NEC Ds2000 Software Instructions Manual

Paging
DS1000/2000 Software ManualChapter 1: Features283
Step 2: Should extension be able to make (broadcast) Paging announcements?
• In Program 0101 - Initiate All Call Page 
(page 441), enter Y to allow extensions with the 
assigned Class of Service to make All Call Paging 
announcements.
• In Program 0101 - Access Page Zone 1 
(page 441), through Program 0101 - Access Page 
Zone 7 (page 442), enter Y to allow extensions 
with the assigned Class of Service to make 
announcements into zones 1-7.
• In...

Paging
284Chapter 1: FeaturesDS1000/2000 Software Manual
Programming List
Program 0101 - Initiate All Call Page (page 441)
Enter Y to enable an extension’s ability to make an All Call Paging announcement.
Program 0101 - Access Page Zone 1 (page 441)
Enter Y to enable an extension’s ability to make a zone 1 Paging announcment.
Program 0101 - Access Page Zone 2 (page 441)
Enter Y to enable an extension’s ability to make a zone 2 Paging announcment.
Step 5: Should DSS Console have one-touch Paging?
• In...

Paging
DS1000/2000 Software ManualChapter 1: Features285
Program 0101 - Access Page Zone 3 (page 441)
Enter Y to enable an extension’s ability to make a zone 3 Paging announcment.
Program 0101 - Access Page Zone 4 (page 441)
Enter Y to enable an extension’s ability to make a zone 3 Paging announcment.
Program 0101 - Access Page Zone 5 (page 442)
Enter Y to enable an extension’s ability to make a zone 3 Paging announcment.
Program 0101 - Access Page Zone 6 (page 442)
Enter Y to enable an extension’s...

Paging
286Chapter 1: FeaturesDS1000/2000 Software Manual
Feature Operation
To make an Internal Paging announcement:
1. Lift handset.
2. Press 
ICM.
3. Dial *1 and page zone number (1-7 or 0 for All Call).
4. Make announcement and hang up.
The system may limit the length of your announcement.
OR
1. Lift handset.
2. Press Paging key.
3. Make announcement and hang up.
The system may limit the length of  your annoucement.
  User Programmable Feature
Feature Mnemonic Operation Access Level
This option is not...

Park
DS1000/2000 Software ManualChapter 1: Features287
Park
Description
Park places a trunk call in a waiting state (called a Park Orbit) so that an extension user may pick it 
up. There are two types of Park: System and Personal. Use System Park when you want to have the 
call wait in one of 10 system orbits (60-69). Personal Park allows you to Park a call at an extension 
so a co-worker can pick it up. After parking a call, a user can Page the person receiving the call and 
hang up. The paged party...

Park
288Chapter 1: FeaturesDS1000/2000 Software Manual
Distinctive Flash Rate on Recall
Park recall features a distinctive flash rate for line keys (see the chart below). This allows the keyset 
extension user to easily differentiate new calls that are ringing from Parked calls that are recalling.
Conditions
None
Default Setting
Park available.
No System Park keys assigned.
Programming Guide
Distinctive Flash Rate on Park Recall
For this type of call: You see this flash rate:
Call that you ParkedDouble...

Park
DS1000/2000 Software ManualChapter 1: Features289
Programming List
Program 0401 - Park Orbit (page 455)
Set how long a call stays in System Park Orbits 60-67 only before recalling. Note that the 
recall for orbits 68 and 69 is fixed at 5 minutes. 
Program 1701 -  Park Orbit Key (page 518)
Assign a programmable key on an extension as a Park Orbit key (code 04). The options are 
60-69 (System Park Orbits 60-69).
Program 1704 -  Park Orbit Key (page 528)
Assign a programmable key on a DSS Console as a...

Park
290Chapter 1: FeaturesDS1000/2000 Software Manual
2. Dial * + System Park Orbit (60-69).
3. Hang up.
OR
1. While on a trunk call, press Park key.
2. Hang up.
To retrieve a call from system Park orbit:
1. Lift handset.
2. Press 
ICM.
3. Dial 
* + System Park Orbit (60-69).
OR
1. Lift handset.
2. Press Park key.
To Park  a call at an extension (using Personal Park):
1. While on a trunk call, press 
ICM.
2. Dial
 * * + Number of extension at which you want to park the call (300-395 in DS2000 or...

PBX/Centrex Compatibility
DS1000/2000 Software ManualChapter 1: Features291
PBX/Centrex Compatibility
Description
DS2000 Fixed Slot
Refer to Centrex Compatibility on page 334 for more. DS2000 U Slot
DS1000 

Prime Line Preference
292Chapter 1: FeaturesDS1000/2000 Software Manual
Prime Line Preference
Description
Prime Line Preference allows a keyset user to place or answer a call by just lifting the handset. The 
user does not have to press a line key, loop key, or the ICM key first. This simplifies answering calls. 
In programming, you designate a line key, loop key, or the ICM key as a Prime Line Key. With a line 
or loop key, the trunk or trunk group assigned to that key becomes your Prime Line. With the...