NEC Neax 2000 Ivs Wcs System Manual

ND-46248 (E) CHAPTER 4
Pag e 13 9
Revision 2.0
SYSTEM DATA PROGRAMMING
3.6.4 Group Call-Automatic Conference (6/10 Party) Data Assignment
To provide the Group Call-Automatic Conferrence (6/10 Party):
DESCRIPTION DATA
Assign a Conference Trunk Card Number to 
the required LEN.(1)
(2)LEN (0000-0511)
ED00-ED03: Conference Trunk Card No.
Assign the stations which belongs to each pag-
ing group, and their number within the group. 
A maximum of 9 stations can be paged simul-
taneously except the conference...

CHAPTER 4 ND-46248 (E)
Pag e 14 0
Revision 2.0
SYSTEM DATA PROGRAMMING
DESCRIPTION DATA
Assign a Group Call-Automatic Conference 
(6/10 Party) key of each paging group to the 
Multiline Terminal, if required.
Note:Even if an extension does not be-
long to the conference group, the
extension can page the confer-
ence group, and can re-partici-
pate in the conference if there is
an idle circuit on the Conference
Tr u n k .
(1)
(2)Y=00
X-XXXX: Primary Extension No. +  
+key No.
F0B00: Simultaneous Paging...

ND-46248 (E) CHAPTER 4
Pag e 14 1
Revision 2.0
SYSTEM DATA PROGRAMMING
3.6.5 Group Call-2 Way Calling
To provide the Group Call-2 Way Calling:
DESCRIPTION DATA
Assign the stations which belongs to each pag-
ing group, and their number within the group. 
A maximum of 9 stations can be paged simul-
taneously except the conference leader.
Note 1:Single line telephones, Multline
Terminals and PS can be as-
signed as the station within the
group.
A virtual-line cannot be as-
signed.
Note 2:A station can...

CHAPTER 4 ND-46248 (E)
Pag e 14 2
Revision 2.0
SYSTEM DATA PROGRAMMING
3.6.6 Multi-Line Operation-PS
DESCRIPTION DATA
Assign a PS station number to the virtual PS 
number.(1)
(2)Virtual PS No. (0001-0255)
X-XXXX: Primary PS Station No. 
Note
X-XXXX: Sub-line PS Station No. Note
Assign the sub-line PS number to each prima-
ry PS station.
(1)
(2)YY=01
X-XXXX: Primary PS Station No. 
Note
X-XXXX: Sub-line PS Station No. Note
Assign PS-ID of the sub-line PS as “NONE”.
(1)
(2)YY=21
X-XXXX: Sub-line PS...

ND-46248 (E) CHAPTER 4
Pag e 14 3
Revision 2.0
SYSTEM DATA PROGRAMMING
To assign the PS station to the line key on the Dterm, assign the following data.
DESCRIPTION DATA
Assign a virtual PS station number to the key 
number of the Dterm.
A virtual PS number of PS sub-line can be as-
signed to the key on the D
term.
(1)
(2)YY=00
Primary Extension No. +   + Key No.
X-XXXX: Virtual PS Station No.
CM90
END START, 

CHAPTER 4 ND-46248 (E)
Page 143-1 Addendum-001
Revision 2.1 MARCH, 1999
SYSTEM DATA PROGRAMMING
3.6.7 Number Sharing
DESCRIPTION DATA
Specify the combination of the main station 
and the sub station, also the contrary 
combination, as follows.
1st data: Main station (D
term My Line)
2nd data: Sub station (PS)
1st data: Sub station (PS)
2nd data: Main station (D
term My Line)
Note:As the main station number, Dterm
My Line number must be
assigned.
As the sub station number,
following number must be...

ND-46248 (E) CHAPTER 4
Addendum-001 Page 143-2
MARCH, 1999 Revision 2.1
SYSTEM DATA PROGRAMMING
DESCRIPTION DATA
Specify whether the sub station is controlled 
the same as the main station, by a Message 
Waiting lamp control signal sent from the 
MC1.
Note:This assignment is effective only
when the system is an Integrated
type.
(1)
(2)YYY=129
Service Restriction Class A of Main station 
(00-15)
0: Main station and sub station are con-
trolled.
1 : Only main station is controlled.
Provide the PS11...

CHAPTER 4 ND-46248 (E)
Page 144 Addendum-001
Revision 2.1 MARCH, 1999
SYSTEM DATA PROGRAMMING
3.6.8 Voice Mail Indication
DESCRIPTION DATA
Provide PS stations with Message Waiting 
service.
The first data should be the virtual PS number.•
(1)
(2)YY=03
X-XXXX: Virtual PS No.
0: To be providedCM13
END START 

ND-46248 (E) CHAPTER 4
Pag e 14 5
Revision 2.0
SYSTEM DATA PROGRAMMING
3.7 Multi-Site Roaming Data Assignment
According to the following procedure, assign the system data for Roaming service.
Confirming Network Numbering Plan
Confirm whether the network adopts Open Numbering System or Closed Numbering System for the net-
work numbering plan.
Note:The System data stored in the memory of the DBM (AP00) card can be saved, loaded and verified from
the MAT.
To save; Memory Area No.: A, Memory Address:...

CHAPTER 4 ND-46248 (E)
Pag e 14 6
Revision 2.0
SYSTEM DATA PROGRAMMING
3.7.1 Network Numbering Plan Assignment
DESCRIPTION DATA
Assign an access code for LCR Group 0-3.
For Closed Numbering System, assign the sec-
ond data to A29 (LCR Group 3).
(1)
(2)Y=0-3 (Numbering Group 0-3)
X-XXXX: Access Code
A26: LCR Group 0
A27: LCR Group 1
A28: LCR Group 2
A29: LCR Group 3
Specify the number of digits and the first digit 
for station number.
(1)
(2)Y=0-3 (Numbering Group 0-3)
X: First Digit of Station No.
801:...