitting line is provided.
Neutral grounding on the 
transmitting line is not provided.
JPR (Jumper Pin)
UPNeutral grounding on the receiving 
line is provided.
Neutral grounding on the receiving 
line is not provided.
1
23
4ON
ON
SW
-1SW
-2SW
-3CABLE
LENGTH
ON ON ON0 - 40 m 
(0 - 131.2 ft.)
ON ON OFF40 - 80 m
(131.2 - 262.5 ft.)
ON OFF ON80 - 120 m
(262.5 - 394 ft.)
ON OFF OFF120 - 160 m
(394 - 525 ft.)
OFF ON ON160 - 200 m
(525 - 656 ft.)
OFF OFF OFF Signal is not sent.
ON
ON
OFF
DOWN
DOWN
    Add page 88 to Favourites
    image text
    Enable zoom 
    							 NEAX2000 IVS2 Remote PIM System ManualPage 80  ND-70917 (E), Issue 1.0
CHAPTER 4  CIRCUIT CARD INFORMATION
PN-DAIC (DAI)
PN-DAIC (DAI)
Location of Lamps, Switches, and Connectors
Lamp Indications
 
LAMP 
NAMECOLOR FUNCTION
RUN Green Flashes at 120 IPM while this card is operating normally
LINK Green Remains lit when the following connections are normal:
 Control channel link between the DAIA card and DAIB card
 Connection between the opposite DAIC card
Goes out after 15 seconds of link disconnection
RED Red Remains lit when detecting PCM signal loss or Frame Alignment
signal loss
RMT Red Remains lit when receiving the alarm signal from a distant office
LOOP – Not used
PWR – Not used
BL – Not used
 
SW2
SW3TBUS
RBUS
CNRUN
MB
LINK 
RED 
RMT 
LOOP 
PWR 
BL
SW1
    Add page 89 to Favourites
    image text
    Enable zoom 
    							CHAPTER 4  CIRCUIT CARD INFORMATION
PN-DAIC (DAI)
NEAX2000 IVS2 Remote PIM System Manual    
ND-70917 (E), Issue 1.0   Page 81
Switch Settings
SWITCH
NAMESWITCH
NUMBERSETTING
POSITIONFUNCTION CHECK
MB (Toggle SW)
NOTEUP For make-busy
For normal operation
SW1 
(Piano Key SW)1 Always set to OFF
2 Always set to OFF
3 Always set to OFF
4 Always set to OFF
SW2 (DIP SW)
1 Not used
2ONDTI frame configuration:
12-Multi Frame
DTI frame configuration:
24-Multi Frame
3ON Line code: AMI with ZCS
Line code: B8ZS
4 Not used
5 Not used
6 Not used
7 Not used
8 Not used
(Continued)
ON
DOWN
4 
3 
2 
1 OFF
ON
OFF
OFF
OFF
OFF
1
23
45
67
8ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
    Add page 90 to Favourites
    image text
    Enable zoom 
    							 NEAX2000 IVS2 Remote PIM System ManualPage 82  ND-70917 (E), Issue 1.0
CHAPTER 4  CIRCUIT CARD INFORMATION
PN-DAIC (DAI)
The figure in the SWITCH NAME column and the position in   in the SETTING POSITION
column indicate the standard setting of the switch. When the switch is not set as shown by the
figure and  , the setting of the switch varies with the system concerned.
NOTE:When the power is on, flip MB switch to ON (UP position) before plugging/unplugging
the circuit card.  SW3 (DIP SW)
1Set the equalizer according to the 
cable length between the system 
and the CSU.
OFF
2
OFF
3
OFF
4ONWhen mounting this card on 
Remote Site
OFFWhen mounting this card on Main 
Site
SWITCH
NAMESWITCH
NUMBERSETTING
POSITIONFUNCTION CHECK
1
23
4ON
ON
SW
-1SW
-2SW
-3CABLE
LENGTH
ON ON ON0 - 40 m 
(0 - 131.2 ft.)
ON ON OFF40 - 80 m
(131.2 - 262.5 ft.)
ON OFF ON80 - 120 m
(262.5 - 394 ft.)
ON OFF OFF120 - 160 m
(394 - 525 ft.)
OFF ON ON160 - 200 m
(525 - 656 ft.)
OFF OFF OFF Signal is not sent.
ON
ON
    All NEC manuals Comments (0)

    Related Manuals for NEC Neax 2000 Ivs2 Remote Pim System Manual