NEC Ds2000 Software Instructions Manual

Microphone Mute
DS1000/2000 Software ManualChapter 1: Features253
Microphone Mute
Description
Microphone Mute lets a keyset user turn off their phone’s Handsfree microphone at any time. 
Once activated, Microphone Mute prevents the caller from hearing Handsfree conversations in 
the user’s work area. The user can turn off the Handsfree or handset microphone while their tele-
phone is idle, busy on a call, in DND or while a call is ringing. The microphone stays off until the 
user turns it back on.
While...

Microphone Mute
254Chapter 1: FeaturesDS1000/2000 Software Manual
To deactivate Microphone Mute:
1. Press 
MIC.N/A.
MIC on.
N/A.
MIC off. 

Modem Cut-Through
DS1000/2000 Software ManualChapter 1: Features255
Modem Cut-Through
Description
The unique DS1000 Modem Cut-Through feature allows a modem connected to the system’s ana-
log modem port to achieve maximum throughput speeds on outside calls. In addition, a single line 
set plugged into the modem is a fully functinoal internal analog extension. this same single ine set 
is also the system’s power-failure telephone. It directly connexcts to an outside line if there is a 
commercial power...

Modem Cut-Through
256Chapter 1: FeaturesDS1000/2000 Software Manual
Programming List
Program 0401 - Intercom Inter-digit (page 456)
The system uses this interval for an extension going into the talk state, which affects the 
Modem Cut-Though timing. Setting this timer too short or too long could effect DTMF 
receiver usage and create blocking. Normally, you should leave this timer at its default value 
(6 seconds). Some applications may require that it be shortened, but it is recommended that it 
not be...

Monitor / Silent Monitor
DS1000/2000 Software ManualChapter 1: Features257
Monitor / Silent Monitor
Description
Monitor lets an extension user listen to the conversation at a busy extension. To implement Monitor, 
an extension user just calls a busy extension and dials the Monitor code. The busy extension and 
their caller have no indication of the intusion. There are no tones heard and there is no visual indi-
cation that monitoring is occuring. For example, Monitor could help the superisor of a...

Monitor / Silent Monitor
258Chapter 1: FeaturesDS1000/2000 Software Manual
Programming List
Program 0101 - Barge-In (Intrusion) (page 440)
In an extension’s Class of Service, enter Y to allow the extension to Barge In on another exten-
sion.
Program 1801 - Extension Class of Service Assignment (page 533)
Assign Class of Service to extensions.
Other Related Features
Attendant Position (page 46)
Since the attendant is never busy, Intercom callers cannot Monitor an attendant.
Conference (page 111)
An...

Multiple Directory Numbers
DS1000/2000 Software ManualChapter 1: Features259
Multiple Directory Numbers
Description
DS2000 Fixed Slot
See Call Coverage Keys on page 61. DS2000 U Slot
DS1000 

Music on Hold
260Chapter 1: FeaturesDS1000/2000 Software Manual
Music on Hold
Description
Music on Hold (MOH) plays music to calls on Hold, parked calls, and transferred calls. The music 
lets the caller know that their calls is waiting, not forgotten. Without Music on Hold, the system 
provides silence to these types of calls. Music on Hold is available from three sources: two internal 
beep tones and an external source connected to the CPU music input terminals.  The external source 
typically...

Music on Hold
DS1000/2000 Software ManualChapter 1: Features261
Programming Guide
Programming List
Program 0201 - Music on Hold (page 445)
Enter Y for this option to enable Music on Hold system-wide.
Program 0201 - MOH on Transfer (page 446)
Enter Y for this option to enable Music on Hold for transferred calls.Step-by-step guide for setting up Music on 
Hold
Step 1: Should the system have Music on Hold?
• In Program 0201 - Music on Hold (page 445), 
enter Y to enable Music on Hold system wide.
• In...

Music on Hold
262Chapter 1: FeaturesDS1000/2000 Software Manual
Program 1003 - MOH Source (page 510)
Assign the MOH source for the trunk. The options are:
0 - No MOH
1 - External at CPU terminals
2 - Tone 1 (low pitch)
3 - Tone 2 (high pitch)
4 - ACI port ( currently not used). 
When entering data, be sure to press VOL 
 or VOL  after entering your data. Do not press 
CONF or HOLD instead.
Other Related Features
Background Music (page 54)
Background Music and Music on Hold share the same external...