NEC Ds2000 Software Instructions Manual

Reverse Voice Over
DS1000/2000 Software ManualChapter 1: Features313
Reverse Voice  Over
Description
While on a handset call, Reverse Voice Over lets a busy keyset user make a private Intercom call to 
an idle co-worker. The busy user just presses and holds down a programmed Reverse Voice Over 
key to make a private call to the assigned co-worker. The initial caller cannot hear the Reverse 
Voice Over conversation. The private Intercom call continues until the Reverse Voice Over caller 
releases the key...

Reverse Voice Over
314Chapter 1: FeaturesDS1000/2000 Software Manual
Default Setting
No Reverse Voice Over keys assigned
Programming Guide
Programming List
Program 1701 -  Reverse Voice Over Key (page 520)
Assign a keyset programmable key as a Reverse Voice Over key (code 23 followed by the 
assigned extension number).
Program 1704 -  Reverse Voice Over Key (page 530)
Assign a DSS Console programmable key as a Reverse Voice Over key (code 23 followed by 
the assigned extension number).
Other Related...

Reverse Voice Over
DS1000/2000 Software ManualChapter 1: Features315
Feature Operation
To place a Reverse Voice Over call:
1. While on a handset call, press and hold your Reverse Voice Over key.
To return to your initial caller:
1. Release your Reverse Voice Over key.
To place a call to your assigned Reverse Voice Over destination:
1. While your telephone is idle, press your Reverse Voice Over key.
You can optionally lift the handset for Privacy.Two beeps, then conversation with called co-worker....

Ring Groups
316Chapter 1: FeaturesDS1000/2000 Software Manual
Ring Groups
Description
DS2000 Fixed Slot
Available. Refer to Group Ring on page 183 for more information.e. DS2000 U Slot
DS1000 

Ringdown Extension
DS1000/2000 Software ManualChapter 1: Features317
Ringdown Extension
Description
A Ringdown Extension automatically calls a co-worker, Voice Mail, a Ring Group or a UCD Hunt-
ing group when the user lifts the handset. The call automatically goes through — there is no need 
for the user to dial digits or press additional keys. Ringdown extension are frequently used for 
lobby phones, where the caller just lifts the handset to get the information desk.
Conditions
None
Default Setting...

Ringdown Extension
318Chapter 1: FeaturesDS1000/2000 Software Manual
Feature Operation
To use Ringdown Extension:
1. Lift handset or press 
SPK.
If you hear ringing, wait for the called pary to answer. If you hear two beeps, you may 
begin speaking.
To bypass Ringdown (if your keyset is set up as a Ringdown Extension):
1. Before lifting the handset or pressing 
SPK, press one of the following:
- 
ICM
- Line key
- Programmable Function KeyTwo beeps or ringing.
ICM on. 

Ringing Line Preference
DS1000/2000 Software ManualChapter 1: Features319
Ringing Line Preference
Description
Ringing Line Preference lets a keyset user answer a ringing call by just lifting the handset. For a 
user that primarily answers calls, Ringing Line Preference ensures that ringing calls have priority. 
The tables below show the interaction between Ringing Line Preference and other features for both 
handset and headset calls.DS2000 Fixed Slot
Available. DS2000 U Slot
DS1000
Simply lift the...

Ringing Line Preference
320Chapter 1: FeaturesDS1000/2000 Software Manual
When multiple calls ring an extension simultaneously, the system services the ringing calls in the 
following order:
1.
ICM Key
2. Line Key (from lowest to highest)
3. Loop Key (from lowest to highest)
In addition, if two extensions with Ringing Line Preference answer the same trunk call simulta-
neously, the system connects the call to the lowest numbered extension.
Prime Line vs. Ringing Line Preference
Ringing Line Preference...

Ringing Line Preference
DS1000/2000 Software ManualChapter 1: Features321
Programming List
Program 1807 - Ringing Line Preference (page 553)
Enter Y to enable Ringing Line Preference.
Other Related Features
Attendant Call Queuing (page 44)
Ringing Line Preference will not answer a call ringing the Operator Call Key.
Intercom (page 227)
Ringing Line Preference answers a ringing Intercom call before a ringing trunk call.
Prime Line Preference (page 292)
Prime Line Preference overrides Ringing Line...

Save Number Dialed
322Chapter 1: FeaturesDS1000/2000 Software Manual
Save Number Dialed
Description
Save Number Dialed permits an extension user to save their last outside number and easily redial it 
later on. For example, an extension user can recall a busy or unanswered number without manually 
dialing the digits. The system retains the saved number until the user stores a new one in its place.
Save Number Dialed saves in system memory a dialed number up to 20 digits. The system remem-
bers the...